| Age | Commit message (Collapse) | Author |
|---|
|
This removes support for autotools in favour of meson.
|
|
While iterating over the provides array, the find call for locating a
shared library may result in listing multiple entries which by itself
does not produce a stable deterministic order and may vary depending on
the underlying filesystem.
To provide a stable listing and a reproducible .PKGINFO file the result
of find is piped to sort with a static LC_ALL=C localisation.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is not a warning, _parse_options() returns failure without even
parsing further lines and the attempted pacman/pacman-conf program
execution immediately aborts. Warnings are for when e.g. later on if we
don't recognize a setting at all, we skip over it and have enough
confidence in this to continue executing the program.
The current implementation results in pacman-conf aborting with:
warning: config file /etc/pacman.conf, line 60: invalid value for 'ParallelDownloads' : '2.5'
error parsing '/etc/pacman.conf'
or pacman -Syu aborting with the entirely more cryptic:
warning: config file /etc/pacman.conf, line 59: invalid value for 'ParallelDownloads' : '2.5'
and this isn't just a problem for the newly added ParallelDownloads
setting, either, you could get the same problem if you specified a
broken XferCommand, but that's harder as it's more accepting of input
and you probably don't hit this except with unbalanced quotes.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was only partially implemented in the original implementation.
`pacman-conf | grep ILoveCandy` would tell you if it was set, but
querying directly by name would not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was forgotten in the initial implementation, so it was impossible
to figure out the value from a script, or correctly roundtrip the
config file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now when all callers of the old alpm_db_update() function are gone we can
remove this implementation. And then rename alpm_dbs_update() function to
alpm_db_update().
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Create a list of dload_payloads and pass it to the new _alpm_multi_*
interface.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed download requires ability to draw UI for multiple active progress
bars. To implement it we use ANSI codes to move cursor up/down and then
redraw the required progress bar.
`pacman_multibar_ui.active_downloads` field represents the list of active
downloads that correspond to progress bars.
`struct pacman_progress_bar` is a data structure for a progress bar.
In some cases (e.g. database downloads) we want to keep progress bars in order.
In some other cases (package downloads) we want to move completed items to the
top of the screen. Function `multibar_move_completed_up` allows to configure
such behavior.
Per discussion in the maillist we do not want to show download progress for
signature files.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the previous download interface the callback uses the first progress
event as 'download has started' signal. Unfortunately it does not work with
up-to-date files that never receive 'download progress' events.
Up-to-date database messages are currently handled in sync_syncdbs()
after the sequential download is completed and a result from ALPM is
received. But this is not going to work with multiplexed download
interface that returns the result only after all files are completed.
Another problem with 'first progress event is the beginning of the
download' is that such events time are unpredictable. Thus the UI progress
bar order might differ from what has been passed by client to
alpm_dbs_update() function. We actually want to keep the dbs progress bars
in a strict order.
To help to solve the given problems extend the download callback to
allow 2 more events - download started and completed. 'Download started'
events appear in the same order as in the list given by a client.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed database/files downloads will use multiple progress bars.
The UI logic is quite complicated and printing error messages while
handling multiple progress bars is going to be challenging.
Instead we are going to save all ALPM error messages to a list and flush
it at the end of the download process. Use on_progress variable that
blocks error messages printing.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
curl_multi_download_internal() is the main loop that creates up to
'ParallelDownloads' easy curl handles, adds them to mcurl and then
performs curl execution. This is when the paralled downloads happens.
Once any of the downloads complete the function checks its result.
In case if the download fails it initiates retry with the next server
from payload->servers list. At the download completion all the payload
resources are cleaned up.
curl_multi_check_finished_download() is essentially refactored version of
curl_download_internal() adopted for multi_curl. Once mcurl porting is
complete curl_download_internal() will be removed.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It is an equivalent of _alpm_download but accepts a list of payloads.
curl_multi_download_internal() is a stub at this moment and will be
implemented in the later commits of this patch series.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
dload_payload->curlerr is a field that is used inside
curl_download_internal() function only. It can be converted to a local
variable.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
To be able to run multiple download in parallel efficiently we need to
use curl_multi interface [1]. It introduces a set of APIs over new type
of handler 'CURLM'.
Create CURLM object at the application start and set it to global ALPM
context.
The 'single-download' CURL handle moves to payload struct. A new CURL
handle is created for each payload with intention to be processed by CURLM.
Note that curl_download_internal() is not ported to CURLM interface due
to the fact that the function will go away soon.
[1] https://curl.haxx.se/libcurl/c/libcurl-multi.html
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is an equivalent of alpm_db_update but for multiplexed (parallel)
download. The difference is that this function accepts list of
databases to update. And then ALPM internals download it in parallel if
possible.
Add a stub for _alpm_multi_download the function that will do parallel
payloads downloads in the future.
Introduce dload_payload->filepath field that contains url path to the
file we download. It is like fileurl field but does not contain
protocol/server part. The rationale for having this field is that with
the curl multidownload the server retry logic is going to move to a curl
callback. And the callback needs to be able to reconstruct the 'next'
fileurl. One will be able to do it by getting the next server url from
'servers' list and then concat with filepath. Once the 'parallel download'
refactoring is over 'fileurl' field will go away.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It includes pacman.conf new 'ParallelDownloads' option that
specifies how many concurrent downloads cURL starts in parallel.
Add alpm_option_set_parallel_downloads() ALPM function that
allows to set this config option programmatically.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We (thought we) removed all modelines from the project in commit
860e4c4943ad062bd0eff99f28e7d64804b3c08e, but apparently this one
sneaked in by virtue of this manpage being added to the project after
the "remove all the modelines" patch was submitted, but before it was
applied.
I must have failed to update the patch to remove it from this file also.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
meson.build gets two-space indents, but our global tabbed default was
overriding this.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
meson 0.48 added the 'debug' and 'optimization' builtin options, which
bidirectionally map to the buildtype, but in some cases where debug is
enabled, the builtype may be custom. Checking the 'debug' option lets us
detect every case currently detected, plus a few more, and does so in a
shorter and more concise manner.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Turns out environmental variables do get passed through fakechroot!
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This change causes expected fail tests to actually fail by eliding the
'# TODO' from the test plan. In turn, we can now properly use
'should_fail' in the meson test() rule and see these expected fail
tests in the output:
Before:
...
320/332 upgrade077.py OK 0.12679290771484375 s
321/332 upgrade078.py OK 0.12620115280151367 s
322/332 upgrade080.py OK 0.1252129077911377 s
...
Ok: 332
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
After:
...
320/332 upgrade077.py OK 0.12679290771484375 s
321/332 upgrade078.py EXPECTEDFAIL0.12620115280151367 s
322/332 upgrade080.py OK 0.1252129077911377 s
...
Ok: 326
Expected Fail: 6
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Arch Linux is setting up a Gitlab instance. This adds CI for the pacman
project, testing a range of configurations on Arch and basic builds on
Fedora and Debian.
Note that asciidoc is specifically not installed on the Debian run because
it is all sorts of broken... Also, the defaults have been set to meson, with
two autotools tests that will soon be removed.
Original-file from: Andrew Gregory <andrew.gregory.8@gmail.com>
Altered-to-run-on-Arch-Gitlab by: Sven-Hendrik Haase <svenstaro@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is useful for dumb terminals that do not support escape
sequences.
Signed-off-by: Ivy Foster <escondida@iff.ink>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Version colour numbers are dulled in the non-verbose transaction summary
when colours are enabled.
To prevent a regression, this patch also adds handling of strings with
ANSI codes to string_length as to not break the transaction summary's
output functions when colour codes are in the package name strings.
Signed-off-by: Carson Black <uhhadd@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The GOTO_ERR define was added in commit 80ae8014 for use in future commits.
There are plenty of places in the code base it can be used, so convert them.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use STRDUP() over strdup() to catch memory allocation errors.
There are still some instances of strdup left, but these are in functions
that currently have no error path and would require a larger rework.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
realloc can fail just like the other memory allocation functions. Add a
macro to simplify handling of realloc failures, similar to the already
existing MALLOC, CALLOC, etc.
Replace the existing realloc uses with the new macro, allowing us to
move tedious error handling to the macro. Also, in be_package and
be_sync, this fixes hypothetical memory leaks (and thereafter null
pointer dereferences) in case realloc fails to shrink the allocated
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Current code accidently uses noupgrade for the NoExtract directive.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use ASCII control codes to hide cursor at the pacman start and then
show the cursor when pacman finishes.
It helps to avoid annoying blinking when progress bars are re-drawn.
Cursor is reenabled if pacman expects user's input.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Following the example of the recently added GOTO_ERR, adding the file and
line number in addition to the function name in our debug messages is
potentially useful.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is a macro similar to RET_ERR but useful in the case when we need
to record an error and then jump to some cleanup section.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since commit 2ee7a8d8, there is no cleanup needed in this function. Just
return instead of jumping to the cleanup label.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
'output' is a list of messages that pacman received but delayed printing
to avoid messing with UI.
Such functionality is useful for the upcoming multi-line progress bar
UI. Let's move it to a separate function.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
One reason why the function returns an error is some repo
does not have any servers.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently, download_files() creates payloads for all packages then
iterates over them, calling download_single_file. This can be
simplified by looping over packages and constructing the payload as needed.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When pacman fails to satisfy deps, we might see output like the
following:
==> Making package: spiderfoot 3.0-1 (Thu 06 Feb 2020 12:45:10 PM CET)
==> Checking runtime dependencies...
==> Installing missing dependencies...
error: target not found: python-pygexf
==> ERROR: 'pacman' failed to install missing dependencies.
==> Missing dependencies:
-> python-dnspython
-> python-exifread
-> python-cherrypy
-> python-beautifulsoup4
-> python-netaddr
-> python-pysocks
-> python-ipwhois
-> python-ipaddress
-> python-phonenumbers
-> python-pypdf2
-> python-stem
-> python-whois
-> python-future
-> python-pyopenssl
-> python-docx
-> python-pptx
-> python-networkx
-> python-cryptography
-> python-secure
-> python-pygexf
-> python-adblockparser
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
This is misleading -- the only truly missing package is python-pygexf,
but we fail to remove sync-able deps from our deplist and report
everything as if it were missing. Simply drop this extra reporting
because pacman already tells us exactly what couldn't be resolved.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Improve discoverability of the alpm-hooks man page by adding a pacman-hooks
symlink.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Current flow looks like
loop dbs_sync {
loop pkgs {
if pkg.db == db then process(pkg, db)
}
}
Package sync transaction always has a counterpart in the dbs_sync list
(I cannot come up with a use-case when it is not true). So the loop can
be simplified to:
loop pkgs {
process(pkg, pkg.db)
}
Tested: 'ninja test' & manually by using pacman with this patch for a
week
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
libalpm: move docs from .c files into alpm.h And fix/expand some
along the way.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It looks like this function has never actually worked. The current list
is never set to NULL after being freed. So the new deps were just
appended to the already freed list, leading to a segfault.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checksums arrays should be filled with values provided by upstream. We
currently have md5 set as an unsecure default, and are constantly asked to
change it to sha2. However, just changing the default to a stronger checksum
gives the user the impression that "makepkg -g" checksums are perfect.
Instead, change the default checksum to a CRC, to make it clear that any
checksum generated purely by "makepkg -g" is not ideal.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Generating checksums with "makepkg -g" only determines that the user of a
PKGBUILD has the same file as the packager (assuming no collision). This
means an upstream source could be maliciously changed and passed on as valid
by a PKGBUILD. To avoid this, it is essential that any checksums used in
a PKGBUILD are as provided by upstream.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit e6a6d307 detected complete part files by comparing a payload's
max_size to initial_size. However, these values are also equal when we
use pacman -U on a URL as max_size is set to 0 in that case. Add a further
condition to avoid that.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extracting function variables containing arbitrarily scoped variables of
arbitrary nature is a disaster, but let's at least cover the common case
of using the actual '$pkgname' in an install/changelog file. It's the
odd case of actually being basically justified use of disambiguating
between the same variable used in multiple different split packages...
and also, --printsrcinfo already uses and overwrites the variable
'pkgname' in pkgbuild_extract_to_srcinfo, so this "works" in .SRCINFO
but doesn't work in .src.tar.gz
It doesn't work in lint_pkgbuild either, but in that case the problem is
being too permissive, not too restrictive -- we might end up checking
the same file twice, and printing that it is missing twice.
Fixes FS#64932
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We previously has the maximum database size as 25MB. This was set in the days
before repos had as many packages as they do now, and before we started
distributing files databases. Increase this limit to 128MB.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Many moons ago, libtool was bad - I mean worse than today! It gobbled all
--as-needed and we ended up with an overlinked libalpm. This was annoying,
particularly when dealing with soname bumps in libraries pacman/libalpm had
no business linking to. Luckily we had a fix, stolen from GNOME I believe.
And with that fix, we lived in harmony with libtool for many years. Until one
day, unbeknownst to us, libtool was "fixed". We kept applying our patch,
because it still applied, but it did worse than nothing. It gobbled up our
other LDFLAGS, and our libalpm started missing out on RELRO and BIND_NOW.
This made the Arch Security Team unhappy. We will make them happy again by
stopping the patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|