Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-10libmakepkg: extend compress.sh to also permit checking validityEli Schwartz
get_compression_command() can now be used to do upfront checks for whether a given extension is known to do something successfully. This is useful when writing tools in which an unknown compression type is a fatal error. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-14doc/makepkg.8: Added punctuations.Morten Linderud
Signed-off-by: Morten Linderud <morten@linderud.pw> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-14Check that destfile_name exists before using itAnatol Pomozov
In some cases (when trust_remote_name is used for a URL without a filename and no Content-Disposition is provided by the server) destfile_name will be NULL. In this case payload data will be stored in tempfile_name and no destfile_name is set. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-14Do not free payload fields in the middle of this structure useAnatol Pomozov
At the end of payload use it calls _alpm_dload_payload_reset() that will free() these and other fields anyway. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-14Build signature remote name based on the main payload nameAnatol Pomozov
The main payload final name might be affected by url redirects or Content-Disposition HTTP header value. We want to make sure that accompanion *.sig filename always matches the package filename. So ignore finalname/Content-Disposition for the *.sig file. It also helps to fix a corner case when the download URL does not contain a filename and server provides Content-Disposition for the main payload but not for the signature payload. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-07Fallback to detached signatures during keyring checkAnatol Pomozov
Pacman has a 'key in keyring' verification step that makes sure the signatures have a valid keyid. Currently pacman parses embedded package signatures only. Add a fallback to detached signatures. If embedded signature is missing then it tries to read corresponding *.sig file and get keyid from there. Verification: debug: found cached pkg: /var/cache/pacman/pkg/glib-networking-2.64.3-1-x86_64.pkg.tar.zst debug: found detached signature /var/cache/pacman/pkg/glib-networking-2.64.3-1-x86_64.pkg.tar.zst.sig with size 310 debug: found signature key: A5E9288C4FA415FA debug: looking up key A5E9288C4FA415FA locally debug: key lookup success, key exists Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-07FS#33992: force download *.sig file if it does not exist in the cacheAnatol Pomozov
In case if *.pkg exists but *.sig file does not we still have to pass the pkg to multi_download API. To avoid redownloading *.pkg file we use CURLOPT_TIMECONDITION curl option. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-07Add a utility function to check whether a file exists in the cacheAnatol Pomozov
It is similar to _alpm_filecache_find() but does not return a dynamically allocated memory to user. Thus the user does not need to free this resource. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-07Do not use counter for error trackingAnatol Pomozov
Current code uses an incrementing counter to check whether a function returned error: errors += some_function(); if(errors) { goto finish } Replace with a more standard variable errors = some_function(); if(errors) { goto finish } Rename 'errors' variable to a more typical 'ret'. Avoid reporting both ALPM_EVENT_PKG_RETRIEVE_FAILED and ALPM_EVENT_PKG_RETRIEVE_DONE in the error path. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-07-07Move signature payload creation to download engineAnatol Pomozov
Until now callee of ALPM download functionality has been in charge of payload creation both for the main file (e.g. *.pkg) and for the accompanied *.sig file. One advantage of such solution is that all payloads are independent and can be fetched in parallel thus exploiting the maximum level of download parallelism. To build *.sig file url we've been using a simple string concatenation: $requested_url + ".sig". Unfortunately there are cases when it does not work. For example an archlinux.org "Download From Mirror" link looks like this https://www.archlinux.org/packages/core/x86_64/bash/download/ and it gets redirected to some mirror. But if we append ".sig" to the end of the link url and try to download it then archlinux.org returns 404 error. To overcome this issue we need to follow redirects for the main payload first, find the final url and only then append '.sig' suffix. This implies 2 things: - the signature payload initialization need to be moved to dload.c as it is the place where we have access to the resolved url - *.sig is downloaded serially with the main payload and this reduces level of parallelism Move *.sig payload creation to dload.c. Once the main payload is fetched successfully we check if the callee asked to download the accompanied signature. If yes - create a new payload and add it to mcurl. *.sig payload does not use server list of the main payload and thus does not support mirror failover. *.sig file comes from the same server as the main payload. Refactor event loop in curl_multi_download_internal() a bit. Instead of relying on curl_multi_check_finished_download() to return number of new payloads we simply rerun the loop iteration one more time to check if there are any active downloads left. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-26srcinfo.sh: remove trailing newlineDenton Liu
When a .SRCINFO file is generated via `makepkg --printsrcinfo`, each section is concluded with an empty line. This means that at the end of the file, an empty line remains. This is considered a trailing whitespace error. In fact, `git diff --check` will warn about this, saying "new blank line at EOF." Instead of closing each section off with an empty line, use the empty line to separate sections, omitting the empty line at the end of the file. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-26Cleanup the old sequential download codeAnatol Pomozov
All users of _alpm_download() have been refactored to the new API. It is time to remove the old _alpm_download() functionality now. This change also removes obsolete SIGPIPE signal handler functionality (this is a leftover from libfetch days). Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
2020-06-26Convert '-U pkg1 pkg2' codepath to parallel downloadAnatol Pomozov
Installing remote packages using its URL is an interesting case for ALPM API. Unlike package sync ('pacman -S pkg1 pkg2') '-U' does not deal with server mirror list. Thus _alpm_multi_download() should be able to handle file download for payloads that either have 'fileurl' field or pair of fields ('servers' and 'filepath') set. Signature for alpm_fetch_pkgurl() has changed and it accepts an output list that is populated with filepaths to fetched packages. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
2020-06-19doc/pacman.8: fix typoEli Schwartz
Fixes FS#67000 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-15pacman-key: change signing key to RSA4096Allan McRae
RSA2048 may have been fine when this was written many moons ago, but time this has a bump. Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11makepkg/repo-add: do not accept public-only keys for signingEli Schwartz
If it's not listed by --list-secret-key we don't care if it has been imported into your keyring, it's unusable. And you might not have a private key at all in the no-keyid-specified case. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11makepkg/repo-add: handle GPGKEY with spacesEli Schwartz
We pass this to gpg -u and this gpg option can accept a number of different formats, not just the historical hexadecimal fingerprint we assumed. We should not barf hard if a format is used which happens to contain spaces. This also fixes a validation bug. When we initially check if the desired key is available, we don't quote spaces, so gpg goes ahead and treats each space-separated string as a *different key* to search for, returning partial matches, and returning success if at least one key is found. But gpg --detach-sign -u will certainly not accept multiple keys! Fixes FS#66949 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11libmakepkg: fix regression in sending plain() output to stderrEli Schwartz
In commit 882e707e40bbade0111cf3bdedbdac4d4b70453b we changed message output to go to stdout by default, unless it was an error. The plain() function doesn't *look* like an error function, but in practice it was -- it's used to continue multiline messages, and all in-tree uses were for warning/error. This is a problem both because we're sending output to the wrong place, and because in some cases, we were performing error logging from a function which would otherwise return a value to be captured in a variable using command substution. Fix this and straighten out the API by providing two functions: one for continuing msg output, and one which wraps this by sending output to stderr, for continuing error output. Change all callers to use the second function.
2020-06-11makepkg: correctly handle missing download clientsEli Schwartz
This was broken in commit 882e707e40bbade0111cf3bdedbdac4d4b70453b, which changed 'plain()' messages to go to stdout, which was then captured as the download client in question: cmdline=("Aborting..."). The result was a very confusing error message e.g. /usr/share/makepkg/source/file.sh: line 72: $'\E[1m': command not found or with makepkg --nocolor: /usr/share/makepkg/source/file.sh: line 72: Aborting...: command not found The problem here is that we checked to see if an asynchronous subshell, in our case <(...), failed, by checking if its captured stdout is non-empty. Which is terrible, and also a limitation of old bash. But bash 4.4 can use wait $! to retrieve the return value of an asynchronous subshell. Now we target that as our minimum, we can sanely handle errors in such functions. Losing error messages on stdout by capturing them in a variable instead of printing them, continues to be a problem, but this will be fixed systematically in a later commit. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11makepkg: guard against undefined git pinned sourcesEli Schwartz
If something like source=(..."#commit=") is used, e.g. due to failed variable expansion, we try to check out an empty refspec as nothing at all, and end up just running "git checkout". This happens because we fail at variable expansion too -- so let's quote our variables properly and make sure git sees this as an empty refspec, so it can error out. Also make sure it is interpreted as a ref instead of a path. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11build: add libintl dependency to meson and the .pc fileEli Schwartz
In order to use gettext on systems where it is not part of libc, the correct linker flags are needed in libalpm.pc (for static compilation). This has never been the case. The new meson build system currently only checks for ngettext in libc, but does not fall back to searching for the existence of -lintl; add it to the libalpm dependencies. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-11ci: cache packagesFilipe Laíns
Results in ~40s saved in each job. Signed-off-by: Filipe Laíns <lains@archlinux.org>
2020-06-11Revert "makepkg: drop duplicate reporting of missing dependencies"Allan McRae
This removed all information on dependency failures if the --syncdeps flag was not used. A better approach is needed. This reverts commit 4246a4cc4f0f87642cbbb6b375524b2e4c713412. Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-01libalpm/signing.c: Fix calculation of packet size in parse_subpacketAllan McRae
Given RFC 4880 provides the code to do this calculation, I am not sure how I managed to stuff that up! This bug was only exposed when a signature made with "include-key-block" was added to the Arch repos, which provided a subpacket with the required size to hit this issue. Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-01Avoid depending on side effects in assert(...) expressionsDave Reisner
When building with -DNDEBUG, assert statements are compiled out to no-ops. Thus, we can't depend on assignments or other computations occurring inside the assert(). Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-01libmakepkg/strip: don't re-add the same debug source multiple timesEli Schwartz
It's either a waste of work, or triggers edge cases in some packages (like coreutils-8.31) where the source file is readonly and cp gets a permission denied error trying to overwrite it with an identical copy of itself. Also while we are at it, make the variable names be something readable, because I could barely tell what this was doing while editing it. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-06-01Remove autotools supportAllan McRae
This removes support for autotools in favour of meson.
2020-05-11makepkg: deterministic PKGINFO libprovides for multiple library versionsLevente Polyak
While iterating over the provides array, the find call for locating a shared library may result in listing multiple entries which by itself does not produce a stable deterministic order and may vary depending on the underlying filesystem. To provide a stable listing and a reproducible .PKGINFO file the result of find is piped to sort with a static LC_ALL=C localisation. Signed-off-by: Levente Polyak <anthraxx@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-11Log invalid conf settings as an errorEli Schwartz
This is not a warning, _parse_options() returns failure without even parsing further lines and the attempted pacman/pacman-conf program execution immediately aborts. Warnings are for when e.g. later on if we don't recognize a setting at all, we skip over it and have enough confidence in this to continue executing the program. The current implementation results in pacman-conf aborting with: warning: config file /etc/pacman.conf, line 60: invalid value for 'ParallelDownloads' : '2.5' error parsing '/etc/pacman.conf' or pacman -Syu aborting with the entirely more cryptic: warning: config file /etc/pacman.conf, line 59: invalid value for 'ParallelDownloads' : '2.5' and this isn't just a problem for the newly added ParallelDownloads setting, either, you could get the same problem if you specified a broken XferCommand, but that's harder as it's more accepting of input and you probably don't hit this except with unbalanced quotes. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-11pacman-conf: fix incomplete support for ILoveCandyEli Schwartz
This was only partially implemented in the original implementation. `pacman-conf | grep ILoveCandy` would tell you if it was set, but querying directly by name would not. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-11pacman-conf: add support for new ParallelDownloads config optionEli Schwartz
This was forgotten in the initial implementation, so it was impossible to figure out the value from a script, or correctly roundtrip the config file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Swap alpm_db_update() implementation to multiplexed versionAnatol Pomozov
Now when all callers of the old alpm_db_update() function are gone we can remove this implementation. And then rename alpm_dbs_update() function to alpm_db_update(). Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Convert downloading databases to the new multiplexed APIAnatol Pomozov
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Convert download packages logic to multiplexed APIAnatol Pomozov
Create a list of dload_payloads and pass it to the new _alpm_multi_* interface. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Implement multibar UIAnatol Pomozov
Multiplexed download requires ability to draw UI for multiple active progress bars. To implement it we use ANSI codes to move cursor up/down and then redraw the required progress bar. `pacman_multibar_ui.active_downloads` field represents the list of active downloads that correspond to progress bars. `struct pacman_progress_bar` is a data structure for a progress bar. In some cases (e.g. database downloads) we want to keep progress bars in order. In some other cases (package downloads) we want to move completed items to the top of the screen. Function `multibar_move_completed_up` allows to configure such behavior. Per discussion in the maillist we do not want to show download progress for signature files. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Extend download callback interface with start/complete eventsAnatol Pomozov
With the previous download interface the callback uses the first progress event as 'download has started' signal. Unfortunately it does not work with up-to-date files that never receive 'download progress' events. Up-to-date database messages are currently handled in sync_syncdbs() after the sequential download is completed and a result from ALPM is received. But this is not going to work with multiplexed download interface that returns the result only after all files are completed. Another problem with 'first progress event is the beginning of the download' is that such events time are unpredictable. Thus the UI progress bar order might differ from what has been passed by client to alpm_dbs_update() function. We actually want to keep the dbs progress bars in a strict order. To help to solve the given problems extend the download callback to allow 2 more events - download started and completed. 'Download started' events appear in the same order as in the list given by a client. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Introduce event types for start/end database list downloadAnatol Pomozov
Multiplexed database/files downloads will use multiple progress bars. The UI logic is quite complicated and printing error messages while handling multiple progress bars is going to be challenging. Instead we are going to save all ALPM error messages to a list and flush it at the end of the download process. Use on_progress variable that blocks error messages printing. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Implement multiplexed download using mCURLAnatol Pomozov
curl_multi_download_internal() is the main loop that creates up to 'ParallelDownloads' easy curl handles, adds them to mcurl and then performs curl execution. This is when the paralled downloads happens. Once any of the downloads complete the function checks its result. In case if the download fails it initiates retry with the next server from payload->servers list. At the download completion all the payload resources are cleaned up. curl_multi_check_finished_download() is essentially refactored version of curl_download_internal() adopted for multi_curl. Once mcurl porting is complete curl_download_internal() will be removed. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Implement _alpm_multi_downloadAnatol Pomozov
It is an equivalent of _alpm_download but accepts a list of payloads. curl_multi_download_internal() is a stub at this moment and will be implemented in the later commits of this patch series. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Inline dload_payload->curlerr field into a local variableAnatol Pomozov
dload_payload->curlerr is a field that is used inside curl_download_internal() function only. It can be converted to a local variable. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Add multi_curl handle to ALPM global contextAnatol Pomozov
To be able to run multiple download in parallel efficiently we need to use curl_multi interface [1]. It introduces a set of APIs over new type of handler 'CURLM'. Create CURLM object at the application start and set it to global ALPM context. The 'single-download' CURL handle moves to payload struct. A new CURL handle is created for each payload with intention to be processed by CURLM. Note that curl_download_internal() is not ported to CURLM interface due to the fact that the function will go away soon. [1] https://curl.haxx.se/libcurl/c/libcurl-multi.html Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Introduce alpm_dbs_update() function for parallel db updatesAnatol Pomozov
This is an equivalent of alpm_db_update but for multiplexed (parallel) download. The difference is that this function accepts list of databases to update. And then ALPM internals download it in parallel if possible. Add a stub for _alpm_multi_download the function that will do parallel payloads downloads in the future. Introduce dload_payload->filepath field that contains url path to the file we download. It is like fileurl field but does not contain protocol/server part. The rationale for having this field is that with the curl multidownload the server retry logic is going to move to a curl callback. And the callback needs to be able to reconstruct the 'next' fileurl. One will be able to do it by getting the next server url from 'servers' list and then concat with filepath. Once the 'parallel download' refactoring is over 'fileurl' field will go away. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09Add config option to specify amount of parallel download streamsAnatol Pomozov
It includes pacman.conf new 'ParallelDownloads' option that specifies how many concurrent downloads cURL starts in parallel. Add alpm_option_set_parallel_downloads() ALPM function that allows to set this config option programmatically. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-09doc: remove vim modelines from BUILDINFO(5)Eli Schwartz
We (thought we) removed all modelines from the project in commit 860e4c4943ad062bd0eff99f28e7d64804b3c08e, but apparently this one sneaked in by virtue of this manpage being added to the project after the "remove all the modelines" patch was submitted, but before it was applied. I must have failed to update the patch to remove it from this file also. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-06editorconfig: set meson indentation styleEli Schwartz
meson.build gets two-space indents, but our global tabbed default was overriding this. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-06meson: use better check for debug buildsEli Schwartz
meson 0.48 added the 'debug' and 'optimization' builtin options, which bidirectionally map to the buildtype, but in some cases where debug is enabled, the builtype may be custom. Checking the 'debug' option lets us detect every case currently detected, plus a few more, and does so in a shorter and more concise manner. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-06Convert gitlab valgrind runner to mesonAllan McRae
Turns out environmental variables do get passed through fakechroot! Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-05meson: handle XFAIL tests outside of TAPDave Reisner
This change causes expected fail tests to actually fail by eliding the '# TODO' from the test plan. In turn, we can now properly use 'should_fail' in the meson test() rule and see these expected fail tests in the output: Before: ... 320/332 upgrade077.py OK 0.12679290771484375 s 321/332 upgrade078.py OK 0.12620115280151367 s 322/332 upgrade080.py OK 0.1252129077911377 s ... Ok: 332 Expected Fail: 0 Fail: 0 Unexpected Pass: 0 Skipped: 0 Timeout: 0 After: ... 320/332 upgrade077.py OK 0.12679290771484375 s 321/332 upgrade078.py EXPECTEDFAIL0.12620115280151367 s 322/332 upgrade080.py OK 0.1252129077911377 s ... Ok: 326 Expected Fail: 6 Fail: 0 Unexpected Pass: 0 Skipped: 0 Timeout: 0 Signed-off-by: Allan McRae <allan@archlinux.org>
2020-05-05Add Gitlab Runner configurationAllan McRae
Arch Linux is setting up a Gitlab instance. This adds CI for the pacman project, testing a range of configurations on Arch and basic builds on Fedora and Debian. Note that asciidoc is specifically not installed on the Debian run because it is all sorts of broken... Also, the defaults have been set to meson, with two autotools tests that will soon be removed. Original-file from: Andrew Gregory <andrew.gregory.8@gmail.com> Altered-to-run-on-Arch-Gitlab by: Sven-Hendrik Haase <svenstaro@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2020-04-29Add NoProgressbar to pacman.conf optionsIvy Foster
This is useful for dumb terminals that do not support escape sequences. Signed-off-by: Ivy Foster <escondida@iff.ink> Signed-off-by: Allan McRae <allan@archlinux.org>