| Age | Commit message (Collapse) | Author |
|---|
|
It wasn't even implemented correctly, and it really doesn't have a use if
packagers just do their job correctly anyway for a distro. Let's not try to
solve a problem with the wrong solution now.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
By attempting to stat the cachedir when we load the pacman config, pacman
bails out if it is a non-existant directory, even if it will never be
needed. This is unfortunate as it is only used for sync transactions anyway.
Instead, wait until we need it in _alpm_filecache_setup to actually do
anything.
Reported as FS#9096.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#7428. Added functions to remove cachedir, noupgrade, noextract,
ignorepkg, holdpkg and ignoregrp.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix whitespace]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Run the kernel's cleanfile script on all of our source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will be used in the next commit.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Don't open a stream to the logfile until necessary. This will allow us
to catch any errors in opening the logfile instead of ignorning them.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of declaring the extern variable in every *.c file, include it in
the header file that makes sense. This means handle.h for the handle, and
conf.h for the pacman side config object.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
BSD didn't support the NULL second argument GNU extension, so do it the
old fashioned way.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These macros take the place of the common 4 or 5 line blocks of code we had
in most places that called malloc or calloc. This should reduce some code
duplication and make memory allocation more standard in libalpm.
Highlights:
* Note that the MALLOC macro actually uses calloc, this is just for safety
so that memory is initialized to 0. This can be easily changed in one
place.
* One malloc call was completely eliminated- it made more sense to do it
on the stack.
* The use of RET_ERR in public functions (mainly the alpm_*_new functions)
was standardized, this makes sense so pm_errno is set.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When calling a function of the alpm_option_get_* group, you get a segfault
if you don't call alpm_initialize() first. With this patch those functions
set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle ==
NULL.
(Dan: modified to meet pacman coding standards)
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
A bunch of changes related to my first "real" install of pacman-git into
/usr/local and trying to use it.
* Shift some uses of free -> FREE in libalpm.
* Move stat and sanity checks of config paths into libalpm from the
config and argument parsing in pacman.c.
* Fix issue where dbpath still was not defined early enough due to its
requirement for being used in alpm_db_register. This should be rewritten
so it doesn't have this dependency, but this will work for now.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
snprintf takes a length including the '\0' character, this wasn't accounted
for originally. Fix it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add some comments in handle.h, and remove the pmaccess_t part that we
don't even use.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should hopefully allow multiple cache dirs to be specified in
pacman.conf and/or on the command line, and allow pacman to test
each one for the package file. The first one found to be writeable is
used as the download cache.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Switch over to the new frontend parseconfig.
* Fix a few issues in parseconfig
* Remove unused callback upon database registration
* Remove conf file related errors from error.c/alpm.h
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Warning: this compiles but may not work as intended quite yet. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove any use of the former path variables defined by the Makefiles or
config.h. These are now runtime configurable only with pacman.conf (or by
using flags on the command line).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove an unnecessary macro, and get rid of the void pointer.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
the alpm strcmp operation which takes void* references.
* We had this great visibility patch, but never actually took advantage of
it. Added the right compile flag to make it work and added some more
SYMEXPORTs where necessary to have a successful compile.
|
|
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
|
|
* Added some {}
|
|
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
|
|
occasions where some alpm stuff could be used without initializing the
library (vercmp is one). TODO make these functions (handle accessors)
better by returning "library not initialized" instead of failing.
* Removed NoUpgrade lines from pacman.conf - we need to test this!
* Re-corrected the lib targets for src/util/*
* make dist seems to have updated the po files
|
|
properly
* Error when re-reading the DB for replacements, wrong info level
* Removed an duplicate debug message "checking for package replacements"
* Check ignorepkg for REAL upgrades...
* Properly check the NOSAVE flag
* some unlink_file (remove.c) cleanup
* fix indent level on handle.c
* Force libalpm paths to end with a '/' char
* Fixed 'target' looping in conflict.c (pmsyncpkg_t, not pmpkg_t)
* Added some debug output to cache and db scanning
** All pactest tests succeed again, yay **
|
|
* Removed the handle->needles param. It's not needed not that alpm_list_t is
public
|
|
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
|
|
* ALPM_LOG_FUNCTION macro and all the great work to add this macro everywhere
|
|
* gcc visiblity changes
Also modified _alpm_versioncmp -> alpm_versioncmp (public function) as per K.
Piche's suggestions
|
|
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
|
|
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
|
|
* Removed some unnecessary headers and library links
* Made things static if possible
* Cleaned up makefiles a bit
* Fixed some old comments in the code
* Fixed some errors the static code checker splint pointed out
* Backwards arguments in a memset call in _alpm_db_read (could have been worse)
* Other various small fixes
Other:
* Default to 80 columns when getcols cannot determine display width
* Removal of ._install as a valid install file in packages
|
|
|
|
(no PKGBUILD)
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
|
|
* Furthered the "lazy caching" to force the pkgcache to read nothing
(INFRQ_NONE) by default. Anything requiring package data should now check
the infolevel of each package and attempt to update it. This could be
ironed out a bit more later (by using the front-end get_info function
* Switched to libfetch. Drastic changes to the download code and the callback
progress bar functions. Also fixed the return value of
_alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and
files urls, along with 'mtime's and numerous other fancy features from
libfetch.
|
|
reuse.
|
|
handling changes (support [sections] to carry over to included files - this
helps with backwards compatibility with existing pacman config files)
|
|
|
|
|