| Age | Commit message (Collapse) | Author |
|---|
|
If one had a mountpoint at '/e' (don't ask), a file being installed to
'/etc' would map to it incorrectly. Ensure we do more than just prefix
matching on paths by doing some more sanity checks once the simple
strncmp() call succeeds.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Modify parse_options logic to fill an array instead of printing parsed
options. Avoid eval like the plague. Because it is the plague.
Fixes bugs such as FS#28445.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Close FS#28434
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with
making other necessary changes to fully back this (mis)feature out until
we can do it correctly.
The quick summary here is this was not implemented correctly; provides
are not fully taken into account in this logic, and making that happen
exposes a lot of other flaws in this code that are covered up later on
in the dependency resolving process by several other pieces of
convoluted and conditional logic.
Tests have been adjusted accordingly. Some test EXISTS conditions have
been removed as we already know the package is installed locally, and we
also are checking the VERSION condition anyway.
With these two related revert commits, we do have some changes in test
pass/fail results:
* upgrade078.py: does not pass, this is due to --recursive getting
removed for -U/-S operations after this commit.
* sync302.py: the version checks have been disabled, so this test
continues to pass but has been scaled back in scope.
* sync303.py: now passes, was failing before.
* sync304.py: still failing, was failing before.
* sync305.py: now passes, was failing before.
* sync306.py: still passes, was passing before.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit 09034520325efcc2e684f05fa7a99c02bad1f5be.
Tests affected by this revert have been adjusted; additionally a few
EXIST tests have been removed where there is already a VERSION test
doing the job for us.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes a problem that occurs if you tell makepkg to remove installed
dependencies (just to be sure) but there are none. As the $ was missing
in front of deplist, the check never happened and 'pacman -Rn' was
called which obviously failed.
Dan: later reported as FS#28448.
Signed-off-by: Christoph Vigano <mail@cvigano.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This wonderful/awful little bash shell variable wrecks havoc on `cd`
calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite
heavily. In pacman-optimize, we can move the change directory logic into
the bsdtar call so we are left with no usages of `cd` in the script.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The max filesize for a delta download must be the full size of the delta
file, not just what's remaining.
Fixes FS#28345
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Duplicate the fix in config file parsing from d95c0494.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
PKGBUILDs are advertised as being pure bash so it would be expected
that the default bash options are in effect when sourcing it.
This inadvertantly "fixes" FS#27780 where enabling extglob causes
the bash parser to error on non-valid bash function names like
package_libxml++(). Note that these function names are unsupported
in bash and could break again even with this "fix" in future bash
releases.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From mercurial-2.1, "hg pull" returns 1 when there are no updates.
Catch the return code and either pull the update or return an
error as appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is after some manual massaging to fix issues with newlines in some
translations of the script catalogs.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The pacman-scripts catalog is omitted here due to various newline errors
I don't have the time to fix right now.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We hardly need the complexity (or slowness) provided by the libm power
function; add a super-cheap one that suits our needs and is specialized
for the values we plan on passing in.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: don't compute lower bound unless needed, flip argument order so
out values are last, add param Doxygen documentation.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Provide a helpful error message for when creating a source tarball
and SRCPKGDEST is not writable.
Fixes FS#28197.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Very rarely a segfault would occur when removing a number of packages
due to a corrupted list for the local database (FS#27805, FS#28195).
This was caused by the alpm_list_msort function not correctly dealing
with the two new head node's prev values.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This addresses two problems:
1) echo's behavior is inconsistent when dealing with flags, and can
potentially be problematic.
$ echo -n
$ echo -- -n
-- -n
2) Always using the end of options markers prevents translated strings
from throwing errors, as shown in FS#28069.
The remaining "inconsistencies" are because printf is being used in a
guaranteed safe manner, e.g.
printf '%s\n' "$(gettext "--this can never break")"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This "fixes" two issues:
1) MAN_DIRS contains a glob by default so should not be quoted. It is
not quoted anywhere else so this should not cause breakage...
2) the find statement returns 1 when some of MAN_DIRS are missing. This
appears to only be exposed when running makepkg as root (which it appears
some wrappers do...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is particularly important in the case of FTP control connections,
which may be closed by rogue NAT/firewall devices detecting idle
connections on larger transfers which may take 5-10+ minutes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With pacman-4.0, using --noconfirm or --noprogressbar with -Q or -T
results in pacman reporting an "invalid option" error. Restrict the
passing of these options to pacman. Fixes FS#28012.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The grep statement used to check for a difference between the
installed package list before and after resolving dependencies
returns 1 if there is no difference. This sets of the error
trap when "-r" is used "unnecessarily".
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If you are a crazy developer like me and have bogus options in your
pacman.conf file, the tab completion gets messed up by the output on
stderr. Suppress it.
Fix the same basic issue in zsh_completion, thanks to the work by
Florian Pritz <bluewind@xinu.at>.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Was able to get my hands on one of these boxes today, so add yet another
new way of doing this. I'm glad these calls are so standardized. This
was compile tested on Linux and Illumos and seems to still be working in
both places.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The entry's name is only used when not "." or ".." so only print the
string then.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently, a transaction is considered to be purely package removal
until the first package install is found. This resulted in the
removed packages at the start of a combined upgrade/removal transaction
not getting the "[removal]" output.
Fixes FS#27981.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Return codes from gpg commands are currently lost. This adds the functionality
of taking non-zero exit statuses from gpg. This includes error reporting for all
gpg commands that are run individually, run in a loop, and run through a pipe.
Includes the check_keyids_exist function which verifies a key exists locally
prior to attempted local manipulation of the key.
If a gpg command has a non-zero status, pacman-key will now exit with a non-zero
status. It will print a gettext error message of gpg's failure.
Signed-off-by: canyonknight <canyonknight@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Adds functions for every gpg command. By pulling out the gpg commands from the
"program start" section, additional commands can be run before or after a
specific gpg command without adding additional clutter to the function call
section.
Adds an explicit exit status of 0 to prevent arithmetic expansions from
returning non-zero, thereby falsely causing pacman-key to have a non-zero exit
status.
This change creates the framework for additional error messages and better
exit statuses being added to every pacman-key gpg call.
Signed-off-by: canyonknight <canyonknight@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use consistent blank lines across all commands, get rid of the
translated double newlines which only serve to confuse translators, and
fix -h/--help for that extra special third command this script offers.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When asking question and stdin is piped, the response does not get printed out,
resulting in a missing \n and broken output (FS#27909); printing the response
fixes it.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We lost this logic somewhere between the libfetch and libcurl
transition, as it existed in the internal downloader, but was pulled
back only into the sync workflow. Add a helper function that will let us
check for existance in the filecache prior to calling the downloader.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is safer and guaranteed to work with even exotic character sets.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This removes the hack I added to skip '*.sig' files earlier since there
are other files that also fall into the same bucket- source packages
from `makepkg --source`, delta files, etc. Rather than prompting for
each and every one, simply skip them. Doing '-Scc' rather than '-Sc'
will delete these files if that is really what you want to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This comes from the Doxygen function documentation. Also, fix two rather
silly misspellings.
Signed-off-by: Dan McGee <dan@archlinux.org>
|