Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/lib/libalpm/dload.c
AgeCommit message (Collapse)Author
2016-12-05Parametrise the different ways in which the payload is resetMartin Kühne
In FS#43434, Downloads which fail and are restarted on a different server will resume and may display a negative download speed. The payload's progress in libalpm was not properly reset which ultimately caused terminal noise because the line width calculation assumes positive download speeds. This patch fixes the incomplete reset of the payload by mimicing what be_sync.c:alpm_db_update() does over in sync.c:download_single_file(). The new dload.c:_alpm_dload_payload_reset_for_retry() extends beyond the current behavior by updating initial_size and prevprogress for this case. This makes pacman reset the progress properly in the next invocation of the callback and display positive download speeds. Fixes FS#43434. Signed-off-by: Martin Kühne <mysatyre@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-12-05dload: use curl's keepalive mechanismDave Reisner
This does exactly the same thing as it code it replaces, but punt to curl to do it for brevity. Requires curl 7.25.0, which we already cover. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22Add ALPM_ERR_OK to _alpm_errno_tIvy Foster
This allows functions which return an _alpm_errno_t to always return a genuine _alpm_errno_t for consistency, even in cases where there are no errors. Since ALPM_ERR_OK = 0, their callers can still simply check 'err = some_fn(); if (!err) { ... }'. Signed-off-by: Ivy Foster <ivy.foster@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-31Replace CURLOPT_PROGRESSFUNCTION with CURLOPT_XFERINFOFUNCTIONIvy Foster
Curl 7.32.0 added CURLOPT_XFERINFOFUNCTION, which deprecates CURLOPT_PROGRESSFUNCTION and means less casting doubles to size_ts for alpm. This change has no user-facing nor frontend-facing effects. Signed-off-by: Ivy Foster <ivy.foster@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-08-30Normalize alpm download callback's frontend cb argumentsIvy Foster
When curl calls alpm's dlcb, alpm calls the frontend's cb with the following (dlsize, totalsize) arguments: 0, -1: initialize 0, 0: no change since last call x {x>0, x<y}, y {y>0}: data downloaded, total size known x {x>0}, x: download finished If total size is not known, do not call frontend cb (no change to original behavior); alpm's callback shouldn't be called if there is a download error. See agregory's original spec here: https://wiki.archlinux.org/index.php/User:Apg#download_callback Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Update copyright years for 2016Allan McRae
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-11Use correct format specifiersRikard Falkeborn
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01Update copyright notices for 2015Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-12-24create_tempfile: fix memory leak on errorAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-10-19dload: mark final_url as constChristian Hesse
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-10-16dload: unlink file on filesize exceeded errorChristian Hesse
On filesize exceeded error pacman leaves a .part file in cache dir, resulting in this error on next try: error: failed to commit transaction (wrong or NULL argument passed) Errors occurred, no packages were upgraded. Unlink the file on error to avoid this.
2014-10-16dload: use better error message on exceeded file sizeChristian Hesse
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-10-02alpm: Fix wrong xferred/total sizes when resuming downloadsOlivier Brunel
When a package is already partially downloaded in the cache, its download size will only be of what's left to be downloaded. Since pkg->download_size is what's used when calculating the total download size for the totaldl callback, same thing apply. However, the download progress callback was including this initial size, which would thus lead to invalid values (and percentage) used in frontends. That is, the progress bar could e.g. go further than 100% In the case of pacman, there is a sanity check for different historical reason (44a57c89), so before the possible "overflow" was noticed, the total download size/progress reported was wrong. Once caught, the TotalDownload option was ignored and it would use individual file download values as fallback instead. Signed-off-by: Olivier Brunel <jjk@jjacky.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-08-04filecache_find_url: dereference the 'filebase' pointerRyo Munakata
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-05-22dload: avoid using CURLOPT_FAILONERRORDave Reisner
Use of this flag causes connections to be closed on 404s -- a common occurrence when your config sets DatabaseOptional. Handle the error gracefully, so that the connection can be reused. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-01-28Remove ts and sw from vim modeline when noet is setFlorian Pritz
Forcing vim users to view files with a tabstop of 2 seems really unnecessary when noet is set. I find it much easier to read code with ts=4 and I dislike having to override the modeline by hand. Command run: find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} + Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-01-06Update copyright years for 2014Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-12-19dload: allow curl to response to any auth challengeDave Reisner
Previously, we only allowed the default of responding to basic auth challenges. Mirrors requiring authorization are far and away the edge case, but there's no sense in preventing access to them. Implements FS#38184. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-11-15Fix whitespace and other formatting issuesJason St. John
This commit: -- replaces space-based indents with tabs per the coding standards -- removes extraneous whitespace (e.g. extra spaces between function args) -- adds missing braces for a one-line if statement Signed-off-by: Jason St. John <jstjohn@purdue.edu>
2013-11-08Remove spaces between the opening "if" and the opening parenthesisJason St. John
Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18dload: avoid renaming files downloaded via sync operationsChristian Hesse
If the server redirects from ${repo}.db to ${repo}.db.tar.gz pacman gets this wrong: It saves to new filename and fails when accessing ${repo}.db. We need the remote filename only when downloading remote files with pacman's -U operation. This introduces a new field 'trust_remote_name' to payload. If set pacman downloads to the filename given by the server. The field trust_remote_name is set in alpm_fetch_pkgurl(). Fixes FS#36791 ([pacman] downloads to wrong filename with redirect). [dave: remove redundant assignment leading to memory leak] Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21Do not refer to FlySpray numbersAllan McRae
These references to bug numbers assume we will forever be using that bug tracker. It is better to properly comment the code instead (which was done in almost all cases anyway). Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Hide unused parameter warnings when building without libcurlAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05do not check error from close(2)Dave Reisner
On operating systems we support, the behavior is always such that the kernel will do the right thing as far as invalidating the file descriptor, regardless of the eventual return value. Therefore, potentially looping and calling close multiple times is wrong. At best, we call close again on an invalid FD and throw a spurious EBADF error. At worst, we might close an FD which doesn't belong to us when a multi-threaded application opens its own file descriptor between iterations of the loop. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24dload: don't download sig if package is found in cacheDave Reisner
Avoids the segfault seen in FS#33911. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-29dload: pass back the effective URL to callers of _alpm_downloadDave Reisner
I suspect that eventually we're going to end up returning a pointer to an allocated struct to describe the download result, but that's for another patch when the need arises... Fixes FS#33508. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-29Relax requirement of what constitutes a dead connectionLANGLOIS Olivier PIS -EXT
Users have hit issues behind corporate firewalls that initially throttle downloads to ~1B/sec. Signed-off-by: Olivier Langlois < olivier.pis.langlois@transport.alstom.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-17dload: avoid showing progress bars on some redirectsDave Reisner
RFC 2616 doesn't forbid a 301 or 302 repsonse from having a body, and servers exist in the wild that show this behavior. In order to prevent pacman from showing a progress bar when we aren't actually downloading a package (and merely following one of these pain in the butt redirects), capture the server response code in the response header, rather than waiting to peel it off the handle after the download has finished. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Reported-by: Alexandre Filgueira <alexfilgueira@cinnarch.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-03Update copyright year for 2013Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Plug various minor memory leaksAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-05-20fix -Wshadow warnings as reported by gcc 4.4.3Dave Reisner
Apparently gcc 4.7 has decided that -Wshadow warnings aren't worth reporting anymore even with the flag enabled. These were found on an Ubuntu 10.04 install. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-12Merge branch 'maint'Dan McGee
2012-04-09Fix issues with unintialized variable value usageDan McGee
Detected by clang scan-build static code analyzer. * Don't attempt to free an uninitialized gpgme key variable * Initialize answer variable before asking frontend a question * Pass by reference instead of value if uninitialized fields are possible in download signal handler code * Ensure we never call strlen() on NULL payload->remote_name value Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/sync.c
2012-03-14dload: reset payload filename members before downloadDave Reisner
To avoid conflicts on reusing a payload after a failed download, ensure that we reset the filename hints in the payload struct prior to the download operation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Merge branch 'maint'Dan McGee
Conflicts: contrib/pacsysclean.in src/pacman/conf.h
2012-02-20Print error message when to-be-downloaded file cannot be createdNagy Gabor
It can happen that the to-be-downloaded file cannot be created in cachedir. For example, I am an -Sup user, and it is comfortable to set --cachedir to /mnt/pendrive, which is a FAT filesystem, so files like capseo-1:0.3-2-i686.pkg.tar.xz cannot be downloaded to there. Before this patch, pacman didn't give clear output about what happens when the download code could not create the necessary file. This can be confusing with -Su. An example output: *** $ sudo pacman -S capseo bochs --cachedir /c/TEMP resolving dependencies... looking for inter-conflicts... Targets (2): bochs-2.4.6-1 capseo-1:0.3-2 Total Download Size: 0.61 MiB Total Installed Size: 2.61 MiB Proceed with installation? [Y/n] :: Retrieving packages from extra... warning: failed to retrieve some files from extra bochs-2.4.6-1-i686 611.5 KiB 118K/s 00:05 [------------------] 97% error: failed to commit transaction (unexpected error) Errors occurred, no packages were upgraded. *** After the patch, pacman will give more informative error message (and pm_errno is set properly): *** error: could not open file '/c/TEMP/capseo-1:0.3-2-i686.pkg.tar.xz.part': Invalid argument error: failed to commit transaction (failed to retrieve some files) *** Unfortunately, the "could not open file" error message is printed for every mirror (that can be dozens of lines), which is ugly, but at least informative... Without modifying the download logic (for example, by introducing -2 return value for _alpm_download() to indicate giving up), this ugliness cannot be eliminated. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-14Update SIGPIPE signal handler commentDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/diskspace.c src/pacman/util.h
2012-01-23lib/dload: give uniform naming to curl CB functionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23lib/dload: enforce usage of TCP keepalivesDave Reisner
This is particularly important in the case of FTP control connections, which may be closed by rogue NAT/firewall devices detecting idle connections on larger transfers which may take 5-10+ minutes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Update copyright on changed files since beginning of yearDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18fetch_url: look for files in cache before downloadingDave Reisner
We lost this logic somewhere between the libfetch and libcurl transition, as it existed in the internal downloader, but was pulled back only into the sync workflow. Add a helper function that will let us check for existance in the filecache prior to calling the downloader. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-21include config.h via MakefilesDave Reisner
Ensures that config.h is always ordered correctly (first) in the includes. Also means that new source files get this for free without having to remember to add it. We opt for -imacros over -include as its more portable, and the added constraint by -imacros doesn't bother us for config.h. This also touches the HACKING file to remove the explicit mention of config.h as part of the includes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Merge branch 'maint'Dan McGee
2011-12-05Enforce signature download size limit on -U <url> operationsDan McGee
We had a 16 KiB limit on database signatures, we should do the same here too to have a slight sanity check, even if we can't do so for the package itself yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Add OPEN() and CLOSE() util macrosDan McGee
These wrap the normal open() and close() low-level I/O calls and ensure EINTR is handled correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27dload: remove redundant conditionalDave Reisner
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27dload: chmod tempfiles to respect umaskDave Reisner
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>