| Age | Commit message (Collapse) | Author |
|---|
|
|
|
when using rmdeps but not install, runtime dependencies do not
need special handling for (non)removal, and can be installed in the
same transaction. This allows pacman to intelligently resolve some
things which would otherwise be conflicts.
|
|
The current completions don't properly handle redirection operators, and
attempt to complete command completions rather than completing filenames
to redirect to.
bash-completion provides both _get_comp_words_by_ref and a higher-level
wrapper _init_completion, but the latter provides handling of redirection
operators, so switch to using that.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The mailing list requires subscription. So does the bug tracker,
but that is more obvious.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently this is scoped to the build() function, which is simply wrong
as it equally applies to any function. Simply moving the paragraphs up
to the main manpage section makes this clear.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Que Quotion <quequotion@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 1825bd6716c2a51c92642e8b96beac0101e83805 this was split out
from makepkg, but the warning was not properly migrated; $ext did not
ever exist.
As a result, no matter what you did, the only possible warning was:
==> WARNING: '' is not a valid archive extension.
Fix to filter based on the presence of .tar in the argument, and
building the $ext variable for all checking and messaging purposes
within the function.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to cache sources offline, makepkg creates *two* copies of every
git repo. This is a useful tradeoff for network time, but comes at the
cost of increased disk space.
Normally, git can smooth this over automagically. Whenever possible, git
objects are hardlinked to save space, but this does not work when
SRCDEST and BUILDDIR are on separate filesystems.
When the repo in question is both very large (linux.git for example is
2.2 GB) and crosses filesystem boundaries, this results in a lot of
extra disk space being used; the most likely scenario is where BUILDDIR
is a tmpfs for bonus ouch.
git(1) has a builtin feature which serves this case handily: the
--shared flag will create the info/alternates file instructing git to
not copy or hardlink or create objects/packs at all, but merely look for
them in an external location (that being the source of the clone).
The downside of using shared clones, is that if you modify and drop
commits from the original repo, or simply delete the whole repo
altogether, you break the copy. But we don't care about that here,
because
1) the BUILDDIR copy is meant to be a temporary copy strictly derived
via PKGBUILD syntax from the SRCDEST, and must be able to be
recreated at any time,
2) if the SRCDEST disappears, makepkg will redownload it, thus restoring
the objects needed by the BUILDDIR clone,
3) if the user does non-default things like hacking on the BUILDDIR copy
then deleting and re-cloning the SRCDEST may result in momentary
breakage, but ultimately should be fine -- the unique objects they
created will be stored in the BUILDDIR copy.
While it's theoretically possible that upstream will force-push to
overwrite the base tree from which makepkg is building (which they
should not do), *and* the user deleted their SRCDEST which they should
not do, *and* they saved work in makepkg's working directory which they
should not do either...
... this is an unlikely chain of events for which we should not care.
Using --shared is therefore helpful in immediately useful ways and IMHO
has no actual downsides; we should use it.
An alternative implementation would be to use worktrees. I've rejected
this since it is essentially the same as shared clones, except adding
additional restrictions on the branch namespace, and could potentially
break existing use cases such as manually handling the SRCDEST in order
to share repositories with normal working copies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
gpgme in git master now supports pkg-config and with the next release we
can and should prefer its use. However, retain the legacy code that
enables building with older versions of gpgme, as a fallback.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since DUFLAGS and DUPATH are not needed anymore remove them from the
source
Signed-off-by: Santiago Torres <santiago@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
MODECMD and OWNERCMD are not used by pacman itself, so we don't need to
check for and replace them now that pacman-optimize is removed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Makepkg used to use du --apparent-size to compute the size of the
package. Unfortunately, this would result in different sizes depending
on the filesystem used (e.g., btrfs vs ext4), which would affect
reproducible builds. Use a wc-based approach to compute sizes
Signed-off-by: Santiago Torres <santiago@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The time logged is currently given as localtime without any timezone
information. This is confusing in various scenarios.
Examples:
* If one is travelling across time-zones and the timestamps in the log
appear out of order.
* Comparing dates with `datediff` gives an offset by the time-zone
This patch would reformat the time-stamp to a full ISO-8601 version.
It includes the 'T' separating date and time including seconds.
Old: [2019-03-04 16:15]
New: [2019-03-04T16:15:45-05:00]
Signed-off-by: Florian Wehner <florian@whnr.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an alternative rootdir is specified in either meson or configure it's
not respected in the generated man pages.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
coreutils 8.26 in December 2016 added this new hashing method which is
compatible with the existing md5sum and sha*sum tool usage, while using
the blake2 hash algorithm.
makepkg uses coreutils to provide source file integrity checks via
${integ}sum binaries and it makes sense to offer this as an additional
option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
And extract all the common code to a macro.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When installing a remote package with "pacman -U <url>", pacman renames
the downloaded package file to match the name given in the
Content-Disposition header. However, pacman does not sanitize this name,
which may contain slashes, before calling rename(). A malicious server (or
a network MitM if downloading over HTTP) can send a content-disposition
header to make pacman place the file anywhere in the filesystem,
potentially leading to arbitrary root code execution. Notably, this
bypasses pacman's package signature checking.
For example, a malicious package-hosting server (or a network
man-in-the-middle, if downloading over HTTP) could serve the following
header:
Content-Disposition: filename=../../../../../../usr/share/libalpm/hooks/evil.hook
and pacman would move the downloaded file to
/usr/share/libalpm/hooks/evil.hook. This invocation of "pacman -U" would
later fail, unable to find the downloaded package in the cache directory,
but the hook file would remain in place. The commands in the malicious
hook would then be run (as root) the next time any package is installed.
Discovered-by: Adam Suhl <asuhl@mit.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rather than use M/s which can be either MB or MiB, specify that it uses
MiB (consistent with the displayed total size).
Fixes FS#59201
Signed-off-by: Sever Oraz <severoraz@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
shared_library does not generate a sane pkg-config file because it
assumes we don't want dependencies.
Additionally, since we key off of buildstatic, when *not* using
buildstatic but attempting to build libalpm on its own as static using
-Ddefault_library=static, we are building and linking to a shared
libalpm anyway.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We cannot use most of the arrays defined in schema.sh as srcinfo is dependent
on the order, but migrate the hashes for now.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We don't need to check the options twice, since it is the same check
both times. Instead, merge the conditionals.
As far as I can tell, the only reason the checks for:
- PACMAN_OPTS and
- whether to use sudo
were ever separated is due to the historic existence of --asroot, since
the second check included a check for (( ! ASROOT )) until it was
cleaned up in commit 61ba5c961e4a3536c4bbf41edb348987a9993fdb.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When pacman is run as root to do -S, -U, or -R, it would immediately
abort if pacman is not ready for use. Instead, poll the lockfile and
wait until it becomes available.
Implements FS#28840
Original-patch-by: Georges Dubus <georges.dubus@compiletoi.net>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This has historically been the case in autotools since we want vercmp to
not break mid-transaction in an install script.
For convenience, we create libalpm.a and use this to optionally generate
libalpm.so (when not configured with -Dbuildstatic=true) as well as to
link any binary which explicitly wishes to be built statically "with
libalpm", but does not care where a function is defined. meson then
treats this correctly: it builds the object file only once for both
libraries, and the compiler strips out unused functionality from the
final static binary.
Currently the only binary which requires this is vercmp.
Fixes FS#61719
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Requires modification to our comment about fall through to match compilers
expectations. Works for GCC and Clang.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a mirror responds with a 301 redirect to itself, it will create an
infinite redirect loop. This will cause pacman to hang, unresponsive to
even a SIGINT. The result is pacman being unable to sync or
download any package from a particular repo if its current mirror
is stuck in a redirect loop. Setting libcurl's MAXREDIRS option
effectively prevents a redirect loop from hanging the process.
Signed-off-by: Mark Ulrich <mark.ulrich.86@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them
raise an error.
This also disallows using 'any' as an architecture specific variable
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg will now error if disallowed variables are set inside of
the package function.
Disallowed variables are variables that do exist, like 'makedepends'
and 'pkgver' but can not be set inside of a package function.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This patch was inspired by FS#32723 which asks makepkg to install makedepends
before depends. The use case is to build a package depending on a virtual
package that is only provided by other packages (e.g. java-runtime in Arch
Linux), but wanting to build against a specific version. Installing makedepends
first (but not at the same time as depends) would allow specifying the version
to build against, instead of pacman resolving to the default version when
installing depends.
It turns out, we can already achieve installing makedepends first by specifying
dependencies only in the package function (and making sure makedepends includes
everything needed). The only issue is that if we use makepkg to install the
built package with the --install flag and along with the --rmdeps flag, we will
try to remove any installed dependencies that are specified in the depends
array in the package function. To counter this, we need to use the --unneeded
flag for the pacman call.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New verification protocols can
then be added via thirdparty libmakepkg drop-ins without requiring
modifications to verify_signature.sh
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New source protocols can then be
added via thirdparty libmakepkg drop-ins without requiring modifications
to source.sh
Fixes FS#49076
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Making the undescore be translated is probably not something we need
translators to think about.
Additionally, a number of places which use the same text differ only by
the variable being referenced, so simplifying the string means we can
drop a redundant translation.
Bonus: we save a few bytes here and there. \o/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Error if the arch array contains any and any other values. This also
fixes a bug where the check for `$arch == 'any'` which only evaluated
the first value in the array, meaning the rest of the values would not
be linted.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A number of pages don't actually exist as html inside the source tree,
and need to be generated even though they are manpages.
This caused the website.tar.gz target to only work inside a dirty tree
initially created by autotools.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
projects.archlinux.org and mailman.archlinux.org are both migrated to
new domains.
Transifex supports https, so encourage its use by default.
Take advantage of the opportunity when updating these links, to also
delist some projects that are dead.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The index embeds the names of all doc subpages, and these were never
updated.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We forgot to add BUILDINFO to the list of html docs. Instead of always
updating things in two places, just derive the one from the other.
meson did not have this problem as it already derives both lists from
one template.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|