| Age | Commit message (Collapse) | Author |
|---|
|
This is always true at the end since we return early if we couldn't
create the tmpdir, so it is totally unnecessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We shouldn't be going through the accessor that does a bunch of
unnecessary legwork, including potentially loading the pkgcache right
before we free it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rather than using a string-based path, we can restore the working
directory via a file descriptor and use of fchdir().
From the getcwd manpage:
Opening the current directory (".") and calling fchdir(2) to
return is usually a faster and more reliable alternative when
sufficiently many file descriptors are available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We did a lot of both malloc-ing and stack printing to form some paths in
this code. Attempt to unify it all into the one get_pkgpath() method by
adding an optional third "filename" parameter, and form the necessary
path string all in one go.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
1. Don't run it if something failed in package removal- this mirrors
what we already do in sync transactions.
2. Don't run it if we are invoking it for the replaces removal bit of a
sync transaction- it doesn't make sense to run ldconfig halfway through
a sync install; we should only run it once at the end.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We add them to this list with the root path not appended; we should be
searching for them this way as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We checked the (fgets == NULL and !feof) case, but never actually bailed
out of the loop if we were at the end of the file, causing infinite
looping.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This shouldn't really be declared with const, and causes a compile error
when -Wcast-qual is used. Remove the const specifier from the function
specification and all implementations.
Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We never ended up using or really needing this; kill it for now knowing
it is in git history if ever needed again.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This function doesn't exist on OSX. Since there aren't any other
candidates in alpm for which this function would make sense to use,
simply replace the function call with a loop that does the equivalent.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Similar to an earlier commit which accounts for .part files for full
packages, calculate the download_size for deltas keeping mind the
possibility of a partial transfer.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Check for the existance of a partial download of a package file before
jumping to delta calculations. Currently, if there were 10MiB remaining
in a 100MiB the values passed to the front end do not reflect this.
Refactored from an old patch originally by Dan.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
if ~/.netrc exists and has credentials for the hostname requested in a
download, they will be provided in an http auth request. This can still
be overridden by explcitly declaring user:pass in the URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adjusts type usage to match POSIX provided types from
<sys/types.h> rather than assuming everything will fit in a long or
unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as
appropriate. These are affected the same way off_t is on 32 bit
platforms, where the types are extende to 64 bits if large file support
is enabled.
Because most numbers here are block counts, this isn't
near as pressing as using a 32-bit variable for file sizes where
anything over 2GiB can burn you; we likely can support files at least
512 but mainly 4096 times larger.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Changes in commit dc3336c277 caused this to stop working as expected for
sync packages, due to the way the logic is structured. Ensure we always
enter the signature code if the bitflag is flipped on to check
signatures for packages. Rename 'use_sig' to 'has_sig' for clarity.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This works for both 32-bit and 64-bit platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gives us some amount of room to grow in case we ever find another
reason that we might return with an error from the progress callback.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We lost some of this output in the fetch->curl conversion, but I also
noticed in FS#25852 that we just lack some of this useful information
along the way.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
_alpm_filecache_setup() destroys the list of cachedirs when it finds no
writeable directories in the config. This put us in an awkward situation
where _alpm_filecache_find() would locate a downloaded file in a r/o
cachedir, but then fail to install it after _alpm_filecache_setup() is
called (with a NULL argument). Change this behavior to merely prepend
the temporary directory to the list of available cachedirs.
Dan exposed it in e07547ee4ed4, as now a package can be found in a
directory we may not be able to actually store packages in.
Reported-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Neither deltas nor filename attributes are ever present in the local
database, so we can remove all of the indirection for accessing these
attributes.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The call to apply was tucked inside validate, and the EVENT callbacks
were done outside the function rather than inside. Reorganize things a
bit to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We currently have csize, isize, and size concepts, and sometimes the
difference isn't clear. Ensure the following holds:
* size (aka csize): always the compressed size of the package; available
for everything except local packages (where it will return 0)
* isize: always the installed size of the package; available for all
three package types
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This upgrades the simple 15/17 scaling by package number we used before
to package sized based scaling, which is much more accurate. Addresses
some of the issues raised in FS#25817.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using atol(), which on 32 bit, cannot handle values greater than
2GiB, which is fail.
Switch to a strtoull() wrapper function tailored toward parsing off_t
values. This allows parsing of very large positive integer values. off_t
is a signed type, but in our usages, we never parse or have a need for
negative values, so the function will return -1 on error.
Before:
$ pacman -Si flightgear-data | grep Size
Download Size : 2097152.00 K
Installed Size : 2097152.00 K
After:
$ ./src/pacman/pacman -Si flightgear-data | grep Size
Download Size : 2312592.52 KiB
Installed Size : 5402896.00 KiB
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Helder Martins <heldermartins89@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reduces from 5 to 3 the number of searches needed on the string
looking for a comparison operator, since we can so a second quick
comparison looking for '=' if we find '<' or '>'. It also makes every
search doable with strchr() or memchr() rather than the slower strstr()
method.
In testing, only 10% of splitdep calls (~1600 / 16000) during an -Ss
database load found a version comparison operator, so optimizing the not
found path to be require less work makes sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we fell through to the ALPM_DEP_MOD_ANY case, ptr would be NULL, and
we would pass (0 - <str>), which is a rather large negative number or
bogus positive number, depending on signed/unsigned. Just use strdup in
the case where we don't have a ptr available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Hard to believe there was still more room to improve on this, but I
found an easily correctable oversight tonight. Our databases (both sync
and local) contain many blank lines, and we were not moving onto the
next line right away in these cases; instead we would proceed through
our strcmp() conditional checks as normal.
Some local numbers follow to show the effects of this patch:
Sync `-Ss foobarbaz`:
71,709 blank lines skipped early
~1,505,889 strcmp() calls avoided (21 per line)
~15% speed improvement (.210 --> .179 sec)
Local `-Qs foobarbaz`:
6,823 blank lines skipped early
115,991 strcmp() calls avoided (17 per line)
~6% speed improvement (.080 -> .071 sec)
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add new alpm_pkg_get_origin() method, use it in the front end now that
the enum constants are publicly available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used
by frontends.
Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from
as was in src/pacman/package.h)
Updated API change in README.
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There are many other ways to fail a package load other than "file not
found". We should also use the correct error code in this case. Clean it
up a bit in the various callers.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Just pass the entire sync package in if we have it; that way we can do
any necessary operations involving it rather than have a parameter list
growing endlessly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I was trying to take a shortcut and not introduce a wrapper struct for
the signature results, so packed it all into alpm_sigresult_t in the
first iteration. However, this is painful when one wants to add new
fields or only return information regarding a single signature.
Refactor the type into a few components which are exposed to the end
user, and will allow a lot more future flexibility. This also exposes
more information regarding the key to the frontend than was previously
available.
The "private" void *data pointer is used by the library to store the
actual key object returned by gpgme; it is typed this way so the
frontend has no expectations of what is there, and so we don't have any
hard gpgme requirement in our public API.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Free "md5sum" if md5_file() fails in alpm_compute_md5sum(). Free
"sha256sum" if sha2_file() fails in alpm_compute_sha256sum().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Do all the checks at once; this also avoids the 'return' call after we
have allocated memory for "pkgpath" as well as tweaked the umask.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Free "syncpath" and restore umask if we fail to grab a lock.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
After commit 2e7d0023150664, we use off_t rather than long variables.
Use the _LARGE variants of the methods to indicate we are passing off_t
sized variables, and cast using (curl_off_t) accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Don't force 'never'; you should be checking both the status and validity
anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There were many cases where the string coming in was a blank line, e.g.
"\n\0", length 1. The trim routine starts by trimming leading spaces,
thus trimming everything. We would then proceed to do a memmove of the
NULL byte, which is completely worthless as we can just assign it
instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|