| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This value is needed for reproducible builds. The reason is because
$BUILDDIR changes its behavior depending on whether it is the same as
$startdir, and the result is that we cannot know whether $srcdir (the
path that is potentially embedded into the final package) is actually
"$BUILDDIR/src" or "$BUILDDIR/$pkgbase/src".
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We now generate the scripts using their real name, install them using
meson's builtin facility instead of an install_script, and generate the
wrapper scripts in the root of the build directory, instead of a
subdirectory.
This gets us closer to resolving FS#64394.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 9c817b654996249b8022e189ee7e2692f4668431 we made these sources
extendable, and heuristically determined the correct extraction
functions to use. But our fallback for protos that didn't have an exact
extract_* function didn't take into account that 'extract_file' matches
an actual proto... so we passed the netfile in while the function
expected a file.
Solution: the function should expect a netfile too, thereby allowing us
to delay an attempted resolution of netfile -> file, to the one case
where it is actually used. This makes us slightly more efficient in the
non-file case, makes our functions a bit more consistent, and makes
file:// extraction work again.
Fixes FS#64648
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Redirect file to stdin so wc -c doesn't print a file name that needs to
be stripped.
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that library/ is fully gone, we don't need this anymore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgdelta was the last user, and it is gone now.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is a useless piece of information.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Reads PKGBUILD into an array and replaces the pkgver and pkgrel with
bash parameter substitution, then uses shell redirection to write to to
the file. Because shell redirection follows symlinks, this accomplishes
the same thing as the previous default of using the GNU-specific
--follow-symlinks sed flag.
Removes SEDPATH and SEDINPLACEFLAGS from the build systems as they are
not used elsewhere.
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Previously parseopts checked if there was an argument by checking
that the string was non-empty, resulting in empty arguments being
incorrectly considered non-existent. This change makes parseopts check
if arguments exist at all, rather than checking that they are non-empty
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Added two new functions, key_is_lsigned() and key_is_revoked()
that check whether a key has been locally signed or revoked
respectively during --populate. If the key is already signed
or revoked, it is quietly ignored.
Suggested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Matthew Sexton <wsdmatty@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
To cut down on spam during --populate, both locally signing and
revoking keys now hide the specific keys being signed or revoked,
but can be shown with --verbose. A count was added, to show the
number of keys signed/revoked during the process.
Partially Implements:
FS#64142 - pacman-key: make populate less noisy
Signed-off-by: Matthew Sexton <wsdmatty@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds a "?" suffix that can be used to indicate that an option's argument is
optional.
This allows options to have a default behaviour when the user doesn't
specify one, e.g.: --color=[when] being able to behave like --color=auto
when only --color is passed
Options with optional arguments given on the command line will be returned
in the form "--opt=optarg" and "-o=optarg". Despite that not being the
syntax for passing an argument with a shortopt (trying to pass -o=foo
would make -o's argument "=foo"), this is done to allow the caller to split
the option and its optarg easily
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Reviewed-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Fixes issue where users were allowed to run cleanup while running
--geninteg or --printsrcinfo or --packagelist, thus mixing invalid
responses into stdout.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Exclude files with hardlinks when cat'ing all the files, and do a second
run to look at each file with hardlinks, keep track of the ones we've
already operated on, and only cat each inode once. Then use "wc -c" to get
the size of all (deduplicated) files the same way we were already doing.
Original-patch-by: Ronan Pigott <rpigott@berkeley.edu>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
zipman:
read -r protects against those evil manpages whose filenames contain
backslash escapes, (muahahaha?)
IFS= read protects against filenames with:
- leading whitespace (but no one is actually stupid enough to configure
their MAN_DIRS=() in makepkg.conf with such silly directories, *right*?)
- trailing whitespace (but likewise, no one should be stupid enough to
write an uncompressed manpage for section '1 ' or something)
Also fix several other cases where we read filenames without protecting
against surrounding whitespace, or without using null-delimited
filenames when we could trivially do so.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2018 NEW=2019
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg now complains when PACKAGER is not in the format
"name <email>".
Hide this warning when PACKAGER is unset but still warn if it is set to
something out of format.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 7afe51171 attempted to add zstd compression support to repo-add,
but failed...
FS#64213
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Also caught the source of a man page not being distributed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pull all translations with >75% completion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Saving fflages breaks reproducible builds due to encoding information
specific to the filesystem that was used to build the package. This
information is not needed for packaging purposes anyway.
Including fflags also means that attempting to extract a package file as
root (or fakeroot) might result in angry warnings being printed to the
console by bsdtar, followed by a non-zero exit code, unless the user
remembers to use --no-fflags during extraction. This is unpleasant UI, even
if pacman itself won't care about these.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an email address is specified, we use --locate-key to look up the key
using WKD and keyserver as a fallback. If the key is specified as a key
ID, this doesn't work, so we use the normal keyserver-based --recv-keys.
Note that --refresh-keys still uses the keyservers exclusively for
refreshing, though the situation might potentially be improved in a new
version of GnuPG:
https://lists.gnupg.org/pipermail/gnupg-users/2019-July/062169.html
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
remove_deps is called once, at the end of clean_up() before makepkg
exit. If remove_deps returns >0 (e.g. when pressing "n" in the resulting
prompt), the error is caught by the ERR signal handler. This in turns
sends SIGUSR1 to the process group, with resulting exit code 138.
In case remove_deps fails, this patch exits makepkg with E_REMOVE_DEPS
if there was no previous error (that is, EXIT_CODE equals E_OK).
Otherwise, makepkg exits with EXIT_CODE.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When running `makepkg -i` it may be necessary to first remove make- and
checkdepends before installing the built package - for example if they
conflict each other. This is the case for wireguard-arch which
makedepends and conflicts wireguard-dkms.
Signed-off-by: Erich Eckner <git@eckner.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Without the -f option to wait, we might move on and try to delete the
logpipe before the process is completed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The logpipe fifo can remain when exiting on a non-error condition such
as recieving signals INT and USR1. This can be seen by doing either a
manual CTRL-C to interrupt the build or by sending a signal such as:
$ makepkg & sleep 5 ; kill -USR1 $!
Remove the fifo in all cases on script exit if it still exists.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Not all compression types can be detected in the seccomp sandbox, so we
need to disable it. This requires either configuring makepkg to know the
sandbox is available, or checking for file >= 5.38 in which the sandbox
option is a no-op even when seccomp is disabled.
- Requires autoconf-archive for autotools version compare macro.
- meson version comparison could be made a lot simpler using meson-git.
Fixes FS#58626
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There is no good reason to bloat the keyring by importing tons of
signatures we cannot use; drop any signatures that don't validate
against another available key (probably the master keys).
If any desired signatures get cleaned, the key can be refreshed after
importing the new signing public key.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
By default, the latest versions of GnuPG disable the Web of Trust and
refuse to import signatures from public keyservers. This is to prevent
denial of service attacks, because refusing to import signatures only if
the key size is too big, is apparently too silly to consider.
Either way, pacman needs the WoT. If pacman imports a key at all, it
means everything failed and we are in fallback mode, trying to overcome
a shortcoming in the availability of keys in the keyring package.
(This commonly means the user needs to acquire a new key during the same
transaction that updates archlinux-keyring.)
In order for that new key to be usable, it *must* also import signatures
from the Master Keys.
I don't give credence to this supposed DoS, since the worst case
scenario is nothing happening and needing to CTRL+C in order to exit the
program. In the case of pacman, this is better than being unable to
install anything at all (which is gnupg doing a much more harmful DoS to
pacman), and in the already unusual case where something like
--refresh-keys is being used directly instead of depending on the
keyring package itself, gnupg supports WKD out of the box and will
prefer that for people whose keys are marketed as being non-DOSable.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an option is a two-part option, we print both (separated by IFS=' '),
but when grepping to see if it already exists, we only checked the first
component. This means that something like keyserver-options could only
check if there were existing keyserver options of any sort, but not
which ones.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The rust language supports $RUSTFLAGS to be used automatically in all
rustc invocations. Allow setting this in makepkg.conf (e.g. for
optimization or debuginfo support), and teach debug+strip to pass the
rustc command line argument necessary to rewrite source file paths in
the debugging symbols.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman should be able to extract an email address from PACKAGER for WKD
lookup, so issue a warning if it is not of the form
"Example Name <email@address.invalid>". Neither the name nor the email
address must contain additional angle brackets.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
An artificial symbol can be produced when requesting debugging symbols
and the compiler has inlined a function. These symbols will give
spurious results when listing source files for inclusion in debug
packages. This will ignore these symbols and avoid an error that can be
generated when creating a debug package.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
bash uses POSIX extended regular expressions via regex(3), which does
not guarantee support for shorthand character classes. Although glibc
supports it, msys2-runtime does not.
Make sure the completion script works (hopefully) everywhere by being
more portable.
Fixes: https://github.com/msys2/MSYS2-packages/pull/1549
Original-patch-by: plotasse <platos@protonmail.ch>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#63000
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgname and pkgver are used as directory names within database files.
libarchive does not provide a reliable locale-independent method for
reading archive file names, causing errors when archive paths include
non-ascii characters.
This is a first step toward dealing with FS#49342, by hopefully reducing
the number of packages with non-ascii data in the wild before updating
libalpm to reject them outright.
See https://github.com/libarchive/libarchive/wiki/Filenames
and https://github.com/libarchive/libarchive/issues/587
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When scripting/automating around makepkg, it is sometimes desirable to
know how makepkg will be configured to operate. One example is the
archlinux devtools, which must forward select makepkg.conf variables
into a build chroot (for example PACKAGER) or use those variables itself
(for example {SRC,PKG,LOG}DEST).
The configuration file can be in up to 3 places, and should be capable
of being overridden via environment variables. It is sufficiently
complex to represent distinct functionality, and sufficiently useful to
merit easy accessibility in other scripts, therefore, let us move it
into a publicly exposed utility library.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These variables must begin with .src.tar / .pkg.tar respectively, so
fail early if those expectations are not matched. This prevents makepkg
from creating e.g. package files literally named "./pacman-5.1.3-1-x86_64"
which are actually uncompressed tarballs.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Implements FS#17752
Signed-off-by: Luca Bertozzi <ekarndam@autistici.org>
|