Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/etc/pacman.conf.in
AgeCommit message (Collapse)Author
2018-06-18pacman.conf: Fixup the XferCommand example for curlLuke Shumaker
1. Without `-L`, curl doesn't follow redirects. This is different than both the default behavior of pacman, and from the wget example. So add `-L`. 2. It uses `-C -` to supposedly allow resuming partial downloads; but that doesn't work if we use `> %o` to direct the output to the file. Instead, use `-o %o` so that `-C -` actually works. Signed-off-by: Luke Shumaker <lukeshu@parabola.nu> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-29Add HookDir to example pacman.confAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14Add Local/RemoteFileSigLevel to example configAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14pacman.conf: Remove empty line at end of fileEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07update documentation and config filesSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-04-12Remove SyncFirst optionDan McGee
This has outlived its usefulness and causes more problems than it solves. It has historically only ever been used to install pacman first. That should not be needed given we provide the vercmp utility (which has no library dependencies) and so calling pacman in install scripts is a sign of poor packaging. Work-duplicated-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Allow UseDelta option to specify a delta ratioDan McGee
Rework the frontend and backend to allow passing a ratio value in for UseDelta rather than having a hardcoded #define-d 0.7 value always used. This is useful for those with fast connections, who would likely benefit from tuning this ratio to lower values; it is also useful for general testing purposes. The libalpm API changes for this, but we do support the old config file format with a no-value 'UseDelta' option; in this case we simply use the old default of 0.7. We clamp the ratio values to a sane range between 0.0 and 2.0, allowing ratios above 1.0 for testing purposes. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Enable CheckSpace by default in default config fileDan McGee
This will have to be picked up downstream of course, but addresses FS#25684 now that this is a lot faster in 4.0 than it was in the original 3.5 implementation. Also make curl the first XferCommand listed, as we are moving away from any other download program at this point. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Add short example signature config to pacman.confDan McGee
This is similar to what we do with every other option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-01Update pacman manpage and pacman.conf for gpgdirPang Yan Han
pacman.8.txt --gpgdir section is updated based on the pacman.conf manpage pacman.conf is updated to include the default GPGDir Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20New VerbosePkgLists optionJakob Gruber
If enabled, displays package lists for upgrade, sync and remove operations formatted as a table. Falls back to default list display if insufficient terminal columns are available. Example output: :: Starting full system upgrade... :: Replace libjpeg with testing/libjpeg-turbo? [Y/n] resolving dependencies... looking for inter-conflicts... Remove (1): Name Old Version Size libjpeg 8.3.0-1 0.83 MB Total Removed Size: 0.83 MB Targets (5): Name Old Version New Version Size libjpeg-turbo 1.1.0-1 0.20 MB linux-firmware 20110201-1 20110227-1 8.23 MB ncurses 5.7-4 5.8-1 0.92 MB ppl 0.11.1-1 0.11.2-1 2.74 MB v4l-utils 0.8.1-1 0.8.3-1 0.23 MB Total Download Size: 12.32 MB Total Installed Size: 58.82 MB Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Remove ShowSize optionJakob Gruber
Dan: The commit message originally referenced "VerbosePkgLists", but I'm going to change the name of the option. In addition, this patch serves a purpose being standalone- we should really do things like this with -S --print and hopefully -Q --print in the future. Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29Merge branch 'maint'Dan McGee
2011-01-28Enable failure on server error for curl download commandDan McGee
This will make a 404 a silent failure that returns an error code rather than 0 as was previously done, screwing up the logic used by pacman/libalpm to allow moving onto the next server on a failed download. Fixes FS#22630. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add configuration option to control disk space checkingAllan McRae
Disk space checking is likely to be an unnecessary bottleneck to people with reasonable partition sizes so add a configuration option to allow it to be disabled/enabled as wanted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15pacman.conf : enable resuming for curlXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Allow $arch to be used in ServerXavier Chantry
similarly to the $repo variable, Server can now contain $arch, which will be automatically replaced by the appropriate architecture. This allows us to have one universal mirrorlist file, for both i686 and x86_64, woohoo! Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Add Architecture and --arch optionXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-18dload.c : various fixesXavier Chantry
- fix one memleak if get_filename failed - cleanup according to Joerg's feedback: "url_for_string: If fetchParseURL returned successful, you should always have a scheme set. The logic for anonftp should only be needed for very broken server -- do you know of any such? download_internal: Specifying 'p' is now a nop -- it is tried by default first with fall-back to active FTP." Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: remove from pacman.conf and pacman.conf.5] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13pacman.conf : add curl example for XferCommand.Xavier Chantry
curl is likely to be available on the majority of systems and supports the file:// protocol. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Put CleanMethod to pacman.conf (commented out)Nagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Various updates needed prior to a new releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-10Show options in pacman.conf (commented out)Nagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2008-01-14etc: remove Arch-specific mirrorlist from repoDan McGee
We shouldn't have the stock config be Arch specific for a few reasons: * Although it is our package, others should be able to use it * Keeping the mirrorlist coupled to the pacman package makes it hard to push updates to users without releasing a new copy of the pacman source Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-14Clean up pacman.conf.inTravis Willard
This patch cleans up the Arch-specific pacman.conf (to be provided in the pacman Archlinux package) in an attempt to reduce the number of PEBKAC errors seen enabling default-disabled repos. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-05Comment out paths by default in pacman.confDan McGee
Now that all paths are defined to reasonable defaults at compile time by pacman, we shouldn't force users to have RootDir, DBPath, etc. in their default pacman.conf although these options are always available. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Make changes for Arch Linux current -> core changeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-16Use only one mirror list for all reposChantry Xavier
Fully implement what this commit allows: ebad1996149d72cf4a1fe15fe8326f2b4996f585 Dan: update .gitignore as well. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27Remove lockfile configuration from frontend, make it job of libalpmDan McGee
I previously introduced some patches to make just about every path in pacman/libalpm configurable; doing this with the lockfile seemed a bit too far and we really should just place the lockfile where it belongs- with the DB that needs locking. More details in this thread: http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-04Start moving hardcoded paths out of libalpmDan McGee
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into pacman.conf, just as LogFile was done before. Add a section to alpm_parse_config to look for a LockFile directive. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-05-31Autotool fixes/cleanup.Andrew Fyfe
* configure.ac: Add AC_SUBST() for ROOTDIR, PKGEXT, DBEXT so they get exported to Makefiles. * {makepkg,pacman}.conf.in: Remove extra / from paths. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-05-30Use @sysconfdir@ in etc/ configuration filesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-24* Added a mirror list for [testing] (it appears most mirrors mirror testing)Aaron Griffin
* Commented ftp.archlinux.org in the official mirror list * ran a make dist, which updated some translation files
2007-03-04* handle changes: callbacks should check handle first, as there's a fewAaron Griffin
occasions where some alpm stuff could be used without initializing the library (vercmp is one). TODO make these functions (handle accessors) better by returning "library not initialized" instead of failing. * Removed NoUpgrade lines from pacman.conf - we need to test this! * Re-corrected the lib targets for src/util/* * make dist seems to have updated the po files
2007-02-13Fix some x86_64 configuration handlingAaron Griffin
2007-01-26* Fix FS #3107- Use ISO date styleAaron Griffin
* Fix FS #5409- document that pacman.conf repo ordering is important Signed-off-by: Dan McGee <dpmcgee@gmail.com>
2006-12-21Restored NoUpgrade options - see ↵Aaron Griffin
http://www.archlinux.org/pipermail/pacman-dev/2006-December/000838.html for details
2006-12-08Merged some proposed changes from "Dan McGee" <dpmcgee@gmail.com>Aaron Griffin
* Removal of confusing sortmirrors comment * Removal of NoUpgrade defaults (handled by packages) * Move of unstable below community, to illustrate preference.
2006-10-15Whoops forgot some .in filesAaron Griffin