| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checksums arrays should be filled with values provided by upstream. We
currently have md5 set as an unsecure default, and are constantly asked to
change it to sha2. However, just changing the default to a stronger checksum
gives the user the impression that "makepkg -g" checksums are perfect.
Instead, change the default checksum to a CRC, to make it clear that any
checksum generated purely by "makepkg -g" is not ideal.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extracting function variables containing arbitrarily scoped variables of
arbitrary nature is a disaster, but let's at least cover the common case
of using the actual '$pkgname' in an install/changelog file. It's the
odd case of actually being basically justified use of disambiguating
between the same variable used in multiple different split packages...
and also, --printsrcinfo already uses and overwrites the variable
'pkgname' in pkgbuild_extract_to_srcinfo, so this "works" in .SRCINFO
but doesn't work in .src.tar.gz
It doesn't work in lint_pkgbuild either, but in that case the problem is
being too permissive, not too restrictive -- we might end up checking
the same file twice, and printing that it is missing twice.
Fixes FS#64932
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 9c817b654996249b8022e189ee7e2692f4668431 we made these sources
extendable, and heuristically determined the correct extraction
functions to use. But our fallback for protos that didn't have an exact
extract_* function didn't take into account that 'extract_file' matches
an actual proto... so we passed the netfile in while the function
expected a file.
Solution: the function should expect a netfile too, thereby allowing us
to delay an attempted resolution of netfile -> file, to the one case
where it is actually used. This makes us slightly more efficient in the
non-file case, makes our functions a bit more consistent, and makes
file:// extraction work again.
Fixes FS#64648
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Previously parseopts checked if there was an argument by checking
that the string was non-empty, resulting in empty arguments being
incorrectly considered non-existent. This change makes parseopts check
if arguments exist at all, rather than checking that they are non-empty
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds a "?" suffix that can be used to indicate that an option's argument is
optional.
This allows options to have a default behaviour when the user doesn't
specify one, e.g.: --color=[when] being able to behave like --color=auto
when only --color is passed
Options with optional arguments given on the command line will be returned
in the form "--opt=optarg" and "-o=optarg". Despite that not being the
syntax for passing an argument with a shortopt (trying to pass -o=foo
would make -o's argument "=foo"), this is done to allow the caller to split
the option and its optarg easily
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Reviewed-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Exclude files with hardlinks when cat'ing all the files, and do a second
run to look at each file with hardlinks, keep track of the ones we've
already operated on, and only cat each inode once. Then use "wc -c" to get
the size of all (deduplicated) files the same way we were already doing.
Original-patch-by: Ronan Pigott <rpigott@berkeley.edu>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
zipman:
read -r protects against those evil manpages whose filenames contain
backslash escapes, (muahahaha?)
IFS= read protects against filenames with:
- leading whitespace (but no one is actually stupid enough to configure
their MAN_DIRS=() in makepkg.conf with such silly directories, *right*?)
- trailing whitespace (but likewise, no one should be stupid enough to
write an uncompressed manpage for section '1 ' or something)
Also fix several other cases where we read filenames without protecting
against surrounding whitespace, or without using null-delimited
filenames when we could trivially do so.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2018 NEW=2019
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg now complains when PACKAGER is not in the format
"name <email>".
Hide this warning when PACKAGER is unset but still warn if it is set to
something out of format.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Not all compression types can be detected in the seccomp sandbox, so we
need to disable it. This requires either configuring makepkg to know the
sandbox is available, or checking for file >= 5.38 in which the sandbox
option is a no-op even when seccomp is disabled.
- Requires autoconf-archive for autotools version compare macro.
- meson version comparison could be made a lot simpler using meson-git.
Fixes FS#58626
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The rust language supports $RUSTFLAGS to be used automatically in all
rustc invocations. Allow setting this in makepkg.conf (e.g. for
optimization or debuginfo support), and teach debug+strip to pass the
rustc command line argument necessary to rewrite source file paths in
the debugging symbols.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman should be able to extract an email address from PACKAGER for WKD
lookup, so issue a warning if it is not of the form
"Example Name <email@address.invalid>". Neither the name nor the email
address must contain additional angle brackets.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
An artificial symbol can be produced when requesting debugging symbols
and the compiler has inlined a function. These symbols will give
spurious results when listing source files for inclusion in debug
packages. This will ignore these symbols and avoid an error that can be
generated when creating a debug package.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgname and pkgver are used as directory names within database files.
libarchive does not provide a reliable locale-independent method for
reading archive file names, causing errors when archive paths include
non-ascii characters.
This is a first step toward dealing with FS#49342, by hopefully reducing
the number of packages with non-ascii data in the wild before updating
libalpm to reject them outright.
See https://github.com/libarchive/libarchive/wiki/Filenames
and https://github.com/libarchive/libarchive/issues/587
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When scripting/automating around makepkg, it is sometimes desirable to
know how makepkg will be configured to operate. One example is the
archlinux devtools, which must forward select makepkg.conf variables
into a build chroot (for example PACKAGER) or use those variables itself
(for example {SRC,PKG,LOG}DEST).
The configuration file can be in up to 3 places, and should be capable
of being overridden via environment variables. It is sufficiently
complex to represent distinct functionality, and sufficiently useful to
merit easy accessibility in other scripts, therefore, let us move it
into a publicly exposed utility library.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These variables must begin with .src.tar / .pkg.tar respectively, so
fail early if those expectations are not matched. This prevents makepkg
from creating e.g. package files literally named "./pacman-5.1.3-1-x86_64"
which are actually uncompressed tarballs.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
file 5.37 changed the gzip MIME type from application/x-gzip to
application/gzip, so support this when checking to extract source files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When the executable checking was refactored into libmakepkg, it carried
with it, usage of $E_* error codes, which need to be declared from
error.sh but are only available when the parent program already sources
error.sh; additionally, message.sh was only loaded in a parent
library, but not where it was needed, and option.sh was often loaded
when it wasn't needed at all.
util.sh, meanwhile, has always depended on message.sh functions.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The right-hand side of the [[ ... = ... ]] keyword is an exception to
the general rule that quoting is unnecessary with [[
This is usually not a problem, e.g. in libmakepkg, lint_one_pkgname will
already fail if pkgname has an asterisk, but it certainly doesn't hurt
to be "more proper" and go with the spec; it is more dangerous in
repo-add, which can get caught in an infinite loop instead of safely
asserting there is no package named 'foo*'.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "tip" ref actually signifies the most recently updated branch. hg
does not support a default branch named anything other than "default",
except by creating a "@" bookmark. The correct way to explicitly update
to the default clone ref, is therefore to use one of these, rather than
"tip".
Fixes FS#62092
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
One of the callers was changed to use known_hash_algos, one was not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 1825bd6716c2a51c92642e8b96beac0101e83805 this was split out
from makepkg, but the warning was not properly migrated; $ext did not
ever exist.
As a result, no matter what you did, the only possible warning was:
==> WARNING: '' is not a valid archive extension.
Fix to filter based on the presence of .tar in the argument, and
building the $ext variable for all checking and messaging purposes
within the function.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to cache sources offline, makepkg creates *two* copies of every
git repo. This is a useful tradeoff for network time, but comes at the
cost of increased disk space.
Normally, git can smooth this over automagically. Whenever possible, git
objects are hardlinked to save space, but this does not work when
SRCDEST and BUILDDIR are on separate filesystems.
When the repo in question is both very large (linux.git for example is
2.2 GB) and crosses filesystem boundaries, this results in a lot of
extra disk space being used; the most likely scenario is where BUILDDIR
is a tmpfs for bonus ouch.
git(1) has a builtin feature which serves this case handily: the
--shared flag will create the info/alternates file instructing git to
not copy or hardlink or create objects/packs at all, but merely look for
them in an external location (that being the source of the clone).
The downside of using shared clones, is that if you modify and drop
commits from the original repo, or simply delete the whole repo
altogether, you break the copy. But we don't care about that here,
because
1) the BUILDDIR copy is meant to be a temporary copy strictly derived
via PKGBUILD syntax from the SRCDEST, and must be able to be
recreated at any time,
2) if the SRCDEST disappears, makepkg will redownload it, thus restoring
the objects needed by the BUILDDIR clone,
3) if the user does non-default things like hacking on the BUILDDIR copy
then deleting and re-cloning the SRCDEST may result in momentary
breakage, but ultimately should be fine -- the unique objects they
created will be stored in the BUILDDIR copy.
While it's theoretically possible that upstream will force-push to
overwrite the base tree from which makepkg is building (which they
should not do), *and* the user deleted their SRCDEST which they should
not do, *and* they saved work in makepkg's working directory which they
should not do either...
... this is an unlikely chain of events for which we should not care.
Using --shared is therefore helpful in immediately useful ways and IMHO
has no actual downsides; we should use it.
An alternative implementation would be to use worktrees. I've rejected
this since it is essentially the same as shared clones, except adding
additional restrictions on the branch namespace, and could potentially
break existing use cases such as manually handling the SRCDEST in order
to share repositories with normal working copies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
coreutils 8.26 in December 2016 added this new hashing method which is
compatible with the existing md5sum and sha*sum tool usage, while using
the blake2 hash algorithm.
makepkg uses coreutils to provide source file integrity checks via
${integ}sum binaries and it makes sense to offer this as an additional
option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We cannot use most of the arrays defined in schema.sh as srcinfo is dependent
on the order, but migrate the hashes for now.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them
raise an error.
This also disallows using 'any' as an architecture specific variable
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg will now error if disallowed variables are set inside of
the package function.
Disallowed variables are variables that do exist, like 'makedepends'
and 'pkgver' but can not be set inside of a package function.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New verification protocols can
then be added via thirdparty libmakepkg drop-ins without requiring
modifications to verify_signature.sh
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New source protocols can then be
added via thirdparty libmakepkg drop-ins without requiring modifications
to source.sh
Fixes FS#49076
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Making the undescore be translated is probably not something we need
translators to think about.
Additionally, a number of places which use the same text differ only by
the variable being referenced, so simplifying the string means we can
drop a redundant translation.
Bonus: we save a few bytes here and there. \o/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Error if the arch array contains any and any other values. This also
fixes a bug where the check for `$arch == 'any'` which only evaluated
the first value in the array, meaning the rest of the values would not
be linted.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit f7efa6a93d5361af610827d41045d87c7a72f2b5 we added a new file,
and also wired it up to the build systems, but it got added under the
wrong name in meson.build
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use mapfile instead of hacking around read -a with the $IFS.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This can only ever be an int, and the specification states that a
malformed timestamp should be considered a fatal error.
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If you have a malformed pkgrel, the error message says that it must be a
"decimal". That isn't quite true, as that would mean that `1.1 == 1.10`.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
opt)depends/provides/conflicts
Given the depends
depends=('foo>=1.2-1.par2')
and the error message
==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace.
One would be lead to believe that the problem is that they gave a pkgrel in
depends at all, not that the pkgrel contains letters.
Each of the (check,make,opt)depends, conflicts, and provides linters use a
glob to trim off properly formed epoch an rel from the full version string,
and pass the remainder to check_pkgver(). This does a good job of
accepting/rejecting full versions, but doesn't do a good job of generating
good error messages when rejecting if it's because of the epoch or rel.
1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and
lint_pkgrel(), similarly to check_pkgver().
2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and
splits it in to epoch/ver/rel, and calls the appropriate check_ function
on each.
3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and
provides linters.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checking the length of the variable to be non-zero before considering it
an error is inconsistent; license=() and depends='' and `declare arch`
should be considered just as wrong.
In fact the current check detects depends='' as non-zero and returns an
error, but happily considers the others to be perfectly okay.
A more reliable check is to simply see if the name has been declared
(whether it is set or not), and then enforce that it's been declared to
the right type.
As an added benefit, avoiding the creation of proxy-evaled variables to
count the number of indexes results in simpler code.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit d8ee8d0c99c3820951e2e49dbdb71a5390bd1dc4 we made use of
fakeroot absolutely mandatory, and disabled a lot of the code which
checked to see if this now-defunct BUILDENV option was set, before
setting up the environment to use fakeroot. Unfortunately, we missed one
spot.
The check_software routine still checked to see if fakeroot was
enabled, but due to the option being removed, thought that it was in
fact disabled, and as a result this check would never run.
Fix by checking to see if we are trying to build either a package or a
source package, and if so, checking for fakeroot. These are the only two
situations where fakeroot is needed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
directories are created by install_dir within the subdir custom_target
installation targets.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|