| Age | Commit message (Collapse) | Author |
|---|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New verification protocols can
then be added via thirdparty libmakepkg drop-ins without requiring
modifications to verify_signature.sh
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
This behavior is confusing, since it means absolutely everything goes to
stderr and makepkg itself is a quiet program that produces no expected
output???
The only situation where messages should go to stderr rather than
stdout, is with --geninteg which is meant to return the checksums on
stdout (but we don't want to totally get rid of status messages when
redirecting the results elsewhere, or, worse, redirect status messages
to a PKGBUILD). For this specific case, redirect message output to
stderr in the --geninteg callers directly.
Implements FS#17173
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function
was moved out of fakeroot, and thus out of the create_package loop. This
meant that if package signing failed, it was no longer possible to tell
which package it failed on by checking which package creation is
currently running. Successful signing attempts do not have this problem
as we already printed the name of the signature file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 9c8d7a80 broke the signing of debug packages by merging code up but
not changing the test condition.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checking the file extension to determine if something is a signature is
currently done in three places:
- verify_file_signature: uses $file to print status, reuses it for
comparison
- source_has_signatures: uses $netfile, but removes url component if
filename component exists
- generate_one_checksum: uses $netfile and fails to detect renamed files
This leads to inconsistent behavior when trying to use a signature of
the form "foo-1.0.tar.gz.asc::https://example.com/foo-1.0.tar.gz.pgp"
Fix this by treating the third case like the second case.
Reported-by: Giancarlo Razzolini <grazzolini@archlinux.org>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit c6b04c04653ba9933fe978829148312e412a9ea7 package signing was
moved out of fakeroot, and as part of this process, the global pkgname
variable was modified in order to extract the built package names.
However, if a debug package was not available and added to the list of
packages, the function was aborted early, before the pkgname array was
restored, thereby corrupting the later stages of makepkg and
specifically the install_package function which needs to know which
pkgnames to install.
Fix this by inlining the debug package signing inside the `if` check,
and as added security switch to using `for pkg in "${pkgname[@]}"` as is
done in many other parts of makepkg, since package signing does not
depend on the value of pkgname for anything.
Additionally, since debug packages may not actually exist, check if the
package file exists first.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Followup on c6b04c04653ba9933fe978829148312e412a9ea7 which refactored
the signing function to run outside of fakeroot, and in the process
moved the status message to outside the $SIGNPKG check.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In eaa82b4d0775252856a4e54a6f2a9ea191cf0b8f source_has_signature() was
modified to check if git repositories are marked as signed. However, due
to a typo the unused variable $netfile was checked. This worked as long
as the last source element was marked as signed, due to $netfile being
mistakenly set as a global in check_vcs_software(), but usually failed
with multiple sources.
Break this more consistently by properly declaring $netfile as a local
variable in check_vcs_software() which it should be regardless. Fix it
again by completely moving over to $netfile in source_has_signature()
as netfile is more descriptive of the current state.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In 42e7020281d3ae260e1e9693495f527b7f476625 creating the gpg statusfile
for a source file was split into a separate function, which used the
return code to indicate unsigned files and proto-specific errors.
However, the fallback return code was set by the final gpg invocation,
which would be 1 if the signature was somehow broken (for example, the
key was not available in the gpg keyring). As a result makepkg thought
that file did not have a signature and skipped over it rather than
erroring out.
Fix this by explicitly setting the return code for all
verify_*_signature() functions.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With recent version of gpg, signing within fakeroot works on the first
invocation, but fails on later runs. Sign all packages outside of fakeroot
to avoid this issue.
Fixes FS#49946.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A git repository is marked as signed if it contains the query "signed"
as defined by https://tools.ietf.org/html/rfc3986
Adds two utility functions in util/source.sh.in to extract fragments and
queries, and modifies source/git.sh.in to use them.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This makes it easier to add signature verification for new protos.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If pacman is build against a crypto library other than openssl, it makes no
sense to require makepkg to use it.
The only currently considered alternative to openssl is nettle, which has no
binary for base64 encode/decode. This means that we could replace the hashing
cacluations with nettle-hash, but would require base64 from coreutils.
Given makepkg already relies heavily on coreutils, we might as well use all
the coreutils hashing binaries too.
This patch also improves the checking of required binaries for hashing
operations.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
Signed-off-by: Allan McRae <allan@archlinux.org>
|