| Age | Commit message (Collapse) | Author |
|---|
|
This will be the first thing printed when doing an upgrade. Currently
there is no output at all until we start resolving dependencies, which
can be a while in if specifying very large targets on the command line,
in which case it is nice to let the user know we are doing something.
Addresses FS#25822 in the most KISS way possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This simplifies the flow a bit, making the pipeline a little easier to
grok.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
find can do this all on its own and remain portable.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Correcting a typo, as this function will never output anything.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
- display associated warnings on same line as pass/fail msg, to be more
consistent with checksum verification output
- properly error on a revoked key (matching pacman's behavior)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This adjusts type usage to match POSIX provided types from
<sys/types.h> rather than assuming everything will fit in a long or
unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as
appropriate. These are affected the same way off_t is on 32 bit
platforms, where the types are extende to 64 bits if large file support
is enabled.
Because most numbers here are block counts, this isn't
near as pressing as using a 32-bit variable for file sizes where
anything over 2GiB can burn you; we likely can support files at least
512 but mainly 4096 times larger.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't need to keep track of how many files are in a package now that
said value is provided to us. It also makes more sense to use size_t
here for types rather than the (hopefully never too short) int.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Changes in commit dc3336c277 caused this to stop working as expected for
sync packages, due to the way the logic is structured. Ensure we always
enter the signature code if the bitflag is flipped on to check
signatures for packages. Rename 'use_sig' to 'has_sig' for clarity.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We seem to enjoy using bash regex capabilities, but never referencing
the result with BASH_REMATCH. Replace almost all regexes with equivalent
globs which are faster and functionally equivalent in these cases.
This enables the extglob shopt.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This works for both 32-bit and 64-bit platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Don't just set the flag variables to zero length strings, actually unset
them from the environment. This fixes issues with broken gnu Makefies
that use ?= for assigment, where the presence of a var is enough to make
this condition avoid assignment.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- Properly read each sorted line into a new array, instead of breaking
on every word.
- LC_COLLATE should apply to the sort portion of the pipeline, not the
printing.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This gives us some amount of room to grow in case we ever find another
reason that we might return with an error from the progress callback.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We lost some of this output in the fetch->curl conversion, but I also
noticed in FS#25852 that we just lack some of this useful information
along the way.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Dan: fix the other missing one too.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
_alpm_filecache_setup() destroys the list of cachedirs when it finds no
writeable directories in the config. This put us in an awkward situation
where _alpm_filecache_find() would locate a downloaded file in a r/o
cachedir, but then fail to install it after _alpm_filecache_setup() is
called (with a NULL argument). Change this behavior to merely prepend
the temporary directory to the list of available cachedirs.
Dan exposed it in e07547ee4ed4, as now a package can be found in a
directory we may not be able to actually store packages in.
Reported-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Neither deltas nor filename attributes are ever present in the local
database, so we can remove all of the indirection for accessing these
attributes.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The call to apply was tucked inside validate, and the EVENT callbacks
were done outside the function rather than inside. Reorganize things a
bit to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows new signatures to be pulled, revocations to be found, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This also renames '--receive' to '-recv-keys' to match the wrapped gpg
option name, rather than invent a new one, now that the calling
convention is the same.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using the mystical [<foobar>] options which is some sort of
cross between a <required> argument and an [optional] one. Remove this
madness and do some other general cleanup/consistency work in the
manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use '\--option' rather than `--option` everywhere.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We currently have csize, isize, and size concepts, and sometimes the
difference isn't clear. Ensure the following holds:
* size (aka csize): always the compressed size of the package; available
for everything except local packages (where it will return 0)
* isize: always the installed size of the package; available for all
three package types
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This removes the last usages of this rule that aren't explicitly looking
at real output from pacman. Notably, these tests depended on one
particular debug logger not ever being changed, which is too fragile,
not to mention doesn't work at all with --nolog.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will work fine on x86_64 (or any platform that has a 64 bit long),
but currently fails on i686. This test also stresses the recent changes
to accommodate package size values greater than a 32 bit UINT_MAX.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The regex wasn't rooted at the end of the filename, nor was it matching
a period/dot before the file extension. The end result was this matched a
file named '07_all_sig.patch' which is totally broken.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Call strlen earlier in the dl progress callback, and reuse this length
to replace some heavier str*() calls with more optimized mem*()
replacements. This also gets rid of a false assumption that the ending
string will ever be longer than the original string.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Read the entire variable, respecting escapes, which are necessary to
retain for the successive eval.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Further improvments on 2ca27ab which will allow the changelog and
install script files to contain whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Broken in 2ca27a by me, trying to fix another problem.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows local signing of a given key to help establish the web of
trust rooted at the generated (or imported) master key.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This enables pacman-key, during --init, to generate a single secret key
for the pacman keyring if one is not present. This will be used as the
root of the web of trust for those that do not wish to manage it with
their own key, as will be the default.
This does not preclude later adding other secret keys to the keyring, or
removing this one- we simply ensure you have at least one secret key
available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This upgrades the simple 15/17 scaling by package number we used before
to package sized based scaling, which is much more accurate. Addresses
some of the issues raised in FS#25817.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When the database is locked, sync operations involving transactions, such as
pacman -Syy, show the following:
:: Synchronizing package databases...
error: failed to update core (unable to lock database)
error: failed to update extra (unable to lock database)
error: failed to update community (unable to lock database)
error: failed to update multilib (unable to lock database)
error: failed to synchronize any databases
Whereas pacman -U <pkg> shows:
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
Which is much more meaningful, since the presence of db.lck may indicate an
erroneous lockfile instead of an ongoing transaction.
Improve the error messages for sync operations by advising the user to remove
db.lck if he is sure that no package manager is running.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using atol(), which on 32 bit, cannot handle values greater than
2GiB, which is fail.
Switch to a strtoull() wrapper function tailored toward parsing off_t
values. This allows parsing of very large positive integer values. off_t
is a signed type, but in our usages, we never parse or have a need for
negative values, so the function will return -1 on error.
Before:
$ pacman -Si flightgear-data | grep Size
Download Size : 2097152.00 K
Installed Size : 2097152.00 K
After:
$ ./src/pacman/pacman -Si flightgear-data | grep Size
Download Size : 2312592.52 KiB
Installed Size : 5402896.00 KiB
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Helder Martins <heldermartins89@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We only updated if the percentage incremented and enough time had
elapsed, even though the numerator of the current/howmany fraction may
have changed. Ensure we proceed with the progress bar update in these
cases so as to not mislead the user.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Any option that flips UPDATEDB=1 doesn't work right now due to what we
thought was a good idea in commit cab1379a1ab14. Fix this by not
including the update operation in the option count and special casing
it where necessary.
Also, bring back the helpful "Updating trust database" message.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Running the pacman test-suite in a non-English locale results in a few
failures. Force the test-suite to run with LC_ALL=C.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reduces from 5 to 3 the number of searches needed on the string
looking for a comparison operator, since we can so a second quick
comparison looking for '=' if we find '<' or '>'. It also makes every
search doable with strchr() or memchr() rather than the slower strstr()
method.
In testing, only 10% of splitdep calls (~1600 / 16000) during an -Ss
database load found a version comparison operator, so optimizing the not
found path to be require less work makes sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This actually does something in a scriptlet we can check with our normal
set of rules, rather than relying on pacman debug output.
Signed-off-by: Dan McGee <dan@archlinux.org>
|