| Age | Commit message (Collapse) | Author |
|---|
|
Currently pacman relies on the SKS keyserver network to fetch unknown
PGP keys. These keyservers are vulnerable to signature spamming attacks,
potentionally making it impossible to import the required keys. An
alternative to keyservers is a so-called Web Key Directory (WKD), a
well-known, trusted location on a server from where the keys can be
fetched.
This commit adds the ability to retrieve keys from a WKD. Due to the
mentioned vulnerabilities, the WKD is tried first, falling back to the
keyservers only if no appropriate key is found there.
In contrast to keyservers, keys in a WKD are not looked up using their
fingerprint, but by email address. Since the email address of the
signing key is usually not included in the signature, we will use the
packager email address to perform the lookup.
Also see FS#63171.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Ask the user whether they want to import a missing key before even doing
a search on the keyserver. This will be useful for getting Web Key
Directory support in place: for a WKD, looking up and importing a key
are a single action, so the current key_search -> QUESTION -> key_import
workflow does not apply.
Since only the ID of the package signing key is available before
key_search, we display the packager variable in addition to the key ID
for user convenience.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Downloads with a Content-Disposition header will typically not include
slashes. When they do, we should most certainly only take the basename,
but when they don't, we should treat the header value as the filename.
Crash introduced in d197d8ab82cf when we started using get_filename
in order to rightfully avoid an arbitrary file overwrite vulnerability.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently when caling alpm_trans_commit, if fetching a package restults
in a 404 (or other non 400 response code), the function returns -1 but
errno is never set.
This patch sets errno to ALPM_ERR_RETRIEVE.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
%X is locale-dependent, making it impossible to reliably parse and
potentially overflowing the buffer. %T is consistent across locales.
Also fixes some adjacent whitespace.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Credit to Andrew for identifying source of the leak.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Make it clearer that the targets are matched against both directories
and regular files and free up File to potentially refer specifically to
regular files in the future. File is retained as a deprecated alias for
Path for the time being to avoid breaking existing hooks and will be
removed in a future release.
See FS#53136.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Clang 8 warns that adding a string to an integer does not append to
string. Indeed it doesn't, but that was not the intentetion. Use array
indexing as suggested by the compiler to silence the warning. There
should be no functional change.
Example of warning message:
alpm.c:71:54: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
sprintf(hookdir, "%s%s", myhandle->root, SYSHOOKDIR + 1);
~~~~~~~~~~~^~~
alpm.c:71:54: note: use array indexing to silence this warning
sprintf(hookdir, "%s%s", myhandle->root, SYSHOOKDIR + 1);
^
& [ ]
1 warning generated.
|
|
gpgme in git master now supports pkg-config and with the next release we
can and should prefer its use. However, retain the legacy code that
enables building with older versions of gpgme, as a fallback.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The time logged is currently given as localtime without any timezone
information. This is confusing in various scenarios.
Examples:
* If one is travelling across time-zones and the timestamps in the log
appear out of order.
* Comparing dates with `datediff` gives an offset by the time-zone
This patch would reformat the time-stamp to a full ISO-8601 version.
It includes the 'T' separating date and time including seconds.
Old: [2019-03-04 16:15]
New: [2019-03-04T16:15:45-05:00]
Signed-off-by: Florian Wehner <florian@whnr.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When installing a remote package with "pacman -U <url>", pacman renames
the downloaded package file to match the name given in the
Content-Disposition header. However, pacman does not sanitize this name,
which may contain slashes, before calling rename(). A malicious server (or
a network MitM if downloading over HTTP) can send a content-disposition
header to make pacman place the file anywhere in the filesystem,
potentially leading to arbitrary root code execution. Notably, this
bypasses pacman's package signature checking.
For example, a malicious package-hosting server (or a network
man-in-the-middle, if downloading over HTTP) could serve the following
header:
Content-Disposition: filename=../../../../../../usr/share/libalpm/hooks/evil.hook
and pacman would move the downloaded file to
/usr/share/libalpm/hooks/evil.hook. This invocation of "pacman -U" would
later fail, unable to find the downloaded package in the cache directory,
but the hook file would remain in place. The commands in the malicious
hook would then be run (as root) the next time any package is installed.
Discovered-by: Adam Suhl <asuhl@mit.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a mirror responds with a 301 redirect to itself, it will create an
infinite redirect loop. This will cause pacman to hang, unresponsive to
even a SIGINT. The result is pacman being unable to sync or
download any package from a particular repo if its current mirror
is stuck in a redirect loop. Setting libcurl's MAXREDIRS option
effectively prevents a redirect loop from hanging the process.
Signed-off-by: Mark Ulrich <mark.ulrich.86@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The behaviour of "pacman -Qu" was very strange... It would only consider
packages from repos with Usage = Search (or All), and ignore those with
Usage = Sync, Install or Upgrade.
This is because the function alpm_sync_newversion() used ALPM_DB_USAGE_SEARCH
for its filtering. Given this function is documented (at least in the source)
to "Check for new version of pkg in sync repos", I would expect that to look at
all repos. However, just changing this parameter, would result in a fairly
silent change in behaviour of this function. Instead, rename the function
and remove this filtering altogether. Users of this function can filter
the dbs passed to this function to achieve their desired output.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The alignment was not overly helpful and caused unnecessary churn when a new
value with longer name was added.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 0994893b0e6b627d45a63884ac01af7d0967eff2 added the
alpm_pkg_get_{make,check}depends functions but forgot to include
logic for parsing these fields from the database. As a result these
functions will always return an empty list.
This commit adds the parsing logic.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
While at it and for consistency move the assignment of the variable
'local' into the subsequent conditional.
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
sync:
As pointed out by Andrew Gregory there could be an error when adding
duplicates if they are two separate packages with the same name. Add a
check in alpm_add_pkg() to test whether the duplicate is actually the
same package, and if so, log a debug message and return success to skip
the package. If the duplicate is a different package return
ALPM_ERR_TRANS_DUP_TARGET and treat that error just like any other error
in pacman.
remove:
Change alpm_remove_pkg() to just log a debug message and return success
to skip duplicates. Remove the handling of ALPM_ERR_TRANS_DUP_TARGET in
pacman.
Also fixes FS#49377.
Suggested-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 2ee7a8d89ad693617307260604e1d58757fd2978 replaced a manual check
for a local package with a check for the "oldpkg" member, which gets set
at the beginning of the transaction. If the package was also in the
remove list, such as when a package gets replaced, it would no longer be
in the local db and pacman would try to remove it twice, resulting in
superfluous error messages.
Fixes: FS#50875, FS#55534
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
ALPM_SIG_USE_DEFAULT does not refer to an actual siglevel, rather it
indicates that the global default should be used in place of the
operation-specific one. Setting this value for the global default
itself makes no sense.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
An empty siglevel does not do any signature verification which is
exactly what we want when compiled without gpg support. This is already
allowed in other parts of the codebase and required for the test suite
to pass when compiled without gpg support.
Fixes: FS#60880
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
"wrong or NULL argument passed" is a useless error for end users.
Fixes FS#60880.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
If poll() is interrupted by a signal, alpm was closing the socket it
uses for listening to script/hook output. This would drop script output
at the least and kill the script at the worst.
Fixes FS#60396
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Front-ends or libraries may set signals to be ignored, which gets
inherited across fork and exec. This can cause scripts to malfunction
if they expect the signal. To make matters worse, scripts written in
bash can't reset signals that were ignored when bash was started.
Fixes FS#56756
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When --needed is used, up to date packages are now filtered out
before showing the group select.
Fixes FS#22870.
Signed-off-by: morganamilo <morganamilo@gmail.com>
|
|
Upon receiving SIGINT a flag is set to abort the (curl) download.
However, since it was never reset/initialized, if a front-end doesn't
actually exit on SIGINT, and later tries any operation that needs to
perform a new download, said download would always get aborted right
away due to the flag not having been reset.
|
|
Variable dload_interrupted is used both to abort a download because
SIGINT was caught, and when a file limit is reached. But raising SIGINT
is only meant to happen in the first case.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
|
|
Currently, if checking the validity of packages fails due to an access
error on one or more packages, the user must sift through debug output
in order to find the culprit package(s). This patch adds a call to
_alpm_log in such a case to make the culprits more easily visible.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add a case for curl error 'Could not resolve host'.
An attempt to fix FS#48285.
Signed-off-by: Michael Straube <straubem@gmx.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It is desirable to have 'a-post.hook' ordered after 'a.hook'. For this,
it is needed to ignore the suffix when sorting.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The pacman --overwrite operation currently expects a path without
the root prefix specified. This is unexpected, particularly
given our conflict error message reports the path with the root
prefix included.
This patch allows libalpm to overwrite files with the root prefix
specified.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The filename in the license header did not match the actual filename
as in the other files. Hopefully this is not too nit-picky.
Signed-off-by: Michael Straube <straubem@gmx.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Also remove any translations that are less than 75% complete. These will
be readded once translation completion passes our minimum threshold.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Many of these are pointless (e.g. there is no need to explicitly turn on
spellchecking and language dictionaries for the manpages by default).
The only useful modelines are the ones enforcing the project coding
standards for indentation style (and "maybe" filetype/syntax, but
everything except the asciidoc manpages and makepkg.conf is already
autodetected), and indent style can be applied more easily with
.editorconfig
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Attempting to compile pacman with gcc8 results in several warnings like:
remove.c: In function ‘unlink_file.isra.4’:
remove.c:407:34: warning: ‘.pacsave.’ directive output may be truncated writing 9 bytes into a region of size between 1 and 4096 [-Wformat-truncation=]
Fix by adding checks to error out if snprintf tries to reserve a
truncated filename. Because the return values are checked, gcc delegates
the truncation response to our code instead of throwing warnings.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add all files to the relevant POTFILES.in. This avoids missing
translations added to old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkg-config has built-in dependency handling, but we currently insert the
raw $LIBS into libalpm's own linker flags and fail to handle Cflags at
all.
For dependencies which support pkg-config, simply use that instead.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|