Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-06Fix libfetch configure checkingDan McGee
I don't know what I tested in commit 3e7b90ff6950, but it definitely wasn't working as advertised. Fix the checks in the source code itself to match the right define (HAVE_LIBFETCH), as well as make sure the configure check defaults to looking for the library but not bailing if it could not be found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Merge branch 'maint'Dan McGee
2010-09-03libalpm Swedish translation updatev3.4.1Tobias Eriksson
Signed-off by: Tobias Eriksson <tobier@tobier.se> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Clean up libfetch checking in configureDan McGee
Model it after the new OpenSSL check, and have it be a bit more useful. If you do not explicitly pass a command line option, it will be linked if available but will not error out if it is missing. Also bump the version to that where connection caching was introduced as we use these new features in the codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02libalpm md5: use larger and dynamic bufferDan McGee
This gave at least a 10% improvement on a few tested platforms due to the reduced number of read calls from files when computing the md5sum. It really is just a precursor to another patch to come which is to use MD5 functions that do the job a lot better than anything we can do. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02German translation updatesMatthias Gorissen
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Small fixes to Kazakh translationBaurzhan Muftakhidinov
2010-09-01Merge branch 'maint'Dan McGee
2010-09-013.4.1 version bumpDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add new European Portuguese translationGaspar Santos
This is being checked in as 'pt' rather than 'pt_PT' as that is what Transifex seems to want, and it is also the dominant choice of packages already installed on my system when doing a count of the files located in the /usr/share/locale translation directories. Thanks for the new translation! Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add dir missing from autoclean.shDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Use pipe to create compressed package instead of an intermediate tar fileJürgen Hötzel
A pipe between tar and compression command is used. This improves performance by running tar and the compression command simultaneously. Using a pipe also reduces IO by not writing an intermediate tar file to disk. Signed-off-by: Juergen Hoetzel <juergen@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27redirect scriptlet stderr synchronously through alpmJonathan Conder
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well. For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and all callbacks in the child process have been replaced for thread-safety. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Merge branch 'maint'Dan McGee
2010-08-27makepkg: remove trailing quote mark in regexDan McGee
Regular expressions in bash should not be quoted. Glad this was in the documentation and I didn't have to go to #bash to ask... Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27pactest: add shell to fake root environmentJonathan Conder
Adds a shell to the fake root set up for pactests, which was not needed previously due to a bug (debian #582847) in fakechroot. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
2010-08-25Update Chinese translation甘露(Gan Lu)
Submitted through Transifex on 2010-07-02. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Merge branch 'maint'Dan McGee
2010-08-23makepkg: error out on empty optdepends entriesAllan McRae
If optdepends was defined with empty members, then makepkg would abort late in the package building process. Detect such cases in the check_sanity() function. Fix-provided-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23makepkg: use less local variables in check_sanityAllan McRae
Instead of declaring a new local variable for each loop in the check_sanity() function, just reuse $i. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: remove unnecessary variable presence checkAllan McRae
It is unnecessary to check for a variables existence before looping over it. Extracted from patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: clarify invalid backup entry errorsAllan McRae
"Invalid backup entry" was not a particular helpful error message, especially when it was due to the file not being in the final package. Clarify these two messages. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23PKGBUILD.5: document illegal variable contentsAndres P
Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: less code duplication in create_packageAndres P
Combine changelog and install file creation in create_package(). Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: use regex to match options for privilege escalationAllan McRae
Eases maintanence if we need to add further options in the future. Extracted from a patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23Fix some whitespace issuesAllan McRae
The combination of tabs and spaces is annoying in any editor that does not use a tab width of 2 spaces. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23fgets invocation cleanupDan McGee
From the fgets manpage: fgets() reads in at most one less than size characters from stream and stores them into the buffer pointed to by s. Reading stops after an EOF or a newline. If a newline is read, it is stored into the buffer. A '\0' is stored after the last character in the buffer. This means there is no need at all to do 'size - 1' math. Remove all of that and just use sizeof() for simplicity on the buffer we plan on reading into. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Update translation files for 3.4.1 freezeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Update NEWS for 3.4.1 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Add Slovak translationJozef Riha
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Enable libfetch connection cachingDan McGee
This will allow downloads to reuse connections if possible, which could make big differences on perceived FTP speed as the connection won't have to be reestablished each time. For the most part, HTTP requests wouldn't be using keep alive anyway so this won't have an effect there. I'm not enthused about having to do this with the library initialization, but there isn't a much better place due to the fact that the loop over databases occurs on the frontend and not the backend. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18repo-add: create relative DB symlinksDan McGee
As noted in FS#20498, if an absolute path is used for specifying the database when invoking repo-add, the symlink generated will point to the absolute path instead of being relative to the directory. Fix this for the two linking cases, but leave the copy untouched so that will still work. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18makepkg: add file to the list of needed utilitiesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18Updates for Polish translationsMateusz Herych
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18makepkg: check tput support before usingAllan McRae
Prevent makepkg aborting whe colors are enabled and the terminal does not support setting colors by tput. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-08makepkg: Allow creation of uncompressed packagesThomas Bächler
When performing local testing, it may be useful to add PKGEXT='.pkg.tar' to the PKGBUILD to save time, especially with big packages. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Use the plural features of gettextDan McGee
Gettext has this whole 'Plural-Form' thing that until now we haven't taken advantage of. Given that not all languages have the same plural form rules as English, take advantage of it by defining a new _n() macro which will normally define to ngettext(), and adjust a few messages as an example of how to use. There are surely other places where we do singular/plural logic without me having noticed, so further patches are welcome to fix those up too. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Merge branch 'maint'Dan McGee
2010-07-27Small fix to Kazakh translationBaurzhan Muftakhidinov
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27bash_completion: negate expression inside bracketsDave Reisner
Avoids letting the shell evaluate ! as something else (e.g. an alias). Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Fix compile error in certain casesDan McGee
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for umask and mkdir in this file. I hit this today: cc1: warnings being treated as errors util.c: In function ‘makepath’: util.c:128:2: error: implicit declaration of function ‘umask’ util.c:141:5: error: implicit declaration of function ‘mkdir’ make[2]: *** [util.o] Error 1 Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Mark sync_pkg and sync_target as static functionsDan McGee
We no longer use these anywhere outside of sync.c, so do the rename and add static to their definition to meet our coding standards. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Maintain a list of seen packages when installing a groupDan McGee
As reported in FS#20221, we don't always do the right thing when installing a group and using the --needed option. This was due to the code pulling packages based on what was already in the transaction's add list, but completely ignoring the fact that we may have already seen and skipped this same package in an earlier repository. Add a list to the private _alpm_sync_pkg() function that allows us to have this extra information so we don't mistakenly downgrade a package when using --needed. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Add two pactests for group and --needed interactionDan McGee
The first step for resolving FS#20221. sync023 is the case from the bug report; sync022 is already working fine but we have no tests at all that test the --needed option in any form. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Always treat PKGLIST as an array.Dave Reisner
Fixes repackaging issues when multiple package names are passed to the --pkg option. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Download sync db into DBPath/syncAllan McRae
The sync db should be stored in the sync/ folder. This cleans up DBPath to only have local/ and sync/ directories in it. A nice side effect is that the db are now in the right place so we can implement directly reading from them. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Remove DBEXT usageAllan McRae
With commit 5dffef78, the repo database always has a symlink of the form reponame.db. Use that filename and let libarchive determine the compression type. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Check return value of fgets callsAllan McRae
Prevents compiler warnings with -D_FORTIFY_SOURCE=2 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>