Remove mkinitcpio-archiso files

archiso/initcpio/*:
Remove mkinitcpio-archiso scripts as they have been split out into a separate project.

docs/README.{altbootmethods,bootparams}:
Remove mkinitcpio-archiso specific documentation.

1 files changed, 0 insertions, 111 deletions

diff --git a/docs/README.altbootmethods b/docs/README.altbootmethods
deleted file mode 100644
index 544e49b..0000000
--- a/docs/README.altbootmethods
+++ /dev/null
@@ -1,111 +0,0 @@
-INDEX
------
-
-* Alternative boot methods (configs/releng)
-  * ISO in loopback mode
-  * ISO in memdisk mode
-  * Network booting (PXE) [first stage]
-    * DHCP + TFTP
-    * DHCP + HTTP
-    * HTTP/NFS/NBD [second stage]
-
-
-
-*** Alternative boot methods (configs/releng)
-
-ISO images names consist of: archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-
-Where:
-    <YYYY> Year
-    <MM> Month
-    <DD> Day
-
-
-** ISO in loopback mode.
-
-Note: Described method is for using with GRUB2.
-      GRUB2 is installed on target media and archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-      is at path <TARGET-PATH> on disk <D> and partition <P>,
-      where filesystem is labeled as <TARGET-FS-LABEL>.
-
-menuentry "Arch Linux (x86_64)" {
-    set isofile="/<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-x86_64.iso"
-    loopback loop (hd<D>,<P>)$isofile
-    linux (loop)/arch/boot/x86_64/vmlinuz img_label=<TARGET-FS-LABEL> img_loop=$isofile
-    initrd (loop)/arch/boot/x86_64/archiso.img
-}
-
-
-** ISO in memdisk mode.
-
-Note: Described method is for using with SYSLINUX. Anyway MEMDISK from SYSLINUX can work
-      with other bootloaders.
-      SYSLINUX is installed on target media and archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-      is at path <TARGET-PATH>.
-
-
-LABEL arch_x64
-   LINUX memdisk
-   INITRD /<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-   APPEND iso
-
-
-** Network booting (PXE).
-
-All ISOs are ready to act as PXE server, some manual steps are needed
-to setup the desired PXE boot mode.
-Alternatively it is possible to use an existing PXE server following the same logic.
-Note: Setup network first, adjust IP adresses, and respect all slashes "/".
-
-First stage is for loading kernel and initramfs via PXE, two methods described here:
-
-* DHCP + TFTP
-
-Note: All NIC firmwares should support this.
-
-# dnsmasq --port=0 \
-          --enable-tftp \
-          --tftp-root=/run/archiso/bootmnt \
-          --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=/arch/boot/syslinux/lpxelinux.0 \
-          --dhcp-option-force=209,boot/syslinux/archiso.cfg \
-          --dhcp-option-force=210,/arch/
-
-* DHCP + HTTP
-
-Note: Not all NIC firmware supports HTTP and DNS (if domain name is used).
-      At least this works with iPXE and gPXE.
-
-# dnsmasq --port=0 \
-          --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=http://192.168.0.7/arch/boot/syslinux/lpxelinux.0 \
-          --dhcp-option-force=209,boot/syslinux/archiso.cfg \
-          --dhcp-option-force=210,http://192.168.0.7/arch/
-
-
-Once the kernel is started from PXE, SquashFS files and other misc files
-inside "arch" directory must be loaded (second stage). One of the following
-methods can be used to serve the rest of live-medium.
-
-* HTTP
-
-# darkhttpd /run/archiso/bootmnt
-
-
-* NFS
-
-# echo "/run/archiso/bootmnt 192.168.0.*(ro,no_subtree_check,no_root_squash)" >> /etc/exports
-# systemctl start nfs-server.service
-
-
-* NBD
-
-Note: Adjust ARCH_201703 as needed.
-
-# cat << EOF > /tmp/nbd-server.conf
-[generic]
-[archiso]
-    readonly = true
-    exportname = /dev/disk/by-label/ARCH_201703
-EOF
-# nbd-server -C /tmp/nbd-server.conf