| Age | Commit message (Collapse) | Author |
|---|
|
Both currently marked as failing.
* sync303.py encapsulates the broken behavior reported in FS#27214.
* sync304.py shows how packages depending on a specific version of a
package in SyncFirst can cause breakage of the dependency resolver.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some late-arriving translation updates and add the correct dates to the
index.txt releases table.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We do this in several of the package duplication steps; add a helper
function for doing so to reduce some of the repetitive code.
Also add a free_deplist function for our repeated depend list free calls
of both the data and the list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Made existing documentation more consistent and added
documentation where there was none. One function still
needs documentation and is marked with 'TODO'.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: const pointers, don't worry about bitfields.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This addresses a short but sweet race condition currently existing in
repo-add and repo-remove. We do the smart thing and zip the database to
a location in a temporary directory and not over the original database
directly. However, we then proceed to move this file directly from the
temporary directory to our final location, which is more than likely a
cross-filesystem move (/tmp on tmpfs) and thus non-atomic.
Instead, zip the file to the same directory, prefixing the filename with
'.tmp.'. We then move the file into place. This move is guaranteed to be
atomic, so any reader of the database file will get either the old
version, the new version, or ENOENT.
We also perform a hardlink if possible instead of a move when shifting
the old database out of the way to '.old'; this ensures there is no
chance of a database file not existing during the whole process.
Only one small race condition should now be present- when the database
has been fully moved into place and the signature has not, you may see a
mismatch. There seems to be no good way to address this, and it existed
before this patch.
A final note- if someone had locked-down permissions on the directory
that the database files are in (e.g., could only write to foo.db.tar.gz,
foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would
break.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Given our semi-frequent use of pushd/popd, if we are in any directory
but the original and the database path given was relative, we won't
unlock the database file when cleaning up after an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to pkgver, pkgrel, and epoch and ensures that any trailing
whitespace outside of the context of the variable declaration itself is
properly trimmed. The Bash parser will ignore this, and so should we.
We don't need to worry about leading space because it would force a
syntax error, or fail validation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This moves the common setup code of about 5 different callers into one
method. Error messages will now be common and shared in all places;
several paths did not have any messages at all before.
In addition, we now pick an ideal block size for the archive read based
off the larger value of our default buffer size or the st.st_blksize
field. For a filesystem such as NFS, this is often much larger than the
default 8192- values such as 32768 and 131072 are common.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#26806.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When doing a bare -U operation on a local package that doesn't pull in
any dependencies from the sync databases, we can get away with missing
database files. This makes the check conditional on no sync targets
found in the target list. This is not the prettiest code here so we have
a bit of hackish behavior required to straighten both the behavior and
the nonsensical error message out.
Addresses FS#26899.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit e7b56f48 allowed makepkg to handle pgp signatures with the
.sign extension. Update the man page to reflect this.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is consistent with the other enums and structs, and should be
slightly more readable.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Adds test remove031.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is a simple change that allows comparions to be more in line with
how other checks are done. It will be necessary for ensuing patchwork
that implements fnmatch for comparing and assumes a specific argument
ordering.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allan's original message: Occasionally when the download rate showed
100.0 the output got messed up. This was caused by the rounding of a
number between 99.95 and 100. Adjust the threshold to avoid this
rounding issue.
Dan: make this fix, but also show values between 0 and 9.995 with two
decimal places since we have the room.
Original-fix-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The point of this early compare to NULL byte check was so we could bail
early and skip the strcmp() call. Given we weren't doing the check
right, this never exited early. Fix it to work as intended.
Noticed-by: Pepe Juárez <trulustapa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a trivial operation that doesn't require calling a function over
and over- just do some math and indexing into a character array.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gives us a bit more control and over the archive reading process,
and a bit less is done behind the scenes. It also allows us to use
fstat() in preference to stat(), which should avoid some potential race
conditions.
Some reorganization is necessary to move the stat calls after the open()
calls. Error handling and cleanup in general is also improved, as we had
several potential memory and file handle leaks before in some error
paths.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This removes an unnecessary level of buffering. We are not doing
line-based I/O here, so we can read in blocks of 8K at a time directly
from the file.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These wrap the normal open() and close() low-level I/O calls and ensure
EINTR is handled correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This seems to fix FS#26652.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Replacing the strdup when after the first NULL check assures that we get
continue with payload->remote_name defined.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Dan: fix mask calculation, add it to the success/fail block instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This takes the place of three previously used constants:
ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE.
In libarchive 3.0, the first constant will be no more, so we can ensure
we are forward-compatible by removing our usage of it now. The rest are
unified for consistency.
By default, we will use the value of BUFSIZ provided by <stdio.h>, which
is 8192 on Linux. If that is undefined, a default value is provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Doesn't do a whole lot of good to compare against values that are never
set. Fixes bug where -vvv output wasn't grouping packages together
properly.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
There aretwo seperate issues in the same block of file conflict
checking code here:
1) If realpath errored, such as when a symlink was broken, we would call
'continue' rather than simply exit this particular method of
resolution. This was likely just a copy-paste mistake as the previous
resolving steps all use loops where continue makes sense. Refactor
the check so we only proceed if realpath is successful, and continue
with the rest of the checks either way.
2) The real problem this code was trying to solve was canonicalizing
path component (e.g., directory) symlinks. The final component, if
not a directory, should not be handled at all in this loop. Add a
!S_ISLNK() condition to the loop so we only call this for real files.
There are few other small cleanups to the debug messages that I made
while debugging this problem- we don't need to keep printing the file
name, and ensure every block that sets resolved_conflict to true prints
a debug message so we know how it was resolved.
This fixes the expected failures from symlink010.py and symlink011.py,
while still ensuring the fix for fileconflict007.py works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These should all prevent installation, and yet two of the three tests
currently fail. Not good.
The best way to see what is going on here is to diff the three new tests
side by side- there is only a small difference between the three tests,
and that is in the destination of the symlink in question that should
never be overwritten.
symlink010.py: myprogsuffix -> myprog
symlink011.py: myprogsuffix -> broken
symlink012.py: myprogsuffix -> otherprog
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is some pecular behavior going on here when a package is loaded
that has no files, as is very common in our test suite. When we enter
the realloc/sort code, a package without files will call the following:
files = realloc(NULL, 0);
One would assume this is a no-op, returning a NULL pointer, but that is
not the case and valgrind later reports we are leaking memory. Fix the
whole thing by skipping the reallocation and sort steps if the pointer
is NULL, as we have nothing to do.
Note that the package still gets marked as 'files loaded', becuase
although there were none, we tried and were successful.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
First, use fstat() in preference to stat() since we already have an open
file handle. This also removes the need to check for a symlink as that
is not possible when a file is opened.
Next, use archive_entry_mode() rather than archive_entry_stat() as we
only use the mode portion of the stat struct and the call is much
cheaper. Also delay it until it is necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|