| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This enables us to extract files in the source array and ensures that we
can decompress files if the uncompressed signature is served.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Ivy Foster <escondida@iff.ink>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 882e707e40bbade0111cf3bdedbdac4d4b70453b we changed message
output to go to stdout by default, unless it was an error. The plain()
function doesn't *look* like an error function, but in practice it was
-- it's used to continue multiline messages, and all in-tree uses were
for warning/error.
This is a problem both because we're sending output to the wrong place,
and because in some cases, we were performing error logging from a
function which would otherwise return a value to be captured in a
variable using command substution.
Fix this and straighten out the API by providing two functions: one for
continuing msg output, and one which wraps this by sending output to
stderr, for continuing error output.
Change all callers to use the second function.
|
|
This was broken in commit 882e707e40bbade0111cf3bdedbdac4d4b70453b,
which changed 'plain()' messages to go to stdout, which was then
captured as the download client in question: cmdline=("Aborting...").
The result was a very confusing error message e.g.
/usr/share/makepkg/source/file.sh: line 72: $'\E[1m': command not found
or with makepkg --nocolor:
/usr/share/makepkg/source/file.sh: line 72: Aborting...: command not found
The problem here is that we checked to see if an asynchronous subshell,
in our case <(...), failed, by checking if its captured stdout is
non-empty. Which is terrible, and also a limitation of old bash. But
bash 4.4 can use wait $! to retrieve the return value of an asynchronous
subshell. Now we target that as our minimum, we can sanely handle errors
in such functions.
Losing error messages on stdout by capturing them in a variable instead
of printing them, continues to be a problem, but this will be fixed
systematically in a later commit.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If something like source=(..."#commit=") is used, e.g. due to failed
variable expansion, we try to check out an empty refspec as nothing at
all, and end up just running "git checkout". This happens because we
fail at variable expansion too -- so let's quote our variables properly
and make sure git sees this as an empty refspec, so it can error out.
Also make sure it is interpreted as a ref instead of a path.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 9c817b654996249b8022e189ee7e2692f4668431 we made these sources
extendable, and heuristically determined the correct extraction
functions to use. But our fallback for protos that didn't have an exact
extract_* function didn't take into account that 'extract_file' matches
an actual proto... so we passed the netfile in while the function
expected a file.
Solution: the function should expect a netfile too, thereby allowing us
to delay an attempted resolution of netfile -> file, to the one case
where it is actually used. This makes us slightly more efficient in the
non-file case, makes our functions a bit more consistent, and makes
file:// extraction work again.
Fixes FS#64648
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2018 NEW=2019
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Not all compression types can be detected in the seccomp sandbox, so we
need to disable it. This requires either configuring makepkg to know the
sandbox is available, or checking for file >= 5.38 in which the sandbox
option is a no-op even when seccomp is disabled.
- Requires autoconf-archive for autotools version compare macro.
- meson version comparison could be made a lot simpler using meson-git.
Fixes FS#58626
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
file 5.37 changed the gzip MIME type from application/x-gzip to
application/gzip, so support this when checking to extract source files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The right-hand side of the [[ ... = ... ]] keyword is an exception to
the general rule that quoting is unnecessary with [[
This is usually not a problem, e.g. in libmakepkg, lint_one_pkgname will
already fail if pkgname has an asterisk, but it certainly doesn't hurt
to be "more proper" and go with the spec; it is more dangerous in
repo-add, which can get caught in an infinite loop instead of safely
asserting there is no package named 'foo*'.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "tip" ref actually signifies the most recently updated branch. hg
does not support a default branch named anything other than "default",
except by creating a "@" bookmark. The correct way to explicitly update
to the default clone ref, is therefore to use one of these, rather than
"tip".
Fixes FS#62092
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to cache sources offline, makepkg creates *two* copies of every
git repo. This is a useful tradeoff for network time, but comes at the
cost of increased disk space.
Normally, git can smooth this over automagically. Whenever possible, git
objects are hardlinked to save space, but this does not work when
SRCDEST and BUILDDIR are on separate filesystems.
When the repo in question is both very large (linux.git for example is
2.2 GB) and crosses filesystem boundaries, this results in a lot of
extra disk space being used; the most likely scenario is where BUILDDIR
is a tmpfs for bonus ouch.
git(1) has a builtin feature which serves this case handily: the
--shared flag will create the info/alternates file instructing git to
not copy or hardlink or create objects/packs at all, but merely look for
them in an external location (that being the source of the clone).
The downside of using shared clones, is that if you modify and drop
commits from the original repo, or simply delete the whole repo
altogether, you break the copy. But we don't care about that here,
because
1) the BUILDDIR copy is meant to be a temporary copy strictly derived
via PKGBUILD syntax from the SRCDEST, and must be able to be
recreated at any time,
2) if the SRCDEST disappears, makepkg will redownload it, thus restoring
the objects needed by the BUILDDIR clone,
3) if the user does non-default things like hacking on the BUILDDIR copy
then deleting and re-cloning the SRCDEST may result in momentary
breakage, but ultimately should be fine -- the unique objects they
created will be stored in the BUILDDIR copy.
While it's theoretically possible that upstream will force-push to
overwrite the base tree from which makepkg is building (which they
should not do), *and* the user deleted their SRCDEST which they should
not do, *and* they saved work in makepkg's working directory which they
should not do either...
... this is an unlikely chain of events for which we should not care.
Using --shared is therefore helpful in immediately useful ways and IMHO
has no actual downsides; we should use it.
An alternative implementation would be to use worktrees. I've rejected
this since it is essentially the same as shared clones, except adding
additional restrictions on the branch namespace, and could potentially
break existing use cases such as manually handling the SRCDEST in order
to share repositories with normal working copies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New source protocols can then be
added via thirdparty libmakepkg drop-ins without requiring modifications
to source.sh
Fixes FS#49076
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
As per https://lists.archlinux.org/pipermail/arch-general/2017-July/043876.html
git doesn't check that the tag name matches what an annotated tag object
*thinks* it should be called. This is a bit of a theoretical attack and
some would argue that we should always use commits since upstream can
legitimately change a tag, but nevertheless this can result in a
downgrade attack if the git download transport was manipulated or the
upstream repository hacked.
So, check the tag blob to make sure the tag actually matches the name we
used for `git checkout`.
This really should be fixed in git itself, rather than forcing all
downstream users of git verify-tag to implement their own checks, but
the git developers disagree, see the discussion surrounding
https://public-inbox.org/git/xmqqk2hzldx8.fsf@gitster.mtv.corp.google.com/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There were a couple places where filenames beginning with "-" were not
properly guarded against by passing them after "--". Some PKGBUILD
authors are crazy, but we still take those into account.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A git repository is marked as signed if it contains the query "signed"
as defined by https://tools.ietf.org/html/rfc3986
Adds two utility functions in util/source.sh.in to extract fragments and
queries, and modifies source/git.sh.in to use them.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Most entries in $sources contain variables so finding out why a URL
fails to download is hard because one has to manually replace the
variables when looking at the PKGBUILD. Simply output the full URL here
so that it can be easily seen what is wrong.
Old:
==> ERROR: Failure while downloading example-1.2.4.tar.gz
New:
==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz
With the new format it is much more obvious that the directory name is
the culprint (1.1 vs 1.2) while the old one would not display that
information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Makes all use of ellipses consistent...
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|