Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-21makepkg: simplify run_pacman logicEli Schwartz
We don't need to check the options twice, since it is the same check both times. Instead, merge the conditionals. As far as I can tell, the only reason the checks for: - PACMAN_OPTS and - whether to use sudo were ever separated is due to the historic existence of --asroot, since the second check included a check for (( ! ASROOT )) until it was cleaned up in commit 61ba5c961e4a3536c4bbf41edb348987a9993fdb. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-21makepkg: implement locking for pacman commandsEli Schwartz
When pacman is run as root to do -S, -U, or -R, it would immediately abort if pacman is not ready for use. Instead, poll the lockfile and wait until it becomes available. Implements FS#28840 Original-patch-by: Georges Dubus <georges.dubus@compiletoi.net> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-12build: link vercmp with a static copy of libalpmEli Schwartz
This has historically been the case in autotools since we want vercmp to not break mid-transaction in an install script. For convenience, we create libalpm.a and use this to optionally generate libalpm.so (when not configured with -Dbuildstatic=true) as well as to link any binary which explicitly wishes to be built statically "with libalpm", but does not care where a function is defined. meson then treats this correctly: it builds the object file only once for both libraries, and the compiler strips out unused functionality from the final static binary. Currently the only binary which requires this is vercmp. Fixes FS#61719 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-12Add implicit fall through warningAllan McRae
Requires modification to our comment about fall through to match compilers expectations. Works for GCC and Clang. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-07libalpm: prevent 301 redirect loop from hanging the processMark Ulrich
If a mirror responds with a 301 redirect to itself, it will create an infinite redirect loop. This will cause pacman to hang, unresponsive to even a SIGINT. The result is pacman being unable to sync or download any package from a particular repo if its current mirror is stuck in a redirect loop. Setting libcurl's MAXREDIRS option effectively prevents a redirect loop from hanging the process. Signed-off-by: Mark Ulrich <mark.ulrich.86@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-07I blame everyone but me for thisAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-02-04fix various typosmorganamilo
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: lint disallowed architecture specific variablesmorganamilo
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them raise an error. This also disallows using 'any' as an architecture specific variable Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: lint disallowed variables in package()morganamilo
makepkg will now error if disallowed variables are set inside of the package function. Disallowed variables are variables that do exist, like 'makedepends' and 'pkgver' but can not be set inside of a package function. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-31libmakepkg: centralise random arrays of pkgbuild variablesmorganamilo
Refactor many of the different arrays of pkgbuild variables into scripts/libmakepkg/util/schema.sh.in. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-30makepkg: use --unneeded for pacman call in remove_deps()Allan McRae
This patch was inspired by FS#32723 which asks makepkg to install makedepends before depends. The use case is to build a package depending on a virtual package that is only provided by other packages (e.g. java-runtime in Arch Linux), but wanting to build against a specific version. Installing makedepends first (but not at the same time as depends) would allow specifying the version to build against, instead of pacman resolving to the default version when installing depends. It turns out, we can already achieve installing makedepends first by specifying dependencies only in the package function (and making sure makedepends includes everything needed). The only issue is that if we use makepkg to install the built package with the --install flag and along with the --rmdeps flag, we will try to remove any installed dependencies that are specified in the depends array in the package function. To counter this, we need to use the --unneeded flag for the pacman call. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-30libmakepkg: Add lzip ext supportChloe Kudryavtsev
lzip is a lossless data compressor designed to replace gzip and bzip2 as the standard general-purpose compressed format. - add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as - add COMPRESSLZ to makepkg.conf.in - document COMPRESSLZ - document PKGEXT with `.tar.lz` Signed-off-by: Chloe Kudryavtsev <toast@toastin.space> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: move checkdepends to the correct arraymorganamilo
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: Implement extendable signature verificationEli Schwartz
Lookup the existence of matching functions for each protocol, and fallback on the generic file handler. New verification protocols can then be added via thirdparty libmakepkg drop-ins without requiring modifications to verify_signature.sh Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: implement extendable source protocolsEli Schwartz
Lookup the existence of matching functions for each protocol, and fallback on the generic file handler. New source protocols can then be added via thirdparty libmakepkg drop-ins without requiring modifications to source.sh Fixes FS#49076 Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: optimize get_protocol to always return proto, not proto+uriEli Schwartz
e.g. git+https:// is commonly used for git repositories cloned over HTTPS, but we assume a proto with a plus in it is actually a protocol followed by some URI handler. So we might as well simplify the return value and not have to always add glob matching everywhere when checking the proto in use. This is required in order to use the proto directly in function calls, which will be used in a followup patch. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-22libmakepkg: make gettext replacements more templatedEli Schwartz
Making the undescore be translated is probably not something we need translators to think about. Additionally, a number of places which use the same text differ only by the variable being referenced, so simplifying the string means we can drop a redundant translation. Bonus: we save a few bytes here and there. \o/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21libalpm: fix minor typo in _alpm_db_usage_morganamilo
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-21Fix typo in pacman man pageAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-16libmakepkg: disallow using 'any' with other archesmorganamilo
Error if the arch array contains any and any other values. This also fixes a bug where the check for `$arch == 'any'` which only evaluated the first value in the array, meaning the rest of the values would not be linted. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-16meson: fix website targetEli Schwartz
A number of pages don't actually exist as html inside the source tree, and need to be generated even though they are manpages. This caused the website.tar.gz target to only work inside a dirty tree initially created by autotools. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14update a bunch of links for https and to adapt to changing domainsEli Schwartz
projects.archlinux.org and mailman.archlinux.org are both migrated to new domains. Transifex supports https, so encourage its use by default. Take advantage of the opportunity when updating these links, to also delist some projects that are dead. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: add a couple missing manpages from the html indexEli Schwartz
The index embeds the names of all doc subpages, and these were never updated. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14doc: keep manpages and html pages in syncEli Schwartz
We forgot to add BUILDINFO to the list of html docs. Instead of always updating things in two places, just derive the one from the other. meson did not have this problem as it already derives both lists from one template. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-14meson: fix regression that broke building libmakepkgEli Schwartz
In commit f7efa6a93d5361af610827d41045d87c7a72f2b5 we added a new file, and also wired it up to the build systems, but it got added under the wrong name in meson.build Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: return E_PKGBUILD_ERROR for nonexistent PKGBUILDEli Schwartz
This is not really an error with a "user function". Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg: simplify splitting command output into arrayEli Schwartz
Use mapfile instead of hacking around read -a with the $IFS. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg: add routine for linting $SOURCE_DATE_EPOCHEli Schwartz
This can only ever be an int, and the specification states that a malformed timestamp should be considered a fatal error. https://reproducible-builds.org/specs/source-date-epoch/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: fix unguarded use of printfEli Schwartz
paths can contain printf-unsafe chars, and printf -v is not somehow immune to this Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: check_pkgrel: Don't say "decimal" in the error messageLuke Shumaker
If you have a malformed pkgrel, the error message says that it must be a "decimal". That isn't quite true, as that would mean that `1.1 == 1.10`. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: Better error messages for versions in (check, make, ↵Luke Shumaker
opt)depends/provides/conflicts Given the depends depends=('foo>=1.2-1.par2') and the error message ==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace. One would be lead to believe that the problem is that they gave a pkgrel in depends at all, not that the pkgrel contains letters. Each of the (check,make,opt)depends, conflicts, and provides linters use a glob to trim off properly formed epoch an rel from the full version string, and pass the remainder to check_pkgver(). This does a good job of accepting/rejecting full versions, but doesn't do a good job of generating good error messages when rejecting if it's because of the epoch or rel. 1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and lint_pkgrel(), similarly to check_pkgver(). 2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and splits it in to epoch/ver/rel, and calls the appropriate check_ function on each. 3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and provides linters. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libmakepkg/lint_pkgbuild: check for invalid variables even if they're emptyEli Schwartz
Checking the length of the variable to be non-zero before considering it an error is inconsistent; license=() and depends='' and `declare arch` should be considered just as wrong. In fact the current check detects depends='' as non-zero and returns an error, but happily considers the others to be perfectly okay. A more reliable check is to simply see if the name has been declared (whether it is set or not), and then enforce that it's been declared to the right type. As an added benefit, avoiding the creation of proxy-evaled variables to count the number of indexes results in simpler code. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10Add [ignored] to -Qu output for packages in repos that are not Usage = UpgradeAllan McRae
List all available updates in -Qu output, but include [ignored] beside those that will not be updated in a -Su operation due to thier repo Usage value (in addition to those that are Ignored). Fixes FS#59854. The following people provided initial patches to print [ignored] on -Qu operations, which highlighted a larger problem to be fixed first: With-thanks-to: morganamilo <morganamilo@gmail.com> With-thanks-to: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libalpm/sync.c: change alpm_sync_newversion() to alpm_sync_get_new_version()Allan McRae
The behaviour of "pacman -Qu" was very strange... It would only consider packages from repos with Usage = Search (or All), and ignore those with Usage = Sync, Install or Upgrade. This is because the function alpm_sync_newversion() used ALPM_DB_USAGE_SEARCH for its filtering. Given this function is documented (at least in the source) to "Check for new version of pkg in sync repos", I would expect that to look at all repos. However, just changing this parameter, would result in a fairly silent change in behaviour of this function. Instead, rename the function and remove this filtering altogether. Users of this function can filter the dbs passed to this function to achieve their desired output. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10Add -fstack-clash-protection to CFLAGS in debug builds if availableAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10be_local.c: remove aligment in local_pkg_opsAllan McRae
The alignment was not overly helpful and caused unnecessary churn when a new value with longer name was added. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10libalpm: parse {check, make}depends when reading databasemorganamilo
Commit 0994893b0e6b627d45a63884ac01af7d0967eff2 added the alpm_pkg_get_{make,check}depends functions but forgot to include logic for parsing these fields from the database. As a result these functions will always return an empty list. This commit adds the parsing logic. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: fix broken check for the fakeroot binaryEli Schwartz
In commit d8ee8d0c99c3820951e2e49dbdb71a5390bd1dc4 we made use of fakeroot absolutely mandatory, and disabled a lot of the code which checked to see if this now-defunct BUILDENV option was set, before setting up the environment to use fakeroot. Unfortunately, we missed one spot. The check_software routine still checked to see if fakeroot was enabled, but due to the option being removed, thought that it was in fact disabled, and as a result this check would never run. Fix by checking to see if we are trying to build either a package or a source package, and if so, checking for fakeroot. These are the only two situations where fakeroot is needed. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: add internal variable to track when we're building a packageEli Schwartz
There are state variables for everything else, and we use them to do conditional checks on things, but it's currently a bit difficult to test whether a package is being built, as it's the default action if *no* options are specified. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04makepkg: Make pkgdir a localJan Alexander Steffens (heftig)
Causes it to be reset (to $pkgdirbase/$pkgbase) between subpackages. This shouldn't be visible. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04makepkg: Create a single-package packaging functionJan Alexander Steffens (heftig)
Merge the similar code handling unsplit PKGBUILDs and individual packages in a split PKGBUILD and make it a new function. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04makepkg: Only backup package variables onceJan Alexander Steffens (heftig)
We don't need to re-backup the variables we restored on the previous iteration. Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04libalpm/add.c: move assignment into conditional in alpm_add_pkgMichael Straube
While at it and for consistency move the assignment of the variable 'local' into the subsequent conditional. Signed-off-by: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04Move skipping of duplicate sync/remove targets into libalpmMichael Straube
sync: As pointed out by Andrew Gregory there could be an error when adding duplicates if they are two separate packages with the same name. Add a check in alpm_add_pkg() to test whether the duplicate is actually the same package, and if so, log a debug message and return success to skip the package. If the duplicate is a different package return ALPM_ERR_TRANS_DUP_TARGET and treat that error just like any other error in pacman. remove: Change alpm_remove_pkg() to just log a debug message and return success to skip duplicates. Remove the handling of ALPM_ERR_TRANS_DUP_TARGET in pacman. Also fixes FS#49377. Suggested-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04repo-add: don't break if delta package sources contain epochEli Schwartz
Our sed parser for xdelta3 headers will greedily match on ":" which coincidentally is also the character we use to define a version with an epoch. While we are at it, simply use sed for the whole pipeline, rather than using both grep and sed. Fixes FS#61195 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04repo-remove: fix removing packages with deltasEli Schwartz
We have code in order to remove deltas when removing a package, but it is never run, since we try to remove the wrong file. This was broken in commit cb0f2bd0385f447e045e2b2aab9ffa55df3c2d8a which modified the internal layout we use to modify the db, changing "tree" to "db", but did not update all locations where it was used. This worked swimmingly well as long as only repo-add updates were handling the backup and restore of the delta file, as the delta file therefore got backed up to the correct location (db) in the shared db_remove_entry() function. But later on in the repo-remove logic, we tried removing a different file that will never exist (tree). Fixes FS#53041 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04allow tests for disabled features to be skippedAndrew Gregory
Previously, pacman's test suite would fail when compiled without signature support. Adds a require_capability method to pmtest objects. Currently recognized values are 'gpg', 'curl', and 'nls'; although only gpg is used presently. Missing features are indicated by running pactest with one of the --without-<feature> options. This modifies pmenv to run each case as independent tests. Previously, a single pmenv could run multiple tests, combining there output into a single TAP stream but making it impossible to properly skip an entire test case. This change does not affect running pactest.py with a single test (as both autotools and meson do), but will affect anybody manually running pactest.py with multiple tests at once. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04tap.py: add skip_all functionAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04remove unused test summary codeAndrew Gregory
Unused since 12e00af5315135a29a66c9aaa01e141a32d4634b Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-04silence warning when built without curlAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>