| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The former is really old, and should be avoided.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In FS#43434, Downloads which fail and are restarted on a different server
will resume and may display a negative download speed. The payload's progress
in libalpm was not properly reset which ultimately caused terminal noise
because the line width calculation assumes positive download speeds.
This patch fixes the incomplete reset of the payload by mimicing what
be_sync.c:alpm_db_update() does over in sync.c:download_single_file().
The new dload.c:_alpm_dload_payload_reset_for_retry() extends beyond the
current behavior by updating initial_size and prevprogress for this case.
This makes pacman reset the progress properly in the next invocation of the
callback and display positive download speeds.
Fixes FS#43434.
Signed-off-by: Martin Kühne <mysatyre@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This does exactly the same thing as it code it replaces, but punt to
curl to do it for brevity. Requires curl 7.25.0, which we already cover.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows functions which return an _alpm_errno_t to always return a
genuine _alpm_errno_t for consistency, even in cases where there are
no errors. Since ALPM_ERR_OK = 0, their callers can still simply check
'err = some_fn(); if (!err) { ... }'.
Signed-off-by: Ivy Foster <ivy.foster@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Curl 7.32.0 added CURLOPT_XFERINFOFUNCTION, which deprecates
CURLOPT_PROGRESSFUNCTION and means less casting doubles to size_ts for
alpm. This change has no user-facing nor frontend-facing effects.
Signed-off-by: Ivy Foster <ivy.foster@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When curl calls alpm's dlcb, alpm calls the frontend's cb with the
following (dlsize, totalsize) arguments:
0, -1: initialize
0, 0: no change since last call
x {x>0, x<y}, y {y>0}: data downloaded, total size known
x {x>0}, x: download finished
If total size is not known, do not call frontend cb (no change to
original behavior); alpm's callback shouldn't be called if there is a
download error.
See agregory's original spec here:
https://wiki.archlinux.org/index.php/User:Apg#download_callback
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On filesize exceeded error pacman leaves a .part file in cache dir,
resulting in this error on next try:
error: failed to commit transaction (wrong or NULL argument passed)
Errors occurred, no packages were upgraded.
Unlink the file on error to avoid this.
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a package is already partially downloaded in the cache, its download
size will only be of what's left to be downloaded. Since pkg->download_size
is what's used when calculating the total download size for the totaldl
callback, same thing apply.
However, the download progress callback was including this initial size,
which would thus lead to invalid values (and percentage) used in frontends.
That is, the progress bar could e.g. go further than 100%
In the case of pacman, there is a sanity check for different historical
reason (44a57c89), so before the possible "overflow" was noticed, the total
download size/progress reported was wrong. Once caught, the TotalDownload
option was ignored and it would use individual file download values as
fallback instead.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use of this flag causes connections to be closed on 404s -- a common
occurrence when your config sets DatabaseOptional. Handle the error
gracefully, so that the connection can be reused.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Previously, we only allowed the default of responding to basic auth
challenges. Mirrors requiring authorization are far and away the edge
case, but there's no sense in preventing access to them.
Implements FS#38184.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the server redirects from ${repo}.db to ${repo}.db.tar.gz pacman gets
this wrong: It saves to new filename and fails when accessing
${repo}.db.
We need the remote filename only when downloading remote files with
pacman's -U operation. This introduces a new field 'trust_remote_name'
to payload. If set pacman downloads to the filename given by the server.
The field trust_remote_name is set in alpm_fetch_pkgurl().
Fixes FS#36791 ([pacman] downloads to wrong filename with redirect).
[dave: remove redundant assignment leading to memory leak]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These references to bug numbers assume we will forever be using that bug
tracker. It is better to properly comment the code instead (which was
done in almost all cases anyway).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On operating systems we support, the behavior is always such that the
kernel will do the right thing as far as invalidating the file
descriptor, regardless of the eventual return value. Therefore,
potentially looping and calling close multiple times is wrong.
At best, we call close again on an invalid FD and throw a spurious EBADF
error. At worst, we might close an FD which doesn't belong to us when a
multi-threaded application opens its own file descriptor between
iterations of the loop.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Avoids the segfault seen in FS#33911.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
I suspect that eventually we're going to end up returning a pointer to
an allocated struct to describe the download result, but that's for
another patch when the need arises...
Fixes FS#33508.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Users have hit issues behind corporate firewalls that initially throttle
downloads to ~1B/sec.
Signed-off-by: Olivier Langlois < olivier.pis.langlois@transport.alstom.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
RFC 2616 doesn't forbid a 301 or 302 repsonse from having a body, and
servers exist in the wild that show this behavior. In order to prevent
pacman from showing a progress bar when we aren't actually downloading a
package (and merely following one of these pain in the butt redirects),
capture the server response code in the response header, rather than
waiting to peel it off the handle after the download has finished.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Reported-by: Alexandre Filgueira <alexfilgueira@cinnarch.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Apparently gcc 4.7 has decided that -Wshadow warnings aren't worth
reporting anymore even with the flag enabled. These were found on
an Ubuntu 10.04 install.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Detected by clang scan-build static code analyzer.
* Don't attempt to free an uninitialized gpgme key variable
* Initialize answer variable before asking frontend a question
* Pass by reference instead of value if uninitialized fields are
possible in download signal handler code
* Ensure we never call strlen() on NULL payload->remote_name value
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
|
|
To avoid conflicts on reusing a payload after a failed download, ensure
that we reset the filename hints in the payload struct prior to the
download operation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
contrib/pacsysclean.in
src/pacman/conf.h
|
|
It can happen that the to-be-downloaded file cannot be created in cachedir.
For example, I am an -Sup user, and it is comfortable to set --cachedir to
/mnt/pendrive, which is a FAT filesystem, so files like
capseo-1:0.3-2-i686.pkg.tar.xz cannot be downloaded to there.
Before this patch, pacman didn't give clear output about what happens when
the download code could not create the necessary file. This can be confusing
with -Su. An example output:
***
$ sudo pacman -S capseo bochs --cachedir /c/TEMP
resolving dependencies...
looking for inter-conflicts...
Targets (2): bochs-2.4.6-1 capseo-1:0.3-2
Total Download Size: 0.61 MiB
Total Installed Size: 2.61 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from extra...
warning: failed to retrieve some files from extra
bochs-2.4.6-1-i686 611.5 KiB 118K/s 00:05 [------------------] 97%
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
***
After the patch, pacman will give more informative error message (and
pm_errno is set properly):
***
error: could not open file '/c/TEMP/capseo-1:0.3-2-i686.pkg.tar.xz.part': Invalid argument
error: failed to commit transaction (failed to retrieve some files)
***
Unfortunately, the "could not open file" error message is printed for
every mirror (that can be dozens of lines), which is ugly, but at least
informative... Without modifying the download logic (for example, by
introducing -2 return value for _alpm_download() to indicate giving up),
this ugliness cannot be eliminated.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/diskspace.c
src/pacman/util.h
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is particularly important in the case of FTP control connections,
which may be closed by rogue NAT/firewall devices detecting idle
connections on larger transfers which may take 5-10+ minutes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We lost this logic somewhere between the libfetch and libcurl
transition, as it existed in the internal downloader, but was pulled
back only into the sync workflow. Add a helper function that will let us
check for existance in the filecache prior to calling the downloader.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
We had a 16 KiB limit on database signatures, we should do the same here
too to have a slight sanity check, even if we can't do so for the
package itself yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These wrap the normal open() and close() low-level I/O calls and ensure
EINTR is handled correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|