Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-20add key algo to import msgFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20change gpg import message to resemble gpg --list-keysFlorian Pritz
Dan: const pointers, don't worry about bitfields. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: add support for PACKAGER environment varPhillip Smith
Add support for overriding configuration in /etc/makepkg.conf and ~/.makepkg.conf by setting the environment variable PACKAGER similar to how SRCDEST and PKGDEST behave. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-20repo-add: Remove .tmp. prefix from outputAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-20repo-add: ensure database and signature files are always viewed in wholeDan McGee
This addresses a short but sweet race condition currently existing in repo-add and repo-remove. We do the smart thing and zip the database to a location in a temporary directory and not over the original database directly. However, we then proceed to move this file directly from the temporary directory to our final location, which is more than likely a cross-filesystem move (/tmp on tmpfs) and thus non-atomic. Instead, zip the file to the same directory, prefixing the filename with '.tmp.'. We then move the file into place. This move is guaranteed to be atomic, so any reader of the database file will get either the old version, the new version, or ENOENT. We also perform a hardlink if possible instead of a move when shifting the old database out of the way to '.old'; this ensures there is no chance of a database file not existing during the whole process. Only one small race condition should now be present- when the database has been fully moved into place and the signature has not, you may see a mismatch. There seems to be no good way to address this, and it existed before this patch. A final note- if someone had locked-down permissions on the directory that the database files are in (e.g., could only write to foo.db.tar.gz, foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would break. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20repo-add: ensure path to LOCKFILE is always absoluteDan McGee
Given our semi-frequent use of pushd/popd, if we are in any directory but the original and the database path given was relative, we won't unlock the database file when cleaning up after an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update alpm_errno_t type to non-enum versionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Merge branch 'maint'Dan McGee
2011-11-16Add helper method for creating and opening archive objectDan McGee
This moves the common setup code of about 5 different callers into one method. Error messages will now be common and shared in all places; several paths did not have any messages at all before. In addition, we now pick an ideal block size for the archive read based off the larger value of our default buffer size or the st.st_blksize field. For a filesystem such as NFS, this is often much larger than the default 8192- values such as 32768 and 131072 are common. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Allow sync_prepare to work in certain cases without sync databasesDan McGee
When doing a bare -U operation on a local package that doesn't pull in any dependencies from the sync databases, we can get away with missing database files. This makes the check conditional on no sync targets found in the target list. This is not the prettiest code here so we have a bit of hackish behavior required to straighten both the behavior and the nonsensical error message out. Addresses FS#26899. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Remove unnecessary casts in callback codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Update documentation regarding signature extensionsAllan McRae
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14create a typedef for enum _alpm_errno_tJonathan Conder
This is consistent with the other enums and structs, and should be slightly more readable. Signed-off-by: Jonathan Conder <jonno.conder@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Update translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Updates in preparation for 4.0.1 releaseDan McGee
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Merge branch 'maint'Dan McGee
2011-11-13add fnmatch support for HoldPkgDave Reisner
Adds test remove031. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-13add support for back end fnmatch'd optionsDave Reisner
This is work originally provided by Sascha Kruse on FS#20360 with only minor adjustments to the implementation. It's been expanded to cover: NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup. Adds tests ignore008, sync139, sync502, and sync503. Also satisfies FS#18988. Original-work-by: Sascha Kruse <knopwob@googlemail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-11invert iteration order for ignoregroupDave Reisner
This is a simple change that allows comparions to be more in line with how other checks are done. It will be necessary for ensuing patchwork that implements fnmatch for comparing and assumes a specific argument ordering. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07Merge branch 'maint'Dan McGee
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Fix thinko in _alpm_strip_newlineDan McGee
The point of this early compare to NULL byte check was so we could bail early and skip the strcmp() call. Given we weren't doing the check right, this never exited early. Fix it to work as intended. Noticed-by: Pepe Juárez <trulustapa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01libalpm/util: don't use sprintf to convert from bin to hexDan McGee
This is a trivial operation that doesn't require calling a function over and over- just do some math and indexing into a character array. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Fix size reported in CALLOC allocation failure messageDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Convert package and database archive reads to use file descriptorsDan McGee
This gives us a bit more control and over the archive reading process, and a bit less is done behind the scenes. It also allows us to use fstat() in preference to stat(), which should avoid some potential race conditions. Some reorganization is necessary to move the stat calls after the open() calls. Error handling and cleanup in general is also improved, as we had several potential memory and file handle leaks before in some error paths. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01libalpm/util: use low-level I/O for copyfile and checksum routinesDan McGee
This removes an unnecessary level of buffering. We are not doing line-based I/O here, so we can read in blocks of 8K at a time directly from the file. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Add OPEN() and CLOSE() util macrosDan McGee
These wrap the normal open() and close() low-level I/O calls and ensure EINTR is handled correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Merge branch 'maint'Dan McGee
2011-11-01src/util: link vercmp against .lo, not the .oDave Reisner
This seems to fix FS#26652. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27dload: remove redundant conditionalDave Reisner
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27dload: chmod tempfiles to respect umaskDave Reisner
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26paccache: add vim modelineDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-26paccache: ensure seen/seenarch vars are setDave Reisner
Doesn't do a whole lot of good to compare against values that are never set. Fixes bug where -vvv output wasn't grouping packages together properly. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-26Fix issues with replacing unowned symlinksDan McGee
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Add some unowned symlink replacement testsDan McGee
These should all prevent installation, and yet two of the three tests currently fail. Not good. The best way to see what is going on here is to diff the three new tests side by side- there is only a small difference between the three tests, and that is in the destination of the symlink in question that should never be overwritten. symlink010.py: myprogsuffix -> myprog symlink011.py: myprogsuffix -> broken symlink012.py: myprogsuffix -> otherprog Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26libalpm/util: two stat() related cleanupsDan McGee
First, use fstat() in preference to stat() since we already have an open file handle. This also removes the need to check for a symlink as that is not possible when a file is opened. Next, use archive_entry_mode() rather than archive_entry_stat() as we only use the mode portion of the stat struct and the call is much cheaper. Also delay it until it is necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Merge branch 'maint'Dan McGee
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Fix libtool detection of --as-needed flagAllan McRae
The fix for -Wl,--as-needed in commit b0f9477f assumes that --as-needed/--no-as-needed is the only option given in a -Wl line. However, it is perfectly valid to specify multiple flags comma separated after a single -Wl (e.g. the default LDFLAGS in Arch Linux makepkg.conf). Adjust the fix so it detect --as-needed in a more general context > readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l Before: 13 After: 5 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Update libtool filesAllan McRae
Update for libtool-2.4.2 while keeping the fix for --as-needed from commit b0f9477f. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Merge branch 'maint'Dan McGee
Conflicts: src/pacman/package.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Hide empty columns in table package list displayDan McGee
On -R operations, the "New Version" column is always empty, taking up space and not really showing the user anything valuable. The same is true on -S or -U operations for the "Old Version" column when packages are only being installed and not upgraded. Remove this column so we get a few screen columns back, especially now that we show repo/packagename style output. This also makes some adjustment to the padding logic. We no longer include padding in column widths but it is included in the total table width. We also ensure the last displayed column is always right aligned, even if this is not the actual rightmost column. Example output, before: $ sudo pacman -R eclipse checking dependencies... Targets (1): Name Old Version New Version Net Change eclipse 3.7-1 -194.02 MiB Total Removed Size: 194.02 MiB And after: $ sudo pacman -R eclipse checking dependencies... Targets (1): Name Old Version Net Change eclipse 3.7-1 -194.02 MiB Total Removed Size: 194.02 MiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21pacman: show repo name in download promptDave Reisner
This only applies to the VerbosePkgLists option. Lessens the deficiencies created by earlier work to separate download records by repository. Satisfies FS#26334. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>