Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/lib/libalpm
AgeCommit message (Collapse)Author
2012-04-07Updates from TransifexDan McGee
This encompasses a few languages that have had changes since 4.0.2 available on Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-28Update all translation filesDan McGee
Pull updates from transifex, run update-po on all files, fix a few errors, and push them back to Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-28signing: cope with gpg2's failure at lifeDave Reisner
For key searches only, gpg2 will fail to lookup any and all keys that are not prefixed with 0x. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/sync.c
2012-03-16Prefer fputs/fputc over fprintf when writing local databaseDan McGee
Using fputs should be faster as no format string parsing is required. It also prevents silly errors related to unescaped '%' signs, and removes the need to double them up in a lot of places. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Extract a write_deps function from local database writingDan McGee
This reduces a lot of code duplication in the write function, which cleans it up a bit. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Remove unnecessary path check from local databaseDan McGee
This removes a call to _alpm_local_db_pkgpath() as well as an access() call when reading the local database. This appears to be code from 2006 that has stuck around. We don't need it because: 1) We never use this path except to check it via access(); however, we are already in a readdir() loop so it exists, or at least did at the time of the call. 2) The fopen() and other calls will fail on accessing the database files anyway, and we need to check those for errors. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-14lib/sync: avoid unwanted unlink after download failDave Reisner
In case we have a mirror failure, unlink_on_fail would remain set, causing an interrupt in a successive download attempt to be wrongly unlinked. This also fixes a memory leak in the url member, as we would allocate over the previous, unfreed URL. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-03-14dload: reset payload filename members before downloadDave Reisner
To avoid conflicts on reusing a payload after a failed download, ensure that we reset the filename hints in the payload struct prior to the download operation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-12Minor format-string related cleanupsDan McGee
We had one stubbed out so we didn't require a translation update, and the other is more a code style issue. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/be_package.c
2012-03-08Simplify package validation info output for sync packagesAllan McRae
Unify the output for local and sync packages by only printing a list of possible validation types for sync packages. This also has the advantage of not printing the very long sha256 checksum which line wrapped on a standard width terminal. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-03-08Remove _alpm_csumAllan McRae
The enum alpm_pkgvalidation_t is essentially a more generic version of _alpm_csum, so use it instead. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-03-08Add information on how an installed package was validatedAllan McRae
When installing a package, store information on which validation method was used and output this on "pacman -Qi" operations. e.g. Validated By : SHA256 Sum Possible values are Unknown, None, MD5 Sum, SHA256 Sum, Signature. Dan: just a few very minor tweaks. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08Hook new optdepend structures upBenedikt Morbach
No new behaviour introduced, everything should work exactly as before. Dan: refactored to use the single alpm_depend_t structure. Signed-off-by: Benedikt Morbach <benedikt.morbach@googlemail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08Allow alpm_depend_t to have a descriptionDan McGee
This is the first step in parsing and handling optdepends. There is no behavior change introduced in this commit; however, depends that contain a ": " string will now be parsed as having a description and it will be stored in the depend structure. Later patches will utilize this new field as appropriate. This is heavily based on the work of Benedikt, who did something similar but introduced a new type for this rather than only a new field to the existing type. Heavily-influenced-by: Benedikt Morbach <benedikt.morbach@googlemail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-05Translation updates from TransifexDan McGee
* it updates to all translations * minor fr, pt_BR, de, lt, sk and uk updates * add new strings in pacman translation catalog Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-05Fix a potential memory leak in filelist creationDan McGee
If we begin to create a file list when loading a package, but abort because of an error to one of our goto labels, the memory used to create the file list will leak. This is because we use a set of local variables to hold the data, and thus _alpm_pkg_free() cannot clean up for us. Use the file list struct on the package object as much as possible to keep state when building the file list, thus allowing _alpm_pkg_free() to clean up any partially built data. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-05Fix a memory leak when loading an invalid packageDan McGee
This is easily triggered via a `pacman -Sc` operation when it attempts to open a delta file as a package- we end up leaking loads of memory due to us never freeing the archive object. When you have upwards of 1200 delta files in your sync database directory, this results in a memory leak of nearly 1.5 MiB. Also fix another memory leak noticed at the same time- we need to call the internal _alpm_pkg_free() function, as without the origin data being set the public free function will do nothing. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Use "mode" in _alpm_makepath_modeAllan McRae
It seems that if we pass the permissions that we want the created directory to have, then we should probably use it... Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Merge branch 'maint'Dan McGee
Conflicts: contrib/pacsysclean.in src/pacman/conf.h
2012-02-20Update copyright yearsAllan McRae
Add 2012 to the copyright range for all libalpm and pacman source files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20util: reduce pointer hell in _alpm_makepath_modeDave Reisner
Simplify the implementation: - allocate and manipulate a copy of the passed in path rather than building out a path as the while loop progresses - use simple pointer arithmetic to skip uninteresting cases - use mkdir(3)'s return value and errno to detect failure Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Print error message when to-be-downloaded file cannot be createdNagy Gabor
It can happen that the to-be-downloaded file cannot be created in cachedir. For example, I am an -Sup user, and it is comfortable to set --cachedir to /mnt/pendrive, which is a FAT filesystem, so files like capseo-1:0.3-2-i686.pkg.tar.xz cannot be downloaded to there. Before this patch, pacman didn't give clear output about what happens when the download code could not create the necessary file. This can be confusing with -Su. An example output: *** $ sudo pacman -S capseo bochs --cachedir /c/TEMP resolving dependencies... looking for inter-conflicts... Targets (2): bochs-2.4.6-1 capseo-1:0.3-2 Total Download Size: 0.61 MiB Total Installed Size: 2.61 MiB Proceed with installation? [Y/n] :: Retrieving packages from extra... warning: failed to retrieve some files from extra bochs-2.4.6-1-i686 611.5 KiB 118K/s 00:05 [------------------] 97% error: failed to commit transaction (unexpected error) Errors occurred, no packages were upgraded. *** After the patch, pacman will give more informative error message (and pm_errno is set properly): *** error: could not open file '/c/TEMP/capseo-1:0.3-2-i686.pkg.tar.xz.part': Invalid argument error: failed to commit transaction (failed to retrieve some files) *** Unfortunately, the "could not open file" error message is printed for every mirror (that can be dozens of lines), which is ugly, but at least informative... Without modifying the download logic (for example, by introducing -2 return value for _alpm_download() to indicate giving up), this ugliness cannot be eliminated. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Don't check diskspace when using --dbonlyDan McGee
Mostly a waste of time. Sure, we no longer make sure your pacman database partition has enough space, but if you are using this option you better know what you are doing anyway. Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit ee969006056c86e88d5f179a7575d64f23d5b252)
2012-02-19diskspace: ensure we match only full path componentsDan McGee
If one had a mountpoint at '/e' (don't ask), a file being installed to '/etc' would map to it incorrectly. Ensure we do more than just prefix matching on paths by doing some more sanity checks once the simple strncmp() call succeeds. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-15Revert "Add -S --recursive operation"Dan McGee
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with making other necessary changes to fully back this (mis)feature out until we can do it correctly. The quick summary here is this was not implemented correctly; provides are not fully taken into account in this logic, and making that happen exposes a lot of other flaws in this code that are covered up later on in the dependency resolving process by several other pieces of convoluted and conditional logic. Tests have been adjusted accordingly. Some test EXISTS conditions have been removed as we already know the package is installed locally, and we also are checking the VERSION condition anyway. With these two related revert commits, we do have some changes in test pass/fail results: * upgrade078.py: does not pass, this is due to --recursive getting removed for -U/-S operations after this commit. * sync302.py: the version checks have been disabled, so this test continues to pass but has been scaled back in scope. * sync303.py: now passes, was failing before. * sync304.py: still failing, was failing before. * sync305.py: now passes, was failing before. * sync306.py: still passes, was passing before. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-14Update SIGPIPE signal handler commentDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/sync.c src/util/pactree.c
2012-02-13Reset errno before opening archiveAllan McRae
Set errno to 0 at the start of _alpm_open_archive as it is not set when archive_read_open_fd fails. This can result in _alpm_pkg_load_internal thinking errno == ENOENT and setting the wrong pm_errno. e.g. Before: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot find the given file. After: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot open the given file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Allow specifying shell for running scriptletsAllan McRae
Some distributions insist on using bash specific commands in their install scripts under the assumption that "sh" is a symlink to bash. This can causes issues if (e.g.) their users what to change sh to point at another shell, such as dash, that does not support these features. Add a configure option to explicitly set the shell being used to run install scripts. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13use _alpm_access in a few more places for increased debugging infoFlorian Pritz
pacman -U <pkg> returns a bogus "could not find or read package" if the file is on a fuse file system that doesn't allow root access. Debug output isn't very helpful here either so we should log why the access check failed. The other 2 checks already log something when failing so logging a more specific error won't hurt either. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13lib/sync: use full delta size as max download sizeDave Reisner
The max filesize for a delta download must be the full size of the delta file, not just what's remaining. Fixes FS#28345 Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Fix a handful of comment typos or misspellingsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Translation updates from Transifex, mostly scriptsDan McGee
This is after some manual massaging to fix issues with newlines in some translations of the script catalogs. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/alpm_list.c
2012-02-06ALPM API adjustments for sanity and consistencyDan McGee
This makes several small adjustments to our exposed method names, and in one case, parameters. The justification here is to make methods less odd in their naming convention. If a method takes an alpm_db_t argument, the method should be named 'alpm_db_*', but perhaps more importantly, if it doesn't take a database as the first parameter, it should not. Summary of changes: alpm_db_register_sync -> alpm_register_syncdb alpm_db_unregister_all -> alpm_unregister_all_syncdbs alpm_option_get_localdb -> aplpm_get_localdb alpm_option_get_syncdbs -> aplpm_get_syncdbs alpm_db_readgroup -> alpm_db_get_group alpm_db_set_pkgreason -> alpm_pkg_set_reason All methods keep the same argument list except for alpm_pkg_set_reason; there we drop the 'handle' argument as it can be retrieved from the passed in package object. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06alpm.h: enum cleanups, comment formatting cleanupDan McGee
Don't use trailing commas in enums if people really want to use a strict C89 compiler, and document why on earth one particular enum uses bitmask values when it doesn't seem necessary. With comments, shoot for more consistency. When something is a one-liner, keep it that way and move the whole /** sequence */ to one line. When it needs more than one line, ensure we format most of them in a similar fashion. Two minor function signature adjustments are made that don't change anything other than matching the parameter name (name -> filename) and fitting in with our coding style (type* var -> type *var). Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Remove last explicit include of config.hDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Update translations from TransifexDan McGee
The pacman-scripts catalog is omitted here due to various newline errors I don't have the time to fix right now. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31Fix rare segfault on package removalAllan McRae
Very rarely a segfault would occur when removing a number of packages due to a corrupted list for the local database (FS#27805, FS#28195). This was caused by the alpm_list_msort function not correctly dealing with the two new head node's prev values. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Merge branch 'maint'Dan McGee
Conflicts: scripts/makepkg.sh.in
2012-01-30Update translationsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Remove rmrf implementation from backendDan McGee
This moves the code for removal of local database entries right into be_local.c, which was the last user of the rmrf() function we had in our utility source file. We can simplify the implementation and make it non-recursive as we know the structure of the local database entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23libalpm/deps.c: access trans flags directlyDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/diskspace.c src/pacman/util.h
2012-01-23lib/dload: give uniform naming to curl CB functionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Fix sys/mnttab.h header includeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23lib/dload: enforce usage of TCP keepalivesDave Reisner
This is particularly important in the case of FTP control connections, which may be closed by rogue NAT/firewall devices detecting idle connections on larger transfers which may take 5-10+ minutes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19Add diskspace checking support for Solaris/IllumosDan McGee
Was able to get my hands on one of these boxes today, so add yet another new way of doing this. I'm glad these calls are so standardized. This was compile tested on Linux and Illumos and seems to still be working in both places. Signed-off-by: Dan McGee <dan@archlinux.org>