| Age | Commit message (Collapse) | Author |
|---|
|
The frament element of a vcs url may contain the "#" charcter in the
(e.g) branch or tag name.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The list of which download protocol should look in makepkg.conf for the
download agent was hard coded into makepkg. Instead, fallback to checking
the the download agents array for any non-local or (implemented) vcs
source.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This will make the checksum of man pages match across architectures
despite different build times.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Creating the working directory can waste a lot of space.
Fixes FS#31221.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
|
|
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
|
|
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
|
|
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
If a pkgver() function is specified, delay checking the package is
built until the pkgver is updated..
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Supported fragments are branch, revision and tag.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a PKGBUILD has a pkgver() function, skip checking the pkgver validity
until it has been updated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Do not update VCS sources if --holdver is used. If the VCS checkout
is not present, it will still be downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
VCS sources are not needed for --geninteg or --source operations.
This also prevents VCS downloads outputting to stdout, which
prevented piping -g output to the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
myver is a bit generic for an internal variable name.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Allow SVN repo sources in the form:
source=("<folder>::<repo>#<fragment>")
where <repo> must start with svn (e.g svn+http://) and a <fragment>
can specify a revision (e.g. revision=22).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that VCS repos are provided in the source array, it becomes too
complicated to have automatic updating pkgver as was the case with
the old VCS PKGBUILDs (there can be multiple repos of different types
in the source array, the VCS repo may not be the package primary
source, etc).
Instead provide an optional way for a PKGBUILD to update the pkgver
value through the specifing of a pkgver() function that returns the
new version string. This is run after all source files are downloaded
so can access the VCS repo if needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With VCS sources, get_filepath should return the directory of the
checkout. This allows backing up of the VCS checkout when using
--allsource. Fixes FS#21098.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Modify get_filename to return the name of the folder with VCS sources.
This fixes output issues in checksum checking.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
VCS sources should have "SKIP" for their checksum value
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Allow specifing GIT sources using the following syntax
source=('<folder>::<repo>#<fragment>')
This will download the git repo <repo> into <folder> (into $SRCDIR
if set, otherwise $startdir). <repo> must start with "git", but
non-git protocols are handled using (e.g.) "git+http://...".
The <fragment> can be used to specify a branch, tag, or commit to
build from. e.g. branch=maint.
Checksum entries for git sources should be "SKIP".
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If "SKIP" is provided for an integrity check, abort checking as soon
as possible.
Also swap fork to tr for bash4 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to treat all VCS sources as URLs, we need to be able to
deal with more protocols. Rewrite download_sources to use a case
statement so additional protocols are easily added.
Also fix the use of scp to not pass the protocol in the URL
(noticed by William J. Bowman <wjb@williamjbowman.com>)
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extract the download protocol from a source entry. Returns "local"
for local source files.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There is no actual code change here, but these related functions
were all over the place which makes this code difficult to adjust.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
prepare is run after the source extraction, and is not run with
--noextract option.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This extra newline leaves a gap that looks strange in of itself,
but is highlighted when piping -g output to a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
I have noticed that quite a number of packages fail with "makepkg -R"
when their (make)dependencies are not installed. Adjust makepkg to
check for dependencies when used with -R. This can still be avoided
by using --nodeps/-d.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
directories.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
|
|
This is already being used (despite not working...) in packages
in the Arch Linux repos.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allow makepkg to work correctly when used with find from busybox.
Fix handling of cross directory symlinks.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rewrite the handling of libdepends. The primary advantage are:
- Moves functionality from write_pkginfo() to find_libdepends().
- The order of the depends array in the PKGBUILD is kept in the package.
- An unneeded libdepends is only a warning and not an error. This allows
putting a libdepend on a library that is dlopened.
- It is now modular so can be extended to library types other than
ELF *.so.
- Finding the list of libraries a package depends only occurs when a
libdepend is specified in the depends array.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently there is no way to access the makedepends for a package
apart from parsing its PKGBUILD. Put these into the .PKGINFO file
with the idea of making them available in the repo dbs so that
automated build tools can readily determine build order.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add CPPFLAGS support in addition to the current CFLAGS and CXXFLAGS.
This keeps compiler flags split up in the same logical way done
everywhere else.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With bash4 as a requirement, we can use mapfile when reading command
output into an array. mapfile has the advantage of using block buffered
I/O rather than line buffered I/O, making it slightly faster for most
jobs.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
get_pkg_arch checked for the arch variable being overridden in the
package_$1() function when used with a package as a parameter.
However, when there was no override, it did not fall back to the
global value.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Instead of creating a subshell for each of these checks (of which there
are many), pass in an expected value and make the check_* function do
the comparison for us, returning 0 (match), 1, (mismatch), or 127 (not
found).
For a measureable benefit, I tested this on a fairly simple package,
perl-term-readkey, and counted the number of clone(2) syscalls to try
and isolate those generated by makepkg itself, rather than the user
defined functions. Results as shown below:
336 before
180 after
So, roughly a 50% reduction, which makes sense given that a single
check_option() call could be up to 3 subprocesses in total.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Also prevent "sudo" and "su" from being translated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This fixes a lot of checks done by makepkg (e.g. to see if a package
is already built and choosing which package to install). Previously,
if a package had both "i686" and "any" versions, the "i686" one
always took precidence regardless of the value of "arch" in the
PKGBUILD for that package. Fixes FS#27204.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Conflicts:
scripts/repo-add.sh.in
|
|
Avoid letting the error message from parseopts get lost in the usage
output from pacman-key and makepkg (which is already verbose).
|
|
Make this option additive, so that the following two operations are
equivalent:
makepkg --pkg foo --pkg bar
makepkg --pkg foo,bar
|