| Age | Commit message (Collapse) | Author |
|---|
|
In order to support a variety of values for the --with-scriptlet-shell
configure flag, pmtest has to be aware of what kind of path was passed,
be it an absolute path or a fragment for a path lookup. For absolute
paths, leave the path alone. For fragments, search the PATH environment
var for the resolved path to the binary. In both cases, join the
resultant path to the root directory defined for the test, not a
pre-determined bin directory.
Fixes FS#31552.
With-contribution-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Teach pacman to save backup files with extension .pacsave.n, where n is a
positive integer. The current backup file shall be saved as <name>.pacsave,
while existing .pacsave.n files will be renamed to <name>.pacsave.n+1
Example:
1. You have subversion installed in your local repo. /etc/conf.d/svnserve
is a file to be backed up. It contains local modifications
2. You remove subversion from your repo. /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
2. You install subversion again
3. You edit /etc/conf.d/svnserve
4. You remove subversion. The existing /etc/conf.d/svnserve.pacsave is renamed
to /etc/conf.d/svnserve.pacsave.1 and /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Rebased from original email and adjusted for util-common usage.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is a bug that has been around since at least 2007. On a package
upgrade (either by -S or -U) a new directory could overwrite any file.
This is caused by the filelist difference calculation ignoring all
directories and thus no new directories were checked for conflicting
files on the filesystem.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
[Allan: Remove expected failure from fixed pactests]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Duplicate of sync140.py but with the alphabetical ordering of the
packages changed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide a package for removing packages with unmet dependencies.
Currently pacman removes too many packages from the transaction
(FS#30649).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This applies to a case such as when /lib is a symlink to /usr/lib. If a
package is installed which contains /lib/libfoo.so, pacman will complain
if this package is then "fixed" to contain /usr/lib/libfoo.so. Since
these have the same effective path and it exists within the same
package, ignore the conflict.
Fixes FS#30681.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
File paths are resolved if necessary during inter-package conflict
checks so that packages carrying the same effective file due to
directory symlinks on the filesystem are flagged as conflicting.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Detect a conflict between a file/symlink in one package and a directory
in another when both are being installed at once.
A side effect is the creation of conflicts between a directory symlink
and a real directory (e.g lib -> usr/lib in pkg1 and /lib in pkg2).
Given we can not guarantee pkg1 is installed before pkg2, this is a
genuine conflict.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It turns out when you set the filelist for a package to include
"usr/lib/foo" in the pactest suite, it thinks there is only the
file "usr/lib/foo" in there... No "usr/" or "usr/lib/" directory.
This makes life difficult when testing code that scrolls through
a filelist looking for directory entries.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
When using the --valgrind flag with the pactest.py script, the path
to the suppression file relies on the script being called from the
source root directory. Construct the path from the scripts location
to allow it to be called from directory.
Dan: style cleanup.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If a pacakge has a directory symlink (e.g. /lib -> usr/lib), do not
allow it to be removed if any other package is trying to install a
file into that path (e.g. /lib/foo). This is because the local
database can become invalidated if the symlink is removed after the
package with file /lib/foo is installed (sync702.py). If the symlink
is removed before the file is installed (sync701.py), the upgrade is
actually a success, but we can not guarantee the ordering so both
cases should fail.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we have a symlink to a directory (e.g. /lib -> usr/lib), then
we can not remove it if a local package thinks it has files in the
symlink directory (e.g. /lib/foo), because this will invalidate the
local file database.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Note failure to detect a conflict between files having the same
effective path across packages due to a directory symlink.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Note failure to detect a conflict between a directory in one package
and a file in the other when the directory is not currently on the
filesystem.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The wrong test file was inadvertantly committed in 44e9fdd0. Add the
correct test and tidy up the test which was committed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
etc/makepkg.conf.in
|
|
When checking if a package owns a directory, it is important to check
not only that all the files in the directory are part of the package,
but also if the directory is part of a package. This catches empty
subdirectories during conflict checking for directory to file/symlink
replacements.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When two packages own an empty directory, pacman finds no conflict when
one of those packages wants to replace the directory with a file or a
symlink. When it comes to actually extracting the new file/symlink,
pacman sees the directory is still there (we do not remove empty
directories if they are owned by a package) and refuses to extract.
Detect this potential conflict early and bail. Note that it is a
_potential_ conflict and not a guaranteed one as the other package owning
the directory could be updated or removed first which would remove
the conflict. However, pacman currently can not sort package installation
order to ensure this, so this conflict requires manual upgrade ordering.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is a bash wrapper around an awk function that parses human readable
sizes and returns their representative values in bytes, as a string. A
small test harness is added to validate the functionality.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Check for an exact match when querying ownership of files in the root.
Previously, our test was too simple and would match the the basename of
package files against the query parameter, e.g.
$ pacman -Qo config
/config is owned by cower-git 20120614-1
Adds a new test to verify this behavior, query007.py.
Fixes FS#30388.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will replace our current options parser used in pacman-key,
makepkg, and ideally elsewhere. It follows heuristics closer to that of
GNU getopt long (and thus pacman itself), with the exception that it
does not allow for options with optional arguments. Due to the way this
parser will be used, this sort of functionality will not be needed.
Instead of relying on eval+set, options are normalized into an array,
OPTRET, which callers should expect to be populated after returning from
parseopts. This avoids problems with quotes and spaces in arguments,
assuming that the user quotes properly when passing into the
application.
A new test harness for parseopts is added in test/scripts.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This has outlived its usefulness and causes more problems than it
solves. It has historically only ever been used to install pacman first.
That should not be needed given we provide the vercmp utility (which has
no library dependencies) and so calling pacman in install scripts is a
sign of poor packaging.
Work-duplicated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Python PEP-394 states that all python code should point at the
python2 or python3 symlinks at maintain cross-distro compatibility.
Note that this does not matter when calling these scripts using
"make check" as they are explictly called using the detected python
version. As this only affects manually calling these scripts, I
have not had configure/make replace the shebangs.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Conflicts:
contrib/pacsysclean.in
src/pacman/conf.h
|
|
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with
making other necessary changes to fully back this (mis)feature out until
we can do it correctly.
The quick summary here is this was not implemented correctly; provides
are not fully taken into account in this logic, and making that happen
exposes a lot of other flaws in this code that are covered up later on
in the dependency resolving process by several other pieces of
convoluted and conditional logic.
Tests have been adjusted accordingly. Some test EXISTS conditions have
been removed as we already know the package is installed locally, and we
also are checking the VERSION condition anyway.
With these two related revert commits, we do have some changes in test
pass/fail results:
* upgrade078.py: does not pass, this is due to --recursive getting
removed for -U/-S operations after this commit.
* sync302.py: the version checks have been disabled, so this test
continues to pass but has been scaled back in scope.
* sync303.py: now passes, was failing before.
* sync304.py: still failing, was failing before.
* sync305.py: now passes, was failing before.
* sync306.py: still passes, was passing before.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit 09034520325efcc2e684f05fa7a99c02bad1f5be.
Tests affected by this revert have been adjusted; additionally a few
EXIST tests have been removed where there is already a VERSION test
doing the job for us.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/alpm_list.c
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
doc/Makefile.am
|
|
Add 1 failing for the -Su case, and the same case using -S (and
passing).
This is based on a real (current) issue of upgrading staging chroots
with the new pacman in staging for a libarchive build, and a new
toolchain in testing.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Both currently marked as failing.
* sync303.py encapsulates the broken behavior reported in FS#27214.
* sync304.py shows how packages depending on a specific version of a
package in SyncFirst can cause breakage of the dependency resolver.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Adds test remove031.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
|
|
There aretwo seperate issues in the same block of file conflict
checking code here:
1) If realpath errored, such as when a symlink was broken, we would call
'continue' rather than simply exit this particular method of
resolution. This was likely just a copy-paste mistake as the previous
resolving steps all use loops where continue makes sense. Refactor
the check so we only proceed if realpath is successful, and continue
with the rest of the checks either way.
2) The real problem this code was trying to solve was canonicalizing
path component (e.g., directory) symlinks. The final component, if
not a directory, should not be handled at all in this loop. Add a
!S_ISLNK() condition to the loop so we only call this for real files.
There are few other small cleanups to the debug messages that I made
while debugging this problem- we don't need to keep printing the file
name, and ensure every block that sets resolved_conflict to true prints
a debug message so we know how it was resolved.
This fixes the expected failures from symlink010.py and symlink011.py,
while still ensuring the fix for fileconflict007.py works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These should all prevent installation, and yet two of the three tests
currently fail. Not good.
The best way to see what is going on here is to diff the three new tests
side by side- there is only a small difference between the three tests,
and that is in the destination of the symlink in question that should
never be overwritten.
symlink010.py: myprogsuffix -> myprog
symlink011.py: myprogsuffix -> broken
symlink012.py: myprogsuffix -> otherprog
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Make the output into a single block and add separators at the end
so that they do not merge into each other.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|