| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Otherwise the total progress will just match the one package and be
pretty useless.
|
|
Previously TotalDownload would switch the % download from per package to
overall. Meaning you had a choice of which information to dispplay.
Now with parallel downloads TotalDownload adds an extra progress bar.
There's no reason to have this an off by default feature. Let's just
make it always on.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows architecture to be multivalued. On x86-64 machines, this
could be something like:
Architecture = x86-64-v3 x86-64
We use the first specified Architecture value in mirrorlist $arch
variable replacement, as this is backwards-compatible and sane.
Original-patch-by: Dan McGee <dan@archlinux.org>
Patch-updated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When the download estimate is over an hour the format displayed changes
from mm:ss to hh:mm:ss. This causes everything to be out of alignment
due to the extra characters.
So instead lets just go back to --:-- when the download => 100 minutes.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On Linux, signal.h is not required to have access to the signal
constants. On FreeBSD, this is not the case and requires signal.h to be
explicitly included.
This patch adds an include for signal.h in any source file that uses it.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Total download callback called right before packages start downloaded.
But we already have an event for such event (ALPM_EVENT_PKG_RETRIEVE_START)
and it is naturally to use the event to pass information about expected
download size.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Mostly for testing.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Running "pacman -Sc" deletes /var/lib/pacman/sync/*.files.sig due to a
wrong string length being used when checking filename suffixes in that
directory. In turn, these missing signature files cause both the
corresponding "*.files" files and their signatures being forcibly
re-downloaded again when "pacman -Sy" is executed.
Since official Arch Linux repos don't use signed database files yet, this
only affects people who use custom repos with signed database files, for
which they have set the "SigLevel" directive to "Required" or
"DatabaseRequired" in /etc/pacman.conf.
Fixes FS#66472
Signed-off-by: Pascal Ernster <pacman-dev@hardfalcon.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Operations involving --sysroot and reading targets from stdin were
failing due to attempting to read targets after chrooting. Move the
chroot to happen after targets are read.
Fixes FS#68630
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With libarchive v3.5.0 we have API to fetch the digest from the mtree.
Use that to validate if the installed files are modified or not.
As always, a modified backup file will trigger a warning but will not
result in an actual failure.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The progress bar already did this. But the init event and up to date
message printed the full file name. Unify these for consistency.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We'll reuse the function in pacman with a later commit.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the recent 'multibar' interface changes TotalDownload has been disabled.
Now we have a new UI and we need to find another way to display this
information.
When 'TotalDownload' config option is enabled we are going to have an extra
progress bar at the bottom of the screen that shows how much of the entire
download has been completed.
Closes FS#68202
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Unlike the other main commands, -F was missing its top-level usage line in its
help output.
Signed-off-by: Colin Woodbury <colin@fosskers.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman -F can take both a file(s) or a package(s) as arguments. Passing a
file is more common, so adjust to show that in the help.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It requires exposing 'move cursor to the end' function in a pacman
header file. We use it as a chance to make naming of the cursor management
functions more consistent.
Note that there is still possibility of a race condition in the cursor
update logic. 'update cursor index variable' and 'send ASCII control
symbols to console' is not an atomic operation. So if an SIGINT is
received between these two action then cursor position is going to be
screwed.
Fixes FS#67973
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
At the end of download operation our code makes sure the cursor is moved
to the end of the drawing area. But 'printonly' mode has its own if() branch
that skips this cursor alignment. Add cursor_goto_end() to the 'printonly'
codepath to make sure it does not clobber previous output.
Fixes FS#68355
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
For printf in C, width is counted as bytes rather than Unicode width. [1]
> If the precision is specified, no more than that many bytes are written.
[1] Section 7.21.6, N2176, final draft for ISO/IEC 9899:2017 (C18)
Thanks Andrew Gregory for suggesting a simpler approach.
Fixes FS#59229
Signed-off-by: Chih-Hsuan Yen <yan12125@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Installing remote packages using its URL is an interesting case for ALPM
API. Unlike package sync ('pacman -S pkg1 pkg2') '-U' does not deal with
server mirror list. Thus _alpm_multi_download() should be able to
handle file download for payloads that either have 'fileurl' field
or pair of fields ('servers' and 'filepath') set.
Signature for alpm_fetch_pkgurl() has changed and it accepts an
output list that is populated with filepaths to fetched packages.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
|
|
When building with -DNDEBUG, assert statements are compiled out to
no-ops. Thus, we can't depend on assignments or other computations
occurring inside the assert().
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This removes support for autotools in favour of meson.
|
|
This is not a warning, _parse_options() returns failure without even
parsing further lines and the attempted pacman/pacman-conf program
execution immediately aborts. Warnings are for when e.g. later on if we
don't recognize a setting at all, we skip over it and have enough
confidence in this to continue executing the program.
The current implementation results in pacman-conf aborting with:
warning: config file /etc/pacman.conf, line 60: invalid value for 'ParallelDownloads' : '2.5'
error parsing '/etc/pacman.conf'
or pacman -Syu aborting with the entirely more cryptic:
warning: config file /etc/pacman.conf, line 59: invalid value for 'ParallelDownloads' : '2.5'
and this isn't just a problem for the newly added ParallelDownloads
setting, either, you could get the same problem if you specified a
broken XferCommand, but that's harder as it's more accepting of input
and you probably don't hit this except with unbalanced quotes.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was only partially implemented in the original implementation.
`pacman-conf | grep ILoveCandy` would tell you if it was set, but
querying directly by name would not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was forgotten in the initial implementation, so it was impossible
to figure out the value from a script, or correctly roundtrip the
config file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now when all callers of the old alpm_db_update() function are gone we can
remove this implementation. And then rename alpm_dbs_update() function to
alpm_db_update().
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Create a list of dload_payloads and pass it to the new _alpm_multi_*
interface.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed download requires ability to draw UI for multiple active progress
bars. To implement it we use ANSI codes to move cursor up/down and then
redraw the required progress bar.
`pacman_multibar_ui.active_downloads` field represents the list of active
downloads that correspond to progress bars.
`struct pacman_progress_bar` is a data structure for a progress bar.
In some cases (e.g. database downloads) we want to keep progress bars in order.
In some other cases (package downloads) we want to move completed items to the
top of the screen. Function `multibar_move_completed_up` allows to configure
such behavior.
Per discussion in the maillist we do not want to show download progress for
signature files.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the previous download interface the callback uses the first progress
event as 'download has started' signal. Unfortunately it does not work with
up-to-date files that never receive 'download progress' events.
Up-to-date database messages are currently handled in sync_syncdbs()
after the sequential download is completed and a result from ALPM is
received. But this is not going to work with multiplexed download
interface that returns the result only after all files are completed.
Another problem with 'first progress event is the beginning of the
download' is that such events time are unpredictable. Thus the UI progress
bar order might differ from what has been passed by client to
alpm_dbs_update() function. We actually want to keep the dbs progress bars
in a strict order.
To help to solve the given problems extend the download callback to
allow 2 more events - download started and completed. 'Download started'
events appear in the same order as in the list given by a client.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed database/files downloads will use multiple progress bars.
The UI logic is quite complicated and printing error messages while
handling multiple progress bars is going to be challenging.
Instead we are going to save all ALPM error messages to a list and flush
it at the end of the download process. Use on_progress variable that
blocks error messages printing.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It includes pacman.conf new 'ParallelDownloads' option that
specifies how many concurrent downloads cURL starts in parallel.
Add alpm_option_set_parallel_downloads() ALPM function that
allows to set this config option programmatically.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is useful for dumb terminals that do not support escape
sequences.
Signed-off-by: Ivy Foster <escondida@iff.ink>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Version colour numbers are dulled in the non-verbose transaction summary
when colours are enabled.
To prevent a regression, this patch also adds handling of strings with
ANSI codes to string_length as to not break the transaction summary's
output functions when colour codes are in the package name strings.
Signed-off-by: Carson Black <uhhadd@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Current code accidently uses noupgrade for the NoExtract directive.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use ASCII control codes to hide cursor at the pacman start and then
show the cursor when pacman finishes.
It helps to avoid annoying blinking when progress bars are re-drawn.
Cursor is reenabled if pacman expects user's input.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
'output' is a list of messages that pacman received but delayed printing
to avoid messing with UI.
Such functionality is useful for the upcoming multi-line progress bar
UI. Let's move it to a separate function.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is guaranteed less error prone than calling memset and hoping the
human gets the argument order correct.
|
|
This avoids a crash in filetarget_free() when regex support isn't
requested in files_search().
|
|
When processing the targets for -Fx, compile all the regex ahead of
time, printing an error for each that failed to compile. Then, if they all
compiled successfully, continue with printing files.
Signed-off-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The documentation of the return types of alpm_mtree_next was incorrect.
This extended into the relevant function in be_local.c.
Also, return explicit integer values, rather than the ARCHIVE_xxx values,
to avoid unnecessarily exposing frontends to libarchive internals (even
though it makes no functional difference).
Original-work-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|