From a1dfa8e61f385a6b388b66f4860e96a62f3edae6 Mon Sep 17 00:00:00 2001 From: Dan McGee Date: Sat, 14 Jun 2008 11:29:29 -0500 Subject: Combine repo-add and repo-remove into one script They shared about 75% of their code, so there is no real reason we should maintain them separately. Merge the differences accordingly and add a check based on the basename of the command used to decide what behavior to follow. Signed-off-by: Dan McGee --- scripts/Makefile.am | 16 ++-- scripts/repo-add.sh.in | 93 ++++++++++++++------ scripts/repo-remove.sh.in | 211 ---------------------------------------------- 3 files changed, 76 insertions(+), 244 deletions(-) delete mode 100644 scripts/repo-remove.sh.in (limited to 'scripts') diff --git a/scripts/Makefile.am b/scripts/Makefile.am index e6c051b0..283556e3 100644 --- a/scripts/Makefile.am +++ b/scripts/Makefile.am @@ -2,18 +2,20 @@ AUTOMAKE_OPTIONS = std-options bin_SCRIPTS = \ + $(OURSCRIPTS) \ + repo-remove + +OURSCRIPTS = \ makepkg \ pacman-optimize \ rankmirrors \ - repo-add \ - repo-remove + repo-add EXTRA_DIST = \ makepkg.sh.in \ pacman-optimize.sh.in \ rankmirrors.py.in \ - repo-add.sh.in \ - repo-remove.sh.in + repo-add.sh.in # Files that should be removed, but which Automake does not know. MOSTLYCLEANFILES = $(bin_SCRIPTS) *.tmp @@ -42,7 +44,7 @@ edit = sed \ ## wrong file by accident. # two 'test' lines- make sure we can handle both sh and py type scripts # third 'test' line- make sure one of the two checks succeeded -$(bin_SCRIPTS): Makefile +$(OURSCRIPTS): Makefile rm -f $@ $@.tmp test -f $(srcdir)/$@.sh.in && $(edit) $(srcdir)/$@.sh.in >$@.tmp || true test -f $(srcdir)/$@.py.in && $(edit) $(srcdir)/$@.py.in >$@.tmp || true @@ -55,7 +57,7 @@ makepkg: $(srcdir)/makepkg.sh.in pacman-optimize: $(srcdir)/pacman-optimize.sh.in rankmirrors: $(srcdir)/rankmirrors.py.in repo-add: $(srcdir)/repo-add.sh.in -repo-remove: $(srcdir)/repo-remove.sh.in -re-pacman: $(srcdir)/re-pacman.sh.in +repo-remove: $(srcdir)/repo-add.sh.in + ln -s repo-add repo-remove # vim:set ts=2 sw=2 noet: diff --git a/scripts/repo-add.sh.in b/scripts/repo-add.sh.in index 53a7da50..b6772db6 100644 --- a/scripts/repo-add.sh.in +++ b/scripts/repo-add.sh.in @@ -1,9 +1,11 @@ #!/bin/bash # # repo-add - add a package to a given repo database file +# repo-remove - remove a package entry from a given repo database file # @configure_input@ # # Copyright (c) 2006-2008 Aaron Griffin +# Copyright (c) 2007-2008 Dan McGee # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -55,33 +57,41 @@ error() { # print usage instructions usage() { - printf "repo-add (pacman) %s\n\n" "$myver" - printf "$(gettext "Usage: %s [-q] ...\n\n")" "$0" + printf "repo-add, repo-remove (pacman) %s\n\n" "$myver" + printf "$(gettext "Usage: repo-add [-q] ...\n")" + printf "$(gettext "Usage: repo-remove [-q] ...\n\n")" printf "$(gettext "\ repo-add will update a package database by reading a package file.\n\ Multiple packages to add can be specified on the command line.\n\n")" printf "$(gettext "\ -The -q/--quiet flag will force this program to run silently except\n\ +repo-remove will update a package database by removing the package name\n\ +specified on the command line from the given repo database. Multiple\n\ +packages to remove can be specified on the command line.\n\n")" + printf "$(gettext "\ +The -q/--quiet flag to either program will force silent running except\n\ in the case of warnings or errors.\n\n")" echo "$(gettext "Example: repo-add /path/to/repo.db.tar.gz pacman-3.0.0.pkg.tar.gz")" + echo "$(gettext "Example: repo-remove /path/to/repo.db.tar.gz kernel26")" } version() { - printf "repo-add (pacman) %s\n" "$myver" + printf "repo-add, repo-remove (pacman) %s\n\n" "$myver" printf "$(gettext "\ -Copyright (C) 2006-2008 Aaron Griffin .\n\n\ +Copyright (C) 2006-2008 Aaron Griffin .\n\ +Copyright (c) 2007-2008 Dan McGee .\n\n\ This is free software; see the source for copying conditions.\n\ There is NO WARRANTY, to the extent permitted by law.\n")" } # test if a file is a repository DB +# arg1 - command name (repo-add, repo-remove) test_repo_db_file () { if [ -f "$REPO_DB_FILE" ]; then if bsdtar -tf "$REPO_DB_FILE" | grep -q "/desc"; then return 0 # YES fi - else - return 0 # YES - No database file is also allowed + elif [ "$1" == "repo-add" ]; then + return 0 # YES - No database file is also allowed if we are adding fi return 1 # NO @@ -177,14 +187,8 @@ db_write_entry() return 1 fi - # remove any other package in the DB with same name - local existing - for existing in *; do - if [ "${existing%-*-*}" = "$pkgname" ]; then - msg2 "$(gettext "Removing existing package '%s'...")" "$existing" - rm -rf "$existing" - fi - done + # remove an existing entry if it exists, ignore failures + db_remove_entry "$pkgname" # create package directory mkdir "$pkgname-$pkgver" @@ -251,6 +255,23 @@ db_write_entry() popd 2>&1 >/dev/null } # end db_write_entry +# remove existing entries from the DB +# arg1 - package name +db_remove_entry() { + pushd "$gstmpdir" 2>&1 >/dev/null + + # remove any other package in the DB with same name + local existing + for existing in *; do + if [ "${existing%-*-*}" = "$1" ]; then + msg2 "$(gettext "Removing existing package '%s'...")" "$existing" + rm -rf "$existing" + fi + done + + popd 2>&1 >/dev/null +} # end db_remove_entry + # PROGRAM START # determine whether we have gettext; make it a no-op if we do not @@ -301,10 +322,17 @@ if [ -r ~/.makepkg.conf ]; then fi # main routine -gstmpdir=$(mktemp -d /tmp/repo-add.XXXXXXXXXX) || (\ +gstmpdir=$(mktemp -d /tmp/repo-tools.XXXXXXXXXX) || (\ error "$(gettext "Cannot create temp directory for database building.")"; \ exit 1) +# figure out what program we are +cmd="$(basename $0)" +if [ "$cmd" != "repo-add" -a "$cmd" != "repo-remove" ]; then + error "$(gettext "Invalid command name '%s' specified.")" "$cmd" + exit 1 +fi + success=0 # parse arguments for arg in "$@"; do @@ -316,7 +344,7 @@ for arg in "$@"; do elif [ -z "$REPO_DB_FILE" ]; then # store absolute path to repo DB REPO_DB_FILE=$($realpath "$arg") - if ! test_repo_db_file; then + if ! test_repo_db_file $cmd; then error "$(gettext "Repository file '%s' is not a proper pacman database.")" "$REPO_DB_FILE" exit 1 elif [ -f "$REPO_DB_FILE" ]; then @@ -324,18 +352,28 @@ for arg in "$@"; do bsdtar -xf "$REPO_DB_FILE" -C "$gstmpdir" fi else - if [ -f "$arg" ]; then - if ! bsdtar -tf "$arg" .PKGINFO 2>&1 >/dev/null; then - error "$(gettext "'%s' is not a package file, skipping")" "$arg" + if [ "$cmd" == "repo-add" ]; then + if [ -f "$arg" ]; then + if ! bsdtar -tf "$arg" .PKGINFO 2>&1 >/dev/null; then + error "$(gettext "'%s' is not a package file, skipping")" "$arg" + else + msg "$(gettext "Adding package '%s'")" "$arg" + + if db_write_entry "$arg"; then + success=1 + fi + fi else - msg "$(gettext "Adding package '%s'")" "$arg" + error "$(gettext "Package '%s' not found.")" "$arg" + fi + elif [ "$cmd" == "repo-remove" ]; then + msg "$(gettext "Searching for package '%s'...")" "$arg" - if db_write_entry "$arg"; then - success=1 - fi + if db_remove_entry "$arg"; then + success=1 + else + error "$(gettext "Package matching '%s' not found.")" "$arg" fi - else - error "$(gettext "Package '%s' not found.")" "$arg" fi fi done @@ -356,6 +394,9 @@ if [ $success -eq 1 ]; then esac bsdtar -c${TAR_OPT}f "$REPO_DB_FILE" * + elif [ "$cmd" == "repo-remove" ]; then + error "$(gettext "All packages have been removed from the database. Deleting '%s'.")" "$REPO_DB_FILE" + rm "$REPO_DB_FILE" fi popd 2>&1 >/dev/null diff --git a/scripts/repo-remove.sh.in b/scripts/repo-remove.sh.in deleted file mode 100644 index a650bcfd..00000000 --- a/scripts/repo-remove.sh.in +++ /dev/null @@ -1,211 +0,0 @@ -#!/bin/bash -# -# repo-remove - remove a package entry from a given repo database file -# @configure_input@ -# -# Copyright (c) 2007-2008 Dan McGee -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# gettext initialization -export TEXTDOMAIN='pacman' -export TEXTDOMAINDIR='@localedir@' - -myver='@PACKAGE_VERSION@' -confdir='@sysconfdir@' - -QUIET=0 -REPO_DB_FILE="" - -msg() { - [ $QUIET -ne 0 ] && return - local mesg=$1; shift - printf "==> ${mesg}\n" "$@" >&1 -} - -msg2() { - [ $QUIET -ne 0 ] && return - local mesg=$1; shift - printf " -> ${mesg}\n" "$@" >&1 -} - -warning() { - local mesg=$1; shift - printf "==> $(gettext "WARNING:") ${mesg}\n" "$@" >&2 -} - -error() { - local mesg=$1; shift - printf "==> $(gettext "ERROR:") ${mesg}\n" "$@" >&2 -} - -# print usage instructions -usage() { - printf "$(gettext "repo-remove %s\n\n")" $myver - printf "$(gettext "usage: %s [-q] ...\n\n")" "$0" - printf "$(gettext "\ -repo-remove will update a package database by removing the package name\n\ -specified on the command line from the given repo database. Multiple\n\ -packages to remove can be specified on the command line.\n\n")" - printf "$(gettext "\ -The -q/--quiet flag will force this program to run silently except\n\ -in the case of warnings or errors.\n\n")" - echo "$(gettext "Example: repo-remove /path/to/repo.db.tar.gz kernel26")" -} - -version() { - printf "repo-remove (pacman) %s\n" "$myver" - printf "$(gettext "\ -Copyright (c) 2007-2008 Dan McGee .\n\n\ -This is free software; see the source for copying conditions.\n\ -There is NO WARRANTY, to the extent permitted by law.\n")" -} - -# test if a file is a repository DB -test_repo_db_file () { - if [ -f "$REPO_DB_FILE" ]; then - if bsdtar -tf "$REPO_DB_FILE" | grep -q "/desc"; then - return 0 # YES - fi - fi - - return 1 # NO -} - -# remove existing entries from the DB -db_remove_entry() { - pushd "$gstmpdir" 2>&1 >/dev/null - - # remove any other package in the DB with same name - local existing - for existing in *; do - if [ "${existing%-*-*}" = "$1" ]; then - msg2 "$(gettext "Removing existing package '%s'...")" "$existing" - rm -rf "$existing" - fi - done - - popd 2>&1 >/dev/null -} # end db_remove_entry - -# PROGRAM START - -# determine whether we have gettext; make it a no-op if we do not -if [ ! $(type -t gettext) ]; then - gettext() { - echo "$@" - } -fi - -# check for help flags -if [ "$1" = "-h" -o "$1" = "--help" ]; then - usage - exit 0 -fi - -# check for version flags -if [ "$1" = "-V" -o "$1" = "--version" ]; then - version - exit 0 -fi - -# check for correct number of args -if [ $# -lt 2 ]; then - usage - exit 1 -fi - -# check for and store the name of a realpath-like program -if [ $(type -t realpath) ]; then - realpath='realpath' -elif [ $(type -t readlink) ]; then - realpath='readlink -f' -else - error "$(gettext "Either realpath or readlink are required by repo-add.")" - exit 1 # $E_MISSING_PROGRAM -fi - -# source system and user makepkg.conf -if [ -r "$confdir/makepkg.conf" ]; then - source "$confdir/makepkg.conf" -else - error "$(gettext "%s not found. Cannot continue.")" "$confdir/makepkg.conf" - exit 1 # $E_CONFIG_ERROR -fi - -if [ -r ~/.makepkg.conf ]; then - source ~/.makepkg.conf -fi - -# main routine -gstmpdir=$(mktemp -d /tmp/repo-remove.XXXXXXXXXX) || (\ - error "$(gettext "Cannot create temp directory for database building.")"; \ - exit 1) - -success=0 -# parse arguments -for arg in "$@"; do - if [ "$arg" == "--quiet" -o "$arg" == "-q" ]; then - QUIET=1 - elif [ -z "$REPO_DB_FILE" ]; then - # store absolute path to repo DB - REPO_DB_FILE=$($realpath "$arg") - if ! test_repo_db_file; then - error "$(gettext "Repository file '%s' is not a proper pacman database.")" "$REPO_DB_FILE" - exit 1 - elif [ -f "$REPO_DB_FILE" ]; then - msg "$(gettext "Extracting database to a temporary location...")" - bsdtar -xf "$REPO_DB_FILE" -C "$gstmpdir" - fi - else - msg "$(gettext "Searching for package '%s'...")" "$arg" - - if db_remove_entry "$arg"; then - success=1 - else - error "$(gettext "Package matching '%s' not found.")" "$arg" - fi - fi -done - -# if all operations were a success, re-zip database -if [ $success -eq 1 ]; then - msg "$(gettext "Creating updated database file '%s'")" "$REPO_DB_FILE" - pushd "$gstmpdir" 2>&1 >/dev/null - - if [ -n "$(ls)" ]; then - [ -f "${REPO_DB_FILE}.old" ] && rm "${REPO_DB_FILE}.old" - [ -f "$REPO_DB_FILE" ] && mv "$REPO_DB_FILE" "${REPO_DB_FILE}.old" - - case "$DB_COMPRESSION" in - gz) TAR_OPT="z" ;; - bz2) TAR_OPT="j" ;; - *) warning "$(gettext "No compression set.")" ;; - esac - - bsdtar -c${TAR_OPT}f "$REPO_DB_FILE" * - else - error "$(gettext "All packages have been removed from the database. Deleting '%s'.")" "$REPO_DB_FILE" - rm "$REPO_DB_FILE" - fi - - popd 2>&1 >/dev/null -else - msg "$(gettext "No packages modified, nothing to do.")" -fi - -# remove the temp directory used to unzip -[ -d "$gstmpdir" ] && rm -rf "$gstmpdir" - -# vim: set ts=2 sw=2 noet: -- cgit v1.2.3-70-g09d2