| Age | Commit message (Collapse) | Author |
|---|
|
Remove blank lines immediately following section headings.
Ensure two blank lines before the start of a new section.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Notable changes:
* Add double quotes around printf-like formatting options for "--print-format"
* Add a missing backslash in '--force'
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This introduces support for architecture-specific conflicts, depends,
optdepends, makedepends, replaces, and conflicts by appending "_$CARCH"
to the array name. For example, in the global section:
arch=('i686' 'x86_64')
depends=('foo')
depends_x86_64=('bar')
This will generate depends of 'foo' and 'bar' on x86_64, but only 'foo'
on i686. Moreover, this is supported in the package functions with the
same heuristics as the generic names, e.g.
...
arch=('i686' 'x86_64')
depends=('foo')
...
package_somepkg() {
depends_x86_64=('bar')
...
}
Again, will cause x86_64 to have depends of 'foo' and 'bar', but only
'foo' for i686.
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This option is only for HTML output, and we're building manpages here.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add an array VCSCLIENTS to makepkg.conf that matches vcs source protocols
to the package containing the software needed for handling the source.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add support for following the XDG Base Directory Specification when
reading the user-specific configuration file.
If no $XDG_CONFIG_HOME/pacman/makepkg.conf file exists we fall back to
sourcing $HOME/.makepkg.conf
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
[Allan] Note XDG_CONFIG_HOME takes priority.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If validpgpkeys is set in the PKGBUILD, signature checking fails if
the fingerprint of the key used to create the signature is not listed
in the array.
The key's trust value is ignored.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packaging outside of fakeroot can result in incorrect permissions for
package files. It has been years since fakeroot issues during packaging
were common, so it is safe to enforce fakeroot usage. If using fakeroot
is impossible for some reason, a two line wrapper script will suffice to
fool makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Another small patch that I made long ago (but was too lazy to submit
back then).
When using XferCommand, TotalDownload option is not take into account.
Regards, Matthias
>From bff946cd9969b6bc6243875e0759f0ee02e487de Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Matthias=20Kr=C3=BCger?= <matthias.krueger@famsik.de>
Date: Thu, 9 May 2013 13:21:04 +0200
Subject: [PATCH] doc: pacman.conf: note that TotalDownload and XferCommand
options are incompatible.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Matthias Krüger <matthias.krueger@famsik.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The change log prototype should be distribution determined.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
around "gpg" command
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Allowing multiple databases with the same name causes conflicts as they
both point to the same database file but may use different servers,
usages, or siglevels.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It is fairly common that packages contain static libraries with no
shared counterpart. These should not be removed with !staticlibs.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Detail the current standard of generating two databases - with and
without the file list.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
[Allan: Adjust wording due to remove al license warning]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
--print-format is totally useless without --print. Implying --print
will also save us the hassle of checking it when we add transaction
option validation.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
a package.
Implements FS#17175.
[Allan: Minor changes to output strings, fix removing of source directory]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add a "Usage" key to the repo section of the config which allows for the
tokens "Search", "Install", "Upgrade", "All", which correspond to values
in the alpm_db_usage_t enum. Users can specify "Usage" multiple times
for a given repo, or multiple flags per "Usage" line and they will be
OR'd together. If unspecified, the default is full usage of the repo.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Looks like I fat fingered something when I refactored the original
submissions. Woops.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It is now possible to invert patterns in NoExtract and NoUpgrade.
This feature allows users to whitelist certain files that were
previously blacklisted by another entry.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Specify it twice to only filter direct dependencies.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When maintaining a custom repo, often it is undesirable to retain older
versions of packages. This patch adds the --remove option to remove the
current package file and it's signature from disk before adding the new
one to the database. Documentation is also updated. This is an optional
flag and default behaviour (leaving ondisk files alone) is not changed.
Signed-off-by: Phillip Smith <fukawi2@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Adding this restriction means we can filter any FILENAME entry from
starting with a "/" or a ".". Use the term "dot" as it is more
computing relevant compared to "full stop" or "period" which vary
depending on English locale.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Resolve several grammatical errors and minor formatting consistency issues
in pacman(8). Generalize the "FTP servers" and package file extension
information.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Resolve several grammatical errors and minor formatting consistency issues
in PKGBUILD(5).
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows for somewhat easy templating for PKGBUILDs.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Update doc/PKGBUILD-example.txt with several changes from the official
Arch Linux package for patch-2.7.1-1, including other changes shown below:
-- replaces spaces with tabs in functions
-- replaces 'make prefix=' with 'make DESTDIR='
-- improves quoting of the "cd" command in functions
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|