| Age | Commit message (Collapse) | Author |
|---|
|
verification.
The current way of extracting key trust from output of gpg --verify is not very
robust against changes in the format of said output. As a result, pacman-key
can return an error even if the signature is actuall good.
This change relaxes the regexp when parsing output of gpg.
Signed-off-by: Leonid Isaev <leonid.isaev@jila.colorado.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit 892a1076c00a2b0097145c35f5d8ef590216dac0)
|
|
Using "-exec command {} +" systax exits on any error. Such errors occur when
running rmdir on a non-empty directory. Switch to "{} ;" syntax instead which
avoids exiting before the find command is completed.
Fixes FS#48515.
Note, we can not use "-empty" in the find command because it is not supported
by Busybox find, and the "--ignore-fail-on-non-empty" flag for rmdir is not
available on BSD rmdir variants.
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit baf1ff64e6ea23e93f307480480d87159cd2e487)
|
|
This happened to work for the majority of cases because the only calling
function used a variable named "i" that was related to the variable being
passed to the function.
Fixes FS#48340.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is partial revert of 8454daa7feef (makepkg: run pkgver() and
prepare() with --noextract).
Reasoning for the reversion (copied from FS#43498):
Running prepare() when --noextract is used no longer allows running
'makepkg -o && makepkg -e' with any PKGBUILD that applies patches in
prepare(). [1]
Sure there's --noprepare which restores the old behavior, but that's
a lot of extra typing for what I believe is a much more common use
of --noextract.
For OP's use case of doing git bisects, you can specify the commit
in the source array and thus skip --noextract since makepkg will
checkout the correct commit each time.
[1] I often extract the sources using 'makepkg -o', manually edit
some source files, and then use 'makepkg -e' to package it (while
possibly repeating the edit/package steps).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This avoids introducing unnecessary changes to the time stamp into
package repositories that regularly use --printsrcinfo to update the
.SRCINFO file.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reverts commit f9423cfa5d5b9f2041b70676438082faad1cd1ee.
This created issue when building packages with debug info multiple times.
It could be fixed, but it confirmed my initial opinion that keeping other
directories in $pkgdirbase was wrong. Use different BUILDDIRs if you want
to build different things from a single PKGBUILD.
|
|
Commit 663c74150ab4ba6d3adc55b0e3f539557a16e352
(makepkg: merge arch dependent variables after PKGBUILD linting) broke
"makepkg -g" on a PKGBUILD which did not include the current architecture, by
moving the lint_pkgbuild call before GENINTEG was processed.
Fix that by setting IGNOREARCH for the "-g" option.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extract array detection into its own utility function that ensures
extglob is enabled.
Suggested-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Bug introduced with commit 8454daa7.
Reported-by: Zuyi Hu <hzy068808@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Most entries in $sources contain variables so finding out why a URL
fails to download is hard because one has to manually replace the
variables when looking at the PKGBUILD. Simply output the full URL here
so that it can be easily seen what is wrong.
Old:
==> ERROR: Failure while downloading example-1.2.4.tar.gz
New:
==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz
With the new format it is much more obvious that the directory name is
the culprint (1.1 vs 1.2) while the old one would not display that
information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Modifications made to the source before running with --noextract may alter
the version string returned by pkgver(). Always run this function if present
and check build status before proceeding. Fixes FS#46800.
Also run prepare() when --noextract is used (unless --noprepare is specified).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This information can be used to reproduce build conditions, which can then be
used to determine if a package builds reproducibly.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Approach the detection of variables of the wrong type using an approach
similar to that used for construction of .SRCINFO files. While doing silly
things in bash could still result in false negatives, this approach should
be very robust to generatinf false positives results.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Behaviour changed in commit dce82f9d.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Set the return value to be local and always explictly returns it.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Negative subscripts to indexed arrays are not supported before 4.2. However,
since substring expansion works on arrays, we can specify an offset of -1 to
be taken relative to one greater than the maximum index of the specified
array (see Parameter Expansion section of the bash man page). This works with
both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman.
Signed-off-by: Aaron Campbell <aaron@monkey.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This file was renamed during review and its entry in POTFILES.in was not
updated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
run_split_packaging did not preserve the $pkgname array correctly, and
would create duplicate entries in the list during restore.
After restoring the backup (a b c) would become (a b c b c).
This probably went unnoticed because during --install, pacman would
reconcile the duplicates.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
ccache expects further compiler wrappers to be specified via
CCACHE_PREFIX. Otherwise, ccache will hash the wrapper executable
instead of the real one.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg used to check OPTIONS too, which could override
BUILDENV. Implement a new function that handles these
options more like OPTIONS.
This also reduces code duplication a bit.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Makes all use of ellipses consistent...
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The return value was being assigned when an error was found in a PKGBUILD's
arch array but it never was returned.
Also remove error message explaining about adding the arch array to a PKGBUILD.
That was added a long time ago when the arch array first became compulsory.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This variable is no longer in VCS building.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When extracting variables from PKGBUILD (e.g. for .SRCINFO creation) we make
assumptions about whether variables are arrays or not. This adds a check to
the PKGBUILD linter to ensure variables are arrays or not as appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed
command on build.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "ko_KR" locale is the same as the "ko" locale. Remove the "ko_KR" variant
as it is incomplete and has been superseded by "ko" on transifex.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
f170a94c137d355 potentially causes $pkgdirbase/$pkg to be undeleteable
with -R or -C if a previous build was interrupted. We simply can't
traverse to this directory, and rm blows up.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pacman cannot handle armored signatures, so make repo-add error out if
one is detected.
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This commit adds a makepkg option to generate and print the SRCINFO file
for a PKGBUILD, required by the new AUR, to stdout.
AUR 4.0 will use Git instead of source tarballs for uploading packages,
so making makepkg capable of printing the SRCINFO would simplify package
management, instead of having to extract it from a source tarball.
It is also useful for scripting other things, so that instead of having
to parse PKGBUILDs, one can make makepkg generate the SRCINFO and then
you can parse that instead, which is much simpler and less error-prone.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pacman cannot handle armored signatures, so use gpg's --no-armor flag to
force an unarmored signature.
Signed-off-by: Allan McRae <allan@archlinux.org>
|