| Age | Commit message (Collapse) | Author |
|---|
|
When pacman is run as root to do -S, -U, or -R, it would immediately
abort if pacman is not ready for use. Instead, poll the lockfile and
wait until it becomes available.
Implements FS#28840
Original-patch-by: Georges Dubus <georges.dubus@compiletoi.net>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This has historically been the case in autotools since we want vercmp to
not break mid-transaction in an install script.
For convenience, we create libalpm.a and use this to optionally generate
libalpm.so (when not configured with -Dbuildstatic=true) as well as to
link any binary which explicitly wishes to be built statically "with
libalpm", but does not care where a function is defined. meson then
treats this correctly: it builds the object file only once for both
libraries, and the compiler strips out unused functionality from the
final static binary.
Currently the only binary which requires this is vercmp.
Fixes FS#61719
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Requires modification to our comment about fall through to match compilers
expectations. Works for GCC and Clang.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a mirror responds with a 301 redirect to itself, it will create an
infinite redirect loop. This will cause pacman to hang, unresponsive to
even a SIGINT. The result is pacman being unable to sync or
download any package from a particular repo if its current mirror
is stuck in a redirect loop. Setting libcurl's MAXREDIRS option
effectively prevents a redirect loop from hanging the process.
Signed-off-by: Mark Ulrich <mark.ulrich.86@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them
raise an error.
This also disallows using 'any' as an architecture specific variable
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg will now error if disallowed variables are set inside of
the package function.
Disallowed variables are variables that do exist, like 'makedepends'
and 'pkgver' but can not be set inside of a package function.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This patch was inspired by FS#32723 which asks makepkg to install makedepends
before depends. The use case is to build a package depending on a virtual
package that is only provided by other packages (e.g. java-runtime in Arch
Linux), but wanting to build against a specific version. Installing makedepends
first (but not at the same time as depends) would allow specifying the version
to build against, instead of pacman resolving to the default version when
installing depends.
It turns out, we can already achieve installing makedepends first by specifying
dependencies only in the package function (and making sure makedepends includes
everything needed). The only issue is that if we use makepkg to install the
built package with the --install flag and along with the --rmdeps flag, we will
try to remove any installed dependencies that are specified in the depends
array in the package function. To counter this, we need to use the --unneeded
flag for the pacman call.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New verification protocols can
then be added via thirdparty libmakepkg drop-ins without requiring
modifications to verify_signature.sh
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New source protocols can then be
added via thirdparty libmakepkg drop-ins without requiring modifications
to source.sh
Fixes FS#49076
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Making the undescore be translated is probably not something we need
translators to think about.
Additionally, a number of places which use the same text differ only by
the variable being referenced, so simplifying the string means we can
drop a redundant translation.
Bonus: we save a few bytes here and there. \o/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Error if the arch array contains any and any other values. This also
fixes a bug where the check for `$arch == 'any'` which only evaluated
the first value in the array, meaning the rest of the values would not
be linted.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A number of pages don't actually exist as html inside the source tree,
and need to be generated even though they are manpages.
This caused the website.tar.gz target to only work inside a dirty tree
initially created by autotools.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
projects.archlinux.org and mailman.archlinux.org are both migrated to
new domains.
Transifex supports https, so encourage its use by default.
Take advantage of the opportunity when updating these links, to also
delist some projects that are dead.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The index embeds the names of all doc subpages, and these were never
updated.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We forgot to add BUILDINFO to the list of html docs. Instead of always
updating things in two places, just derive the one from the other.
meson did not have this problem as it already derives both lists from
one template.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit f7efa6a93d5361af610827d41045d87c7a72f2b5 we added a new file,
and also wired it up to the build systems, but it got added under the
wrong name in meson.build
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is not really an error with a "user function".
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use mapfile instead of hacking around read -a with the $IFS.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This can only ever be an int, and the specification states that a
malformed timestamp should be considered a fatal error.
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
paths can contain printf-unsafe chars, and printf -v is not somehow immune to this
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If you have a malformed pkgrel, the error message says that it must be a
"decimal". That isn't quite true, as that would mean that `1.1 == 1.10`.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
opt)depends/provides/conflicts
Given the depends
depends=('foo>=1.2-1.par2')
and the error message
==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace.
One would be lead to believe that the problem is that they gave a pkgrel in
depends at all, not that the pkgrel contains letters.
Each of the (check,make,opt)depends, conflicts, and provides linters use a
glob to trim off properly formed epoch an rel from the full version string,
and pass the remainder to check_pkgver(). This does a good job of
accepting/rejecting full versions, but doesn't do a good job of generating
good error messages when rejecting if it's because of the epoch or rel.
1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and
lint_pkgrel(), similarly to check_pkgver().
2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and
splits it in to epoch/ver/rel, and calls the appropriate check_ function
on each.
3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and
provides linters.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checking the length of the variable to be non-zero before considering it
an error is inconsistent; license=() and depends='' and `declare arch`
should be considered just as wrong.
In fact the current check detects depends='' as non-zero and returns an
error, but happily considers the others to be perfectly okay.
A more reliable check is to simply see if the name has been declared
(whether it is set or not), and then enforce that it's been declared to
the right type.
As an added benefit, avoiding the creation of proxy-evaled variables to
count the number of indexes results in simpler code.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
List all available updates in -Qu output, but include [ignored] beside
those that will not be updated in a -Su operation due to thier repo Usage
value (in addition to those that are Ignored).
Fixes FS#59854.
The following people provided initial patches to print [ignored] on -Qu
operations, which highlighted a larger problem to be fixed first:
With-thanks-to: morganamilo <morganamilo@gmail.com>
With-thanks-to: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The behaviour of "pacman -Qu" was very strange... It would only consider
packages from repos with Usage = Search (or All), and ignore those with
Usage = Sync, Install or Upgrade.
This is because the function alpm_sync_newversion() used ALPM_DB_USAGE_SEARCH
for its filtering. Given this function is documented (at least in the source)
to "Check for new version of pkg in sync repos", I would expect that to look at
all repos. However, just changing this parameter, would result in a fairly
silent change in behaviour of this function. Instead, rename the function
and remove this filtering altogether. Users of this function can filter
the dbs passed to this function to achieve their desired output.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The alignment was not overly helpful and caused unnecessary churn when a new
value with longer name was added.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 0994893b0e6b627d45a63884ac01af7d0967eff2 added the
alpm_pkg_get_{make,check}depends functions but forgot to include
logic for parsing these fields from the database. As a result these
functions will always return an empty list.
This commit adds the parsing logic.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit d8ee8d0c99c3820951e2e49dbdb71a5390bd1dc4 we made use of
fakeroot absolutely mandatory, and disabled a lot of the code which
checked to see if this now-defunct BUILDENV option was set, before
setting up the environment to use fakeroot. Unfortunately, we missed one
spot.
The check_software routine still checked to see if fakeroot was
enabled, but due to the option being removed, thought that it was in
fact disabled, and as a result this check would never run.
Fix by checking to see if we are trying to build either a package or a
source package, and if so, checking for fakeroot. These are the only two
situations where fakeroot is needed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There are state variables for everything else, and we use them to do
conditional checks on things, but it's currently a bit difficult to test
whether a package is being built, as it's the default action if *no*
options are specified.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Causes it to be reset (to $pkgdirbase/$pkgbase) between subpackages.
This shouldn't be visible.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Merge the similar code handling unsplit PKGBUILDs and individual
packages in a split PKGBUILD and make it a new function.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We don't need to re-backup the variables we restored on the previous
iteration.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
While at it and for consistency move the assignment of the variable
'local' into the subsequent conditional.
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
sync:
As pointed out by Andrew Gregory there could be an error when adding
duplicates if they are two separate packages with the same name. Add a
check in alpm_add_pkg() to test whether the duplicate is actually the
same package, and if so, log a debug message and return success to skip
the package. If the duplicate is a different package return
ALPM_ERR_TRANS_DUP_TARGET and treat that error just like any other error
in pacman.
remove:
Change alpm_remove_pkg() to just log a debug message and return success
to skip duplicates. Remove the handling of ALPM_ERR_TRANS_DUP_TARGET in
pacman.
Also fixes FS#49377.
Suggested-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Our sed parser for xdelta3 headers will greedily match on ":" which
coincidentally is also the character we use to define a version with an
epoch.
While we are at it, simply use sed for the whole pipeline, rather than
using both grep and sed.
Fixes FS#61195
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We have code in order to remove deltas when removing a package, but it
is never run, since we try to remove the wrong file.
This was broken in commit cb0f2bd0385f447e045e2b2aab9ffa55df3c2d8a which
modified the internal layout we use to modify the db, changing "tree" to
"db", but did not update all locations where it was used.
This worked swimmingly well as long as only repo-add updates were
handling the backup and restore of the delta file, as the delta file
therefore got backed up to the correct location (db) in the shared
db_remove_entry() function.
But later on in the repo-remove logic, we tried removing a different
file that will never exist (tree).
Fixes FS#53041
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Previously, pacman's test suite would fail when compiled without
signature support.
Adds a require_capability method to pmtest objects. Currently
recognized values are 'gpg', 'curl', and 'nls'; although only gpg is
used presently. Missing features are indicated by running pactest with
one of the --without-<feature> options.
This modifies pmenv to run each case as independent tests. Previously,
a single pmenv could run multiple tests, combining there output into
a single TAP stream but making it impossible to properly skip an entire
test case. This change does not affect running pactest.py with a single
test (as both autotools and meson do), but will affect anybody manually
running pactest.py with multiple tests at once.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Unused since 12e00af5315135a29a66c9aaa01e141a32d4634b
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew@archlinux.org>
(cherry picked from commit f8c73464c9cf86d6b917542585d74514f150c67b)
|