| Age | Commit message (Collapse) | Author |
|---|
|
After commit 7865fb9af487, info pages are now treated like man pages.
This means even with !docs, info pages will still be included. And including
info pages was the main reason the docs option was enabled by default
recently. So this is now longer needed, and we can revert back to !docs by
default for disabling gigantic html pages and other docs.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This was a stupid and unimportant regression caused by commit
4476598e4e128f4595d5383ecb51a9576a447b5b .
When libdownload is not available, a xfercommand is needed for this pactest
to run properly.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff
of scripts/Makefile.am, which replaces predefined expressions in
NAME.py.in pactests with configure variables.
This can be used to write pactests which consider compile time options.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
[Dan: autotools are tough, make a few adjustments for correctness]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
|
|
Xav : one minor fix (a missing %s in the downgrading message).
|
|
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had one "None" and one "None\n" string; we can let the program do the
addition of the newline so we don't have to.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently we use the INTEGRITY_CHECK array from makepkg.conf to limit both
the integrity sums generated and checked. It doesn't make a whole lot of
sense to ignore integrity sums that are present in a PKGBUILD, so this patch
will enable checking any that are available, but will only print a warning
about missing sums for those types found in INTEGRITY_CHECK.
It also adds a slight optimization of checking for openssl- we only need to
check once now because we use the same program for all checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch kills one of our hackish pseudo transactions: PRINTURIS.
(The other one is -Sw)
From now on, front-end must not call trans_commit in case of -Sp,
it should print the uris of target packages "by hand" instead.
PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip
conflict checks.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This function returns with the origin database of a package.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The yesno function had a preset argument for specifying the default answer :
yes or no.
However, in all our calls to yesno, only one used the default "no" answer.
Having to specify preset==1 for all the other cases was rather cumbersome.
To make this easier, this commit adds a noyes function, with the following
behavior :
yesno() : default answer is yes
noyes() : default answer is no
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of pausing 1.5 seconds on tests that check file mtimes, change the
mtimes to something in the far past so we can immediately tell if a file was
modified and/or touched. This saves a decent amount of time on the upgrade
tests which often check mtimes.
355 was a completely arbitrary time value, don't ask me why I picked it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a work around for FS#8725.
There are some bad combination of proxies and mirrors where the Content
Length is not returned, and thus the progress bar can't be displayed
correctly.
Dan: Note that this patch also adds a "downloading" message when the
progress bar is disabled, which was formerly not indicated at all in the
output.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The HACKING file seemed to be broken :
http://archlinux.org/pacman/HACKING.html
And indeed, running asciidoc HACKING issued a number of warnings :
WARNING: HACKING: line 27: missing [paradef-default] C-style entry
type: numbered : expected 1 got 3
WARNING: HACKING: line 44: list item 3 out of sequence
WARNING: HACKING: line 49: missing [paradef-default] C-style entry
type: numbered : expected 2 got 4
WARNING: HACKING: line 62: list item 4 out of sequence
type: numbered : expected 3 got 5
WARNING: HACKING: line 69: list item 5 out of sequence
type: numbered : expected 4 got 6
WARNING: HACKING: line 75: list item 6 out of sequence
type: numbered : expected 5 got 7
WARNING: HACKING: line 83: list item 7 out of sequence
WARNING: HACKING: line 104: missing [paradef-default] C-style entry
WARNING: HACKING: line 116: missing [paradef-default] C-style entry
WARNING: HACKING: line 126: missing [paradef-default] C-style entry
I just followed the syntax example there :
http://www.methods.co.nz/asciidoc/userguide.html#X56
And all is fine now :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pacman already localizes the yesno stuff, so doing the same in makepkg is
more consistent.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This implements FS#10630.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
list_display puts several members on the same line, which is not appropriate
for optdepends:
Optdepends: foo: feature1 bar: feature2 baz: feature3
The new list_display_linebreak function puts every member on its own line,
which is much better with optdepends:
Optdepends: foo: feature1
bar: feature2
baz: feature3
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: implement this new behavior as a new function rather than as a
parameter of list_display]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
So dump_pkg_full will indent all strings correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: add string_length function]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11283 , which was originally reported on the forums :
http://bbs.archlinux.org/viewtopic.php?id=53794
Insensitive comparisons were implicitly made before since md5sum --status was
used for checking. Now that we use openssl and compare checksums manually in
bash, we lost that feature.
This can be easily reintroduced using tr '[A-F]' '[a-f]'
What convinced me to fix it is that the md5 command line tool generates md5sums
in upper case by default :
http://www.fourmilab.ch/md5/
And finally, A-F and a-f are the same in hex and both are used.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 149839c5391e9a93 introduced a small behavior regression as a drawback
for a better portability. repo-add now includes the approximate size (to the
nearest KB) rather than an exact size due to the switching of the du command
to a more portable form. Instead of sacrificing the exact size, use
configure to help us determine a valid command to acquire our filesize and
place it in the sync database.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
See FS#10630.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
repo-add didn't handle whitespaces nicely in fields value, and this has hurt
us several times, first with provision version (FS#9171) and then with
optdepends (FS#10630), so it is time to fix it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Probably a tweakable "lockdb-retry" option was planned which is not
implemented. (Now it should be implemented in front-end.)
So now this variable was unused and caused a small memleak.
(FREE(dir) was not reached in case of error.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11218.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11203.
The doc has always mentioned NoPassiveFtp, but an inconsistency was
introduced with commit 76f816b9f764434d02e90207ee4656ebae2b6a8c when case
sensitive comparision was introduced, and was only found after commit
b3e6cf652c9e989badaf5499abb1d64c1a110927 which dropped the case insensitive
comparison.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
curl is likely to be available on the majority of systems and supports the
file:// protocol.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11180.
The usage of the total percent was detected like this :
/* use disp_percent if it is not 0, else show bar_percent */
However, it is very possible that the total percent is 0 at the beginning,
if the first packages downloaded are very small compared to the total
download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With the "set -e" property set, a failure when sourcing /etc/profile
can cause makepkg to exit without error message. The bash-completion
package activates this bug. Fixes FS#11179.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#11149.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Due to differences in handling va_list between i686 and x86_64, this bug
can only be seen on x86_64. va_list usage is not allowed but we had been
getting away with it. See
http://lists.opensuse.org/opensuse-programming/2008-02/msg00005.html
for details and explanation.
This fixes FS#11096.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When this function got a rewrite in commit f43805d875, argument and variable
names got a bit mixed up when separating the casts from the strcmp
operation. Fix the mixup which also fixes a possible segfault when this
function is called.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
By doing the bolding manually, it doesn't look as cool in the HTML generated
manpages. Let asciidoc do the work.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If a Server specified in pacman.conf had a trailing slash, libalpm ended up
building URLs with double slashes, and this broke libdownload with errors
like the following one :
error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz'
from 192.168.0.90 : Command okay
So the public function alpm_db_set_server will make sure to remove the
trailing slash of servers. For the private function
_alpm_download_single_file, I only added a comment.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Before commit fc48dc31, file:/// urls forced the use of the internal
downloader (libdownload), because the default XferCommand, wget, does not
handle them. We tried to move away from forcing usage of libdownload, so
this commit implemented the handling of file:/// urls manually. However,
this implementation is way too basic. It does not handle the progress bar,
thus nothing at all appears in pacman's output when a file: repo is
synchronized, or when a file is downloaded from a sync repo. Also, it is not
able to detect when the repo is already up-to-date. When libdownload was
used, both were handled.
It seems better to just drop this implementation for now. All users who use
libdownload will get the much better file:// handling back. For the users of
XferCommand, it will be more problematic, but they have several options:
1) Switch to a downloader handling file:// (wget doesn't, but curl does for
example).
2) Drop the file:// repo, and set up light http or ftp servers instead.
Consider that going that way would make this repo available for the whole
local network, which can be useful.
3) Switch back to libdownload, which works perfectly for many users.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11076.
1) quote the url in get_downloadclient
2) only enable nullglob where it is needed
You can see in 7fc306cd41 that nullglob was only enabled for one part, and
that it already caused other problems, which were fixed in 7ff5a917fd0.
Thanks to Henning Garus for pointing out that nullglob was problematic with
urls containing expansion char like '?'.
3) change get_downloadcmd which displayed the download command line to
download_file which actually executes the download. It seems nicer that way.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Two recent commits slightly broke the translations, so this fixes all of
them.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|