Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-19Fix build error when SIGPOLL is not availableMark Weiman
On Linux, SIGPOLL is a valid signal, but on systems like FreeBSD, it is not. This patch does a preprocessor check to see if SIGPOLL is available or not. Signed-off-by: Mark Weiman <mark.weiman@markzz.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-19Add an include for signal.h when neededMark Weiman
On Linux, signal.h is not required to have access to the signal constants. On FreeBSD, this is not the case and requires signal.h to be explicitly included. This patch adds an include for signal.h in any source file that uses it. Signed-off-by: Mark Weiman <mark.weiman@markzz.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-19meson.build: Fix detection of symbolsMark Weiman
This patch changes the behavior of meson to define configuration options *only* when the symbol checked is present. Currently, it defines all of them in config.h whether the symbol exists or not and the code that looks for it doesn't check the macro's value, but whether it's defined. Signed-off-by: Mark Weiman <mark.weiman@markzz.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-08Update urls to not use www. for archlinux.orgJelle van der Waa
www.archlinux.org now redirects to archlinux.org. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-08test: update mailing list urlJelle van der Waa
The Arch Linux mailing lists are these days served from the lists subdomain. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-07makepkg: add PACMAN_AUTH configurable setting for sudo elevationEli Schwartz
If specified, this will be used no matter what. If not, then we check if sudo exists and use that, or else fall back on su. Implements FS#32621 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-07ensure tests are parsed as TAP since they are, in fact, TAPEli Schwartz
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-07makepkg: fix the use of spaces in the localname:: component of sourcesEli Schwartz
Broken via refactoring in commit aa6fe1160b39cd364a6595b7c9f56acb1cea3432 but for obvious reasons only one person in the last 9 years has ever actually tried to do this. Still, it's technically correct to allow it. Fixes FS#70254 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-07include retries and signatures in download countAndrew Gregory
Fixes: FS#69881 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-04-07skip servers with too many errorsAndrew Gregory
Keep track of errors from servers so that bad ones can be skipped once a threshold is reached. Key the error tracking off the hostname because hosts may serve multiple repos under different url's and errors are likely to be host-wide. Implements: FS#29293. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-27libmakepkg: fix detection of source file names for debug packagesAllan McRae
The current gcc build from git master give different output from readelf: gcc-10.2.0 $ readelf "hello" --debug-dump | grep hello <11> DW_AT_name : (indirect string, offset: 0xbfc): hello.cpp gcc-git $ readelf "hello" --debug-dump | grep hello <12> DW_AT_name : (indirect line string, offset: 0x0): hello.cpp This causes the awk statement extracting the file name to fail as it relied on the information being in the 8th field. Instead, extract the information from the final field. Fixes FS#70168 Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-25Remove "total download" callback in favor of generic event callbackAnatol Pomozov
Total download callback called right before packages start downloaded. But we already have an event for such event (ALPM_EVENT_PKG_RETRIEVE_START) and it is naturally to use the event to pass information about expected download size. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-25remove sed command lookup and hardcoding in edit-script.shEli Schwartz
We should not need to hardcode the path to sed as we simply don't care. We don't check what kind of sed we found, and we're using the same one we initially found on the PATH, which is surely still on the PATH. At one point we did care to find the system copy of sed and hardcode it in makepkg, because we also passed non-portable -i options to it and makepkg needed to continue working on macOS even if some incompatible GNU sed got installed afterward, elsewhere on the PATH. But this was never relevant to the in-tree buildsystem script running sed. In commit 3a814ee6bca9ee24a868c0dc032b321048a53e08 we removed even that, so we don't need to look it up at all. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-06fix syntax error when running pacman-key --helpEli Schwartz
In commit 0f75ab3224141a5e8a4fe72b48b4639c83c6316b some unbalanced quotes were added by the committer while editing an error message. Fixes FS#69865 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-03Strip LTO symbols from distributed .a/.o filesAllan McRae
GCC's LTO implementation emits bytecodes into .o files it generates. These bytecodes are _not_ considered stable from one release of GCC to the next. There we need to strip the LTO bytecode out of any .o (and .a) file that gets installed into the package. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-03Add link time optimization support to makepkgAllan McRae
Add the 'lto' option to enable building with link time optimization by adding '-flto' to both CFLAGS and CXXFLAGS. The 'lto' option can be specificed both in the PKGBUILD or by setting the default in makepkg.conf. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-03-01Update copyright yearAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-24pacman-key: --refresh-keys queries WKD before keyserverMorten Linderud
With the recent outages of the keyservers there is a possibility of `--refresh-keys` failing to fetch new keys. A lot of current key distribution is done over WKD these days, and `pacman-key` has the ability to use it for `--recv-key`. There was a hope `gpg` would end up supporting WKD for the refresh functionality, but this seems to be limited to expired keys fetched through WKD. Since this functionality isn't yet available it makes sense to stuff it into `pacman-key`. The current implementation looks over all available keyids in the keyring, attempts to fetch over WKD and then fall backs to keyservers if no email has a valid WKD available. The downside of this approach is that it takes a bit longer to refresh the keys, but it should be more robust as the distribution should be providing their own WKDs. Co-authored-by: Jonas Witschel <diabonas@archlinux.org> Signed-off-by: Morten Linderud <morten@linderud.pw> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-24libmakepkg: Support zstd decompression for sourcesMorten Linderud
This enables us to extract files in the source array and ensures that we can decompress files if the uncompressed signature is served. Signed-off-by: Morten Linderud <morten@linderud.pw> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08Revert "ci: cache packages"Emil Velikov
This reverts commit e348ba38814c9cc7c1c9892d0451096234dc39ab. With the above commit we started caching the downloaded packages. Based on some testing and, it saves ~30s in the "step_script" stage while adding 18s for "Restoring/Saving cache". A net saving of ~10s. With earlier commit, we no longer use an ancient image which also pulls base-devel - thus the packages we have to download is minimal. Now comparing the uncached "step_script", vs the cached one - it is slowed by 2-3 seconds (1:01 -> 1:03), while we eliminate the 18s (and growing) caching. Tl:Dr: With up-to date image, package caching in not worth it - be that time, disk or network wise. Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08ci: use official imageEmil Velikov
The archlinux/base have been deprecated. Since we depend on base-devel simply use archlinux:base-devel Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08makepkg: Don't double-layer distcc on ccacheMatti Niemenmaa
buildenv is set once for build() and a second time for package(). When using both distcc and ccache, this lead to CCACHE_PREFIX="distcc distcc" in package(), which breaks PKGBUILDs that execute the compiler in package() because distcc complains: distcc[383041] (main) CRITICAL! distcc seems to have invoked itself recursively! Avoid causing this error by only adding "distcc" to CCACHE_PREFIX if it's not yet there. Signed-off-by: Matti Niemenmaa <matti.niemenmaa+git@iki.fi> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08doxygen: fix missing parameter nameEli Schwartz
This was raising a warning during the build. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08support xattr when extracting packagesEli Schwartz
This permits storing the result of setcap during package() and applying the resulting capabilities to the installed program. Formerly, it was necessary to edit the binary after the fact (and thus dirty the file according to -Qkk) by using an install scriptlet. One problem that needs to be solved before this is useful, is preventing the strip routine from destroying xattrs. This is taken care of in the previous patch. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-02-08makepkg: don't let the strip routine mess up file attributesEli Schwartz
It updates the stripped/objcopied file by creating a temp file, chown/chmodding it, and replacing the original file. But upstream binutils has CVE-worthy issues with this if running strip as root, and some recent versions of strip don't play nicely with fakeroot. Also, this has always destroyed xattrs. :/ Sidestep the issue by telling strip/objcopy to write to a temporary file, and manually dump the contents of that back into the original binary. Since the original binary is intact, albeit with different contents, it retains its correct attributes in fakeroot. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21libalpm: fix total download reporting wrong totalmorganamilo
When a package does not need to be downloaded but a signature does, total download didn't count that towards the total. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21add --upgrade download testsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21pmtest: add ability to spawn simple http serversAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21pmdb: add option to skip populating file:// serverAndrew Gregory
Populating a file:// Server prevents any manually registered HTTP servers from ever being used. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21add CACHE_FEXISTS and CACHE_FCONTENTS test rulesAndrew Gregory
The existing CACHE_EXISTS rule takes a package, which is not suitable for -U tests that need to be able to check for specific files. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21gitlab-ci: print output and logs for failed testsAndrew Gregory
Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21pactest.py: read options from PACTEST_OPTSAndrew Gregory
Makes it easier to pass options when not running pactest directly. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21pacman: add -w to -UAndrew Gregory
Mostly for testing. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-21pacman: correct length of ".files.sig" stringPascal Ernster
Running "pacman -Sc" deletes /var/lib/pacman/sync/*.files.sig due to a wrong string length being used when checking filename suffixes in that directory. In turn, these missing signature files cause both the corresponding "*.files" files and their signatures being forcibly re-downloaded again when "pacman -Sy" is executed. Since official Arch Linux repos don't use signed database files yet, this only affects people who use custom repos with signed database files, for which they have set the "SigLevel" directive to "Required" or "DatabaseRequired" in /etc/pacman.conf. Fixes FS#66472 Signed-off-by: Pascal Ernster <pacman-dev@hardfalcon.net> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19do not try to download an empty db listAndrew Gregory
Starting the download process, even if there is nothing to actually download, causes an error when pacman is built without curl and has no XferCommand defined (like our test suite). Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19make alpm download config accessible without curlAndrew Gregory
Download-related config options are currently limited to builds with curl. This causes compilation errors when those options are used without an appropriate guard which often goes unnoticed because we all use curl. Front-ends providing their own download callback may also want to use these settings. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19sighandler: initialize sigaction fieldsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19fully free error list in check_keyringAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19plug memory leaks in _alpm_key_importAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19pacman-conf: free rootdir before replacingAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-19pacman: indicate --overwrite takes a globAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-11pacman-key: Close msg string in generate_master_keyMorten Linderud
In 19980a61e9ed9b9a57520aaa919c40a4b5311f87 there was a msg added which didn't get the string closed. Signed-off-by: Morten Linderud <morten@linderud.pw> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-11mailmap additionAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-11Read targets from stdin before chrootingmorganamilo
Operations involving --sysroot and reading targets from stdin were failing due to attempting to read targets after chrooting. Move the chroot to happen after targets are read. Fixes FS#68630 Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-11pacman: add file checksum validation against mtreeEmil Velikov
With libarchive v3.5.0 we have API to fetch the digest from the mtree. Use that to validate if the installed files are modified or not. As always, a modified backup file will trigger a warning but will not result in an actual failure. Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-11doc: move missed sections from alpm_ to libalpm_Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-09doc: reference all libalpm sections within libalpm man pageAllan McRae
Also, fix minor typo. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-09doc: rename libalpm-list man page for consistencyAllan McRae
All other libalpm man pages are in the form libalpm_<name>. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-09doc: change group names to libalpm_*morganamilo
Also change the group's title to point to the group's man page. This makes generated man pages be named libalpm_* which is more consistent with what library man pages are usually called. Signed-off-by: Allan McRae <allan@archlinux.org>
2021-01-09libalpm: const annotate struct db_operationsEmil Velikov
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.