From 076b6184de2b20e9b26225d93f6f3a7030504109 Mon Sep 17 00:00:00 2001 From: Eli Schwartz Date: Thu, 3 May 2018 00:10:21 -0400 Subject: Ensure better text editor automatic filetype detection Since we no longer use vim-specific modelines, use the .asciidoc file extension which is, well, reserved for asciidoc formatted files. This should presumably work everywhere without needing editor-specific workarounds and configuration. Also add a shebang to makepkg.conf to indicate it contains bash content. Signed-off-by: Eli Schwartz Signed-off-by: Allan McRae --- doc/pacman.conf.5.asciidoc | 371 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 doc/pacman.conf.5.asciidoc (limited to 'doc/pacman.conf.5.asciidoc') diff --git a/doc/pacman.conf.5.asciidoc b/doc/pacman.conf.5.asciidoc new file mode 100644 index 00000000..e5fffecf --- /dev/null +++ b/doc/pacman.conf.5.asciidoc @@ -0,0 +1,371 @@ +pacman.conf(5) +============== + +Name +---- +pacman.conf - pacman package manager configuration file + + +Synopsis +-------- +{sysconfdir}/pacman.conf + + +Description +----------- +Pacman, using linkman:libalpm[3], will attempt to read pacman.conf each time it +is invoked. This configuration file is divided into sections or repositories. +Each section defines a package repository that pacman can use when searching +for packages in '\--sync' mode. The exception to this is the options section, +which defines global options. + + +Example +------- + +-------- +# +# pacman.conf +# +[options] +NoUpgrade = etc/passwd etc/group etc/shadow +NoUpgrade = etc/fstab + +[core] +Include = /etc/pacman.d/core + +[custom] +Server = file:///home/pkgs +-------- + +NOTE: Each directive must be in CamelCase. If the case isn't respected, the +directive won't be recognized. For example. noupgrade or NOUPGRADE will not +work. + + +Options +------- +*RootDir =* /path/to/root/dir:: + Set the default root directory for pacman to install to. This option is + used if you want to install a package on a temporary mounted partition + which is "owned" by another system, or for a chroot install. + *NOTE*: If database path or log file are not specified on either the + command line or in linkman:pacman.conf[5], their default location will + be inside this root path. + +*DBPath =* /path/to/db/dir:: + Overrides the default location of the toplevel database directory. The + default is +{localstatedir}/lib/pacman/+. Most users will not need to set + this option. *NOTE*: if specified, this is an absolute path and the root + path is not automatically prepended. + +*CacheDir =* /path/to/cache/dir:: + Overrides the default location of the package cache directory. The + default is +{localstatedir}/cache/pacman/pkg/+. Multiple cache directories can be + specified, and they are tried in the order they are listed in the config + file. If a file is not found in any cache directory, it will be downloaded + to the first cache directory with write access. *NOTE*: this is an absolute + path, the root path is not automatically prepended. + +*HookDir =* /path/to/hook/dir:: + Add directories to search for alpm hooks in addition to the system hook + directory (+{datarootdir}/libalpm/hooks/+). The default is + +{sysconfdir}/pacman.d/hooks+. Multiple directories can be specified with + hooks in later directories taking precedence over hooks in earlier + directories. *NOTE*: this is an absolute path, the root path is not + automatically prepended. For more information on the alpm hooks, see + linkman:alpm-hooks[5]. + +*GPGDir =* /path/to/gpg/dir:: + Overrides the default location of the directory containing configuration + files for GnuPG. The default is +{sysconfdir}/pacman.d/gnupg/+. + This directory should contain two files: `pubring.gpg` and `trustdb.gpg`. + `pubring.gpg` holds the public keys of all packagers. `trustdb.gpg` + contains a so-called trust database, which specifies that the keys are + authentic and trusted. + *NOTE*: this is an absolute path, the root path is not automatically + prepended. + +*LogFile =* /path/to/log/file:: + Overrides the default location of the pacman log file. The default + is +{localstatedir}/log/pacman.log+. This is an absolute path and the root directory + is not prepended. + +*HoldPkg =* package ...:: + If a user tries to '\--remove' a package that's listed in `HoldPkg`, + pacman will ask for confirmation before proceeding. Shell-style glob + patterns are allowed. + +*IgnorePkg =* package ...:: + Instructs pacman to ignore any upgrades for this package when performing + a '\--sysupgrade'. Shell-style glob patterns are allowed. + +*IgnoreGroup =* group ...:: + Instructs pacman to ignore any upgrades for all packages in this + group when performing a '\--sysupgrade'. Shell-style glob patterns are + allowed. + +*Include =* /path/to/config/file:: + Include another configuration file. This file can include repositories or + general configuration options. Wildcards in the specified paths will get + expanded based on linkman:glob[7] rules. + +*Architecture =* auto | i686 | x86_64 | ...:: + If set, pacman will only allow installation of packages of the given + architecture (e.g. 'i686', 'x86_64', etc). The special value 'auto' will + use the system architecture, provided via ``uname -m''. If unset, no + architecture checks are made. *NOTE*: Packages with the special + architecture 'any' can always be installed, as they are meant to be + architecture independent. + +*XferCommand =* /path/to/command %u:: + If set, an external program will be used to download all remote files. + All instances of `%u` will be replaced with the download URL. If present, + instances of `%o` will be replaced with the local filename, plus a + ``.part'' extension, which allows programs like wget to do file resumes + properly. + + + This option is useful for users who experience problems with built-in + HTTP/FTP support, or need the more advanced proxy support that comes with + utilities like wget. + +*NoUpgrade =* file ...:: + All files listed with a `NoUpgrade` directive will never be touched during + a package install/upgrade, and the new files will be installed with a + '.pacnew' extension. + These files refer to files in the package archive, so do not include the + leading slash (the RootDir) when specifying them. Shell-style glob patterns + are allowed. It is possible to invert matches by prepending a file with + an exclamation mark. Inverted files will result in previously blacklisted + files being whitelisted again. Subsequent matches will override previous + ones. A leading literal exclamation mark or backslash needs to be escaped. + +*NoExtract =* file ...:: + All files listed with a `NoExtract` directive will never be extracted from + a package into the filesystem. This can be useful when you don't want part + of a package to be installed. For example, if your httpd root uses an + 'index.php', then you would not want the 'index.html' file to be extracted + from the 'apache' package. + These files refer to files in the package archive, so do not include the + leading slash (the RootDir) when specifying them. Shell-style glob patterns + are allowed. It is possible to invert matches by prepending a file with + an exclamation mark. Inverted files will result in previously blacklisted + files being whitelisted again. Subsequent matches will override previous + ones. A leading literal exclamation mark or backslash needs to be escaped. + +*CleanMethod =* KeepInstalled &| KeepCurrent:: + If set to `KeepInstalled` (the default), the '-Sc' operation will clean + packages that are no longer installed (not present in the local database). + If set to `KeepCurrent`, '-Sc' will clean outdated packages (not present in + any sync database). + The second behavior is useful when the package cache is shared among + multiple machines, where the local databases are usually different, but the + sync databases in use could be the same. If both values are specified, + packages are only cleaned if not installed locally and not present in any + known sync database. + +*SigLevel =* ...:: + Set the default signature verification level. For more information, see + <> below. + +*LocalFileSigLevel =* ...:: + Set the signature verification level for installing packages using the "-U" + operation on a local file. Uses the value from SigLevel as the default. + +*RemoteFileSigLevel =* ...:: + Set the signature verification level for installing packages using the "-U" + operation on a remote file URL. Uses the value from SigLevel as the default. + +*UseSyslog*:: + Log action messages through syslog(). This will insert log entries into + +{localstatedir}/log/messages+ or equivalent. + +*Color*:: + Automatically enable colors only when pacman's output is on a tty. + +*UseDelta* [= ratio]:: + Download delta files instead of complete packages if possible. Requires + the `xdelta3` program to be installed. If a ratio is specified (e.g., + `0.5`), then it is used as a cutoff for determining whether to use deltas. + Allowed values are between `0.0` and `2.0`; sensible values are between + `0.2` and `0.9`. Using a value above `1.0` is not recommended. The + default is `0.7` if left unspecified. + +*TotalDownload*:: + When downloading, display the amount downloaded, download rate, ETA, + and completed percentage of the entire download list rather + than the percent of each individual download target. The progress + bar is still based solely on the current file download. + This option won't work if XferCommand is used. + +*CheckSpace*:: + Performs an approximate check for adequate available disk space before + installing packages. + +*VerbosePkgLists*:: + Displays name, version and size of target packages formatted + as a table for upgrade, sync and remove operations. + +*DisableDownloadTimeout*:: + Disable defaults for low speed limit and timeout on downloads. Use this + if you have issues downloading files with proxy and/or security gateway. + + +Repository Sections +------------------- +Each repository section defines a section name and at least one location where +the packages can be found. The section name is defined by the string within +square brackets (the two above are 'core' and 'custom'). Repository names +must be unique and the name 'local' is reserved for the database of installed +packages. Locations are defined with the 'Server' directive and follow a URL +naming structure. If you want to use a local directory, you can specify the +full path with a ``file://'' prefix, as shown above. + +A common way to define DB locations utilizes the 'Include' directive. For each +repository defined in the configuration file, a single 'Include' directive can +contain a file that lists the servers for that repository. + +-------- +[core] +# use this server first +Server = ftp://ftp.archlinux.org/$repo/os/$arch +# next use servers as defined in the mirrorlist below +Include = {sysconfdir}/pacman.d/mirrorlist +-------- + +The order of repositories in the configuration files matters; repositories +listed first will take precedence over those listed later in the file when +packages in two repositories have identical names, regardless of version +number. + +*Include =* path:: + Include another config file. This file can include repositories or + general configuration options. Wildcards in the specified paths will get + expanded based on linkman:glob[7] rules. + +*Server =* url:: + A full URL to a location where the database, packages, and signatures (if + available) for this repository can be found. ++ +During parsing, pacman will define the `$repo` variable to the name of the +current section. This is often utilized in files specified using the 'Include' +directive so all repositories can use the same mirrorfile. pacman also defines +the `$arch` variable to the value of `Architecture`, so the same mirrorfile can +even be used for different architectures. + +*SigLevel =* ...:: + Set the signature verification level for this repository. For more + information, see <> below. + +*Usage =* ...:: + Set the usage level for this repository. This option takes a list of tokens + which must be at least one of the following: + *Sync*;; + Enables refreshes for this repository. + *Search*;; + Enables searching for this repository. + *Install*;; + Enables installation of packages from this repository during a '\--sync' + operation. + *Upgrade*;; + Allows this repository to be a valid source of packages when performing + a '\--sysupgrade'. + *All*;; + Enables all of the above features for the repository. This is the default + if not specified. ++ +Note that an enabled repository can be operated on explicitly, regardless of the Usage +level set. + + +Package and Database Signature Checking[[SC]] +--------------------------------------------- +The 'SigLevel' directive is valid in both the `[options]` and repository +sections. If used in `[options]`, it sets a default value for any repository +that does not provide the setting. + +* If set to *Never*, no signature checking will take place. +* If set to *Optional* , signatures will be checked when present, but unsigned + databases and packages will also be accepted. +* If set to *Required*, signatures will be required on all packages and + databases. + +Alternatively, you can get more fine-grained control by combining some of +the options and prefixes described below. All options in a config file are +processed in top-to-bottom, left-to-right fashion, where later options override +and/or supplement earlier ones. If 'SigLevel' is specified in a repository +section, the starting value is that from the `[options]` section, or the +built-in system default as shown below if not specified. + +The options are split into two main groups, described below. Terms used such as +``marginally trusted'' are terms used by GnuPG, for more information please +consult linkman:gpg[1]. + +When to Check:: + These options control if and when signature checks should take place. + + *Never*;; + All signature checking is suppressed, even if signatures are present. + + *Optional* (default);; + Signatures are checked if present; absence of a signature is not an + error. An invalid signature is a fatal error, as is a signature from a + key not in the keyring. + + *Required*;; + Signatures are required; absence of a signature or an invalid signature + is a fatal error, as is a signature from a key not in the keyring. + +What is Allowed:: + These options control what signatures are viewed as permissible. Note that + neither of these options allows acceptance of invalid or expired + signatures, or those from revoked keys. + + *TrustedOnly* (default);; + If a signature is checked, it must be in the keyring and fully trusted; + marginal trust does not meet this criteria. + + *TrustAll*;; + If a signature is checked, it must be in the keyring, but is not + required to be assigned a trust level (e.g., unknown or marginal + trust). + +Options in both groups can additionally be prefixed with either *Package* or +*Database*, which will cause it to only take effect on the specified object +type. For example, `PackageTrustAll` would allow marginal and unknown trust +level signatures for packages. + +The built-in default is the following: + +-------- +SigLevel = Optional TrustedOnly +-------- + + +Using Your Own Repository +------------------------- +If you have numerous custom packages of your own, it is often easier to generate +your own custom local repository than install them all with the '\--upgrade' +option. All you need to do is generate a compressed package database in the +directory with these packages so pacman can find it when run with '\--refresh'. + + repo-add /home/pkgs/custom.db.tar.gz /home/pkgs/*.pkg.tar.gz + +The above command will generate a compressed database named +'/home/pkgs/custom.db.tar.gz'. Note that the database must be of the form +'\{treename\}.db.tar.{ext}', where '\{treename\}' is the name of the section +defined in the configuration file and '\{ext\}' is a valid compression type as +documented in linkman:repo-add[8]. That's it! Now configure your custom section +in the configuration file as shown in the config example above. Pacman will now +use your package repository. If you add new packages to the repository, +remember to re-generate the database and use pacman's '\--refresh' option. + +For more information on the repo-add command, see ``repo-add \--help'' or +linkman:repo-add[8]. + + +See Also +-------- +linkman:pacman[8], linkman:libalpm[3] + +include::footer.asciidoc[] -- cgit v1.2.3-70-g09d2