Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/scripts/makepkg.sh.in
AgeCommit message (Collapse)Author
2009-12-13makepkg: skip devel_check() when repackagingNezmer
Currently, "makepkg -R" creates a package with a wrong updated $pkgver. Signed-off-by: Nezmer <Nezmer@allurelinux.org> [Allan: adjusted comment] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: limit sudo usage to allowed pacman commandsCedric Staniewski
This is particularly useful when using pacman wrappers which call sudo by themselves and therefore should not be run as root. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: allow to specify an alternative pacman commandCedric Staniewski
If PACMAN environment variable is set, makepkg will try to use this command to check for installed dependencies and to install or remove packages. Otherwise, makepkg will fall back to pacman. Implements FS#13028. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: move envvar section in manpage] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: check for references to build root in packageAllan McRae
Add a check that the package does not contain references to the folder it was built in. Fixes FS#14751 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: allow specifying subsets of packages to buildAllan McRae
This allows makepkg to only build a specified subset of packages from a split PKGBUILD. This is very useful in combination with the -R flag or when bumping the pkgrel of a single package. Fixes FS#15956. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: move pacman calls to a functionCedric Staniewski
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: Place packages symlinks in build dir when PKGDEST is usedEric Bélanger
When PKGDEST is used, symlinks to the packages will be put in the build directory. This combines the convenience of a global package cache with the ease of having a package (i.e. a symlink) in the build directory for testing and installation purpose. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> [Allan: add comment documenting clean-up addition] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30Replace an ugly while [ with a for (( loopIsaac Good
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Fixed logging for split packagesEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: allow the use of only a package() functionCedric Staniewski
For some packages, generally the 'any' arch ones, a build step is not required and therefore can be skipped. In these cases, a package() function without a build() one is sufficient. As a side effect, this commit makes meta packages without any function at all in the PKGBUILD possible. Fixes FS#15147. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: extend test for hyphen prefixes to pkgbase and all pkgnamesCedric Staniewski
Since commit fb97d32, which brought in this test, support for split PKGBUILDs was added, and therefore, all values of pkgname and also pkgbase have to be checked now. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Add fallback to package functionAllan McRae
makepkg looks for a package() function when building a single package but package_$pkgname() style package functions when building a split package. This patch allows the use of a package_$pkgname() function when building a single package for consistency. This is achieved by having makepkg consider a non-split package with a package_$pkgname() function as a split package (creating just the one package). Fixes FS#16622. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: use bash test operators, part twoIsaac Good
* FS#16623, second half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: use bash test operators, part oneIsaac Good
* FS#16623, first half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> [Dan: made commit message useful] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Clarified error message when a sourceball exist alreadyEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: fix abortion after sourcing /etc/profileCedric Staniewski
The source command triggers / might trigger the ERR trap which makes makepkg abort right after a successful installation of missing dependencies. Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this solution. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-10Merge branch 'maint'Dan McGee
2009-11-10makepkg: quote arrays in order to preserve spaces in array itemsCedric Staniewski
Fixes FS#16871 and makes the pkgdesc workaround obsolete. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-26Merge branch 'maint'Dan McGee
2009-10-24makepkg: allow passing arguments with spacesAllan McRae
Currently makepkg takes the commandline arguments, assigns them to a variable and passes that variable to the next makepkg call (within fakeroot). Use a comination of quotes and arrays in this process to ensure any arguments passed within quotes and containing spaces stay as a single argument during the second makepkg call. Thanks to Dan for figuring out how to get this working. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24Merge branch 'maint'Dan McGee
2009-10-24makepkg: change preselected option for cleaning the cache from Y to NCedric Staniewski
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: use tput for terminal-safe colored and bold textCedric Staniewski
Suggested-by: Dan McGee <dan@archlinux.org> Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: define escape sequences globallyCedric Staniewski
In doing so, it is possible to get rid of all the tests for colored messages except for one global one. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: check for non-empty pkgbase instead of pkgnameCedric Staniewski
pkgbase is used in the following rm calls, and since pkgname can be present when pkgbase is not, it is safer to check for pkgbase. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: remove empty .part files after a failed downloadCedric Staniewski
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: fix testing for built package presenceAllan McRae
Commit c7e4d10d introduced a small error in the testing of whether a package is already built. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding arch in split packagesAllan McRae
This allows building a mixture of binary and arch=any packages. Fixes FS#15955. The value of CARCH is no longer overridden to "any" in when arch=any is used and the assigning of the "any" arch is delayed to during the packaging stage. Adjustments were required to fix installing and checking for pre-built packages of varing arches. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding pkgver and pkgrel in split packagesAllan McRae
Fixing a single package within a split package requires the overriding or pkgrel. In very rare (but existing) cases, it is useful to override pkgver. Partial fix for FS#15955. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg, repo-add: replace external commands with bash substitutions where ↵Cedric Staniewski
possible This also removes the awk dependency from makepkg and repo-add. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Introduce new PKGBUILD variable `changelog`Cedric Staniewski
Currently, a changelog is added to a package if a specific file with a hardcoded name exists in the PKGBUILD's directory. This approach is not pretty and also inconsistent with the handling of install files, but it works. With the introduction of split PKGBUILDs, however, a drawback in this old behavior has arisen: you only have the possibility to include one specific changelog file in either every package defined in the PKGBUILD or in none. The use of an additional variable, `changelog`, works around this issue and makes it possible to include a changelog in only some of the packages, and besides, each package of the PKGBUILD can have its own changelog file. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-22makepkg: tidy usage outputAllan McRae
Various tidying to the usage output - change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal - re-alphabetise options, including moving all long only opts to the end - use same indentation for additional pacman options - remove useless comment Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-20Merge branch 'maint'Dan McGee
Message updates made this one a bit messy, but nothing too bad. Conflicts: lib/libalpm/add.c lib/libalpm/remove.c
2009-09-16String improvementsXavier Chantry
Add more untranslated strings, improve consistency, etc. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06sanity check for optdepends syntaxXavier Chantry
only allow optdepends like: pkgname: description some (real) examples of invalid optdepends: 'tcl, python and/or ruby: to use corresponding binding' 'xorg-fonts-75dpi : X bitmap fonts needed for the interface' 'ruby-htmlentities (AUR): for one provider named Deastore' 'xpdf - for pdf' Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Allan: rebase off de39a1f6 and adjust man page] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06makepkg : check for invalid backup entryXavier Chantry
This implements FS#13551 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06makepkg : refactor run_build and run_packageXavier Chantry
These two functions were very similar. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06makepkg: exit on error during build() or package()Henning Garus
Set the ERR trap to abort upon encountering an error during the execution of a build or package function. Activate set -E, which lets functions inherit the ERR trap. Signed-off-by: Henning Garus <henning.garus@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Merge branch 'maint'Dan McGee
2009-09-06fix typos in makepkg.sh.inFrancois Charette
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06makepkg: always keep sources symlinksXavier Chantry
Make bunzip2/xz/gunzip decompressing to stdout, because gzip does not offer something like a -k option. The selection of the decompression command for gzip/bzip2/xz compressed files now also depends on the file suffix, since we need to strip the extensions to get the output filename. Thanks to Cedric Staniewski <cedric@gmx.ca> for reporting this issue and contributing patches. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06makepkg: new --skipinteg optionXavier Chantry
Implements FS#15830 This option allows to build a PKGBUILD with no checksums Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-08Merge branch 'maint'Dan McGee
2009-08-08Be consistent with naming of handle_deps functionAllan McRae
All other "dep" functions (check_deps, resolve_deps, remove_deps) have underscores separating words. Being consistent, convert handledeps to handle_deps. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-08Remove builddeps from option parserAllan McRae
Leftover from commit ae5ef3b9 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-08makepkg: change to pkgdir before creating PKGINFO fileAllan McRae
Commit 01f9ae63 moved that creation of the PKGINFO file to before changing to pkgdir. This causes issues when using the -R option (FS#15851). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-26Do not allow pkgnames to start with a hyphenCedric Staniewski
Commandline arguments starting with a hyphen are usually recognized as options by unix tools. Therefore, allowing hyphens at the beginning of a package name requires a different handling of pkgnames as suggested by rm's manpage. It would be possible to make the scripts 'hyphen-safe', but hyphen-prefixed packages will cause trouble for pacman users which do not know these tricks. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> [Dan: remove the repo-add check] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-26Revert "makepkg: Exit on failure within build() or package() functions"Dan McGee
As reported in FS#15210, we have some problems with split packages and variable overrides because of this patch. For now, in prep for a release, it is best to back it out and see what we can do later. This reverts commit 621aa26e26fcf578221051e896d6440a0095b8a3. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-22makepkg: add pkgbase to .PKGINFO and database for split packagesAllan McRae
With split packages, the pkgbase variable provides a useful way to find out which packages were build from the same PKGBUILD. Add it to the packages .PKGINFO file and the repo database only when package splitting is used. Original-patch-by: Pierre Schmitz <pierre@archlinux.de> [Allan: restrict to including only with spilt packages and include after pkgname] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-12makepkg: clean up BUILDSCRIPT usageAllan McRae
FS#15448 (which is made worse by the "fix" for FS#14727...), highlighted some deficiencies in the usage of the BUILDSCRIPT variable. In particular, only relative paths worked with "-p" and some output was very strange in combination with the "-p" flag or reading from /dev/stdin. e.g. "Please add a license line to your /dev/stdin!". This patch adds a new variable, BUILDFILE, which contains the full path to the BUILDSCRIPT. This defaults to $startdir/$BUILDSCRIPT. Also, fix a missed quoting of $BUILD{SCRIPT->FILE} and remove warning about missing BUILDSCRIPT definition in makepkg.conf as the default BUILDSCRIPT value is now specified during configure. Add check that BUILDFILE is writable before updating VCS PKGBUILDs. When making a source package, the BUILDSCRIPT always gets given the default name, regardless of what it was originally called. Signed-off-by: Allan McRae <allan@archlinux.org>