20 files changed, 48 insertions, 2900 deletions

diff --git a/etc/Makefile.in b/etc/Makefile.in
deleted file mode 100644
index a89139b0..00000000
--- a/etc/Makefile.in
+++ /dev/null
@@ -1,556 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = etc
-DIST_COMMON = $(dist_sysconf_DATA) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/makepkg.conf.in \
-	$(srcdir)/pacman.conf.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = makepkg.conf pacman.conf
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(sysconfdir)"
-dist_sysconfDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(dist_sysconf_DATA)
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CARCH = @CARCH@
-CARCHFLAGS = @CARCHFLAGS@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHOST = @CHOST@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOXYGEN = @DOXYGEN@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-HAS_DOXYGEN_FALSE = @HAS_DOXYGEN_FALSE@
-HAS_DOXYGEN_TRUE = @HAS_DOXYGEN_TRUE@
-HAS_JAVA_FALSE = @HAS_JAVA_FALSE@
-HAS_JAVA_TRUE = @HAS_JAVA_TRUE@
-HAS_MAN2HTML_FALSE = @HAS_MAN2HTML_FALSE@
-HAS_MAN2HTML_TRUE = @HAS_MAN2HTML_TRUE@
-HAS_PERL_FALSE = @HAS_PERL_FALSE@
-HAS_PERL_TRUE = @HAS_PERL_TRUE@
-HAS_PO4A_FALSE = @HAS_PO4A_FALSE@
-HAS_PO4A_TRUE = @HAS_PO4A_TRUE@
-HAS_PYTHON_FALSE = @HAS_PYTHON_FALSE@
-HAS_PYTHON_TRUE = @HAS_PYTHON_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-JAVAC = @JAVAC@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MAN2HTML = @MAN2HTML@
-MARCHFLAG = @MARCHFLAG@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PACMAN_DEBUG_FALSE = @PACMAN_DEBUG_FALSE@
-PACMAN_DEBUG_TRUE = @PACMAN_DEBUG_TRUE@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PM_MAJOR_VERSION = @PM_MAJOR_VERSION@
-PM_MICRO_VERSION = @PM_MICRO_VERSION@
-PM_MINOR_VERSION = @PM_MINOR_VERSION@
-PM_VERSION = @PM_VERSION@
-PM_VERSION_INFO = @PM_VERSION_INFO@
-PO4A = @PO4A@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SWIG = @SWIG@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-SUBDIRS = pacman.d
-EXTRA_DIST = makepkg.conf pacman.conf
-dist_sysconf_DATA = makepkg.conf pacman.conf
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  etc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  etc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-makepkg.conf: $(top_builddir)/config.status $(srcdir)/makepkg.conf.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-pacman.conf: $(top_builddir)/config.status $(srcdir)/pacman.conf.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-dist_sysconfDATA: $(dist_sysconf_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(sysconfdir)" || $(mkdir_p) "$(DESTDIR)$(sysconfdir)"
-	@list='$(dist_sysconf_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dist_sysconfDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(sysconfdir)/$$f'"; \
-	  $(dist_sysconfDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(sysconfdir)/$$f"; \
-	done
-
-uninstall-dist_sysconfDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_sysconf_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(sysconfdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sysconfdir)/$$f"; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(sysconfdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-dist_sysconfDATA
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_sysconfDATA uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
-	clean clean-generic clean-libtool clean-recursive ctags \
-	ctags-recursive distclean distclean-generic distclean-libtool \
-	distclean-recursive distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_sysconfDATA install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am \
-	uninstall-dist_sysconfDATA uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/etc/pacman.d/Makefile b/etc/pacman.d/Makefile
deleted file mode 100644
index 41f54d8b..00000000
--- a/etc/pacman.d/Makefile
+++ /dev/null
@@ -1,375 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# etc/pacman.d/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-srcdir = .
-top_srcdir = ../..
-
-pkgdatadir = $(datadir)/pacman
-pkglibdir = $(libdir)/pacman
-pkgincludedir = $(includedir)/pacman
-top_builddir = ../..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = i686-pc-linux-gnu
-host_triplet = i686-pc-linux-gnu
-target_triplet = i686-pc-linux-gnu
-subdir = etc/pacman.d
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run aclocal-1.9
-AMDEP_FALSE = #
-AMDEP_TRUE = 
-AMTAR = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run automake-1.9
-AWK = gawk
-CARCH = i686
-CARCHFLAGS = i686
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -Wall -Werror -std=c99 -DPACMAN_DEBUG
-CHOST = i686-pc-linux-gnu
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-DOXYGEN = doxygen
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GMSGFMT = /usr/bin/msgfmt
-GREP = /bin/grep
-HAS_DOXYGEN_FALSE = #
-HAS_DOXYGEN_TRUE = 
-HAS_JAVA_FALSE = #
-HAS_JAVA_TRUE = 
-HAS_MAN2HTML_FALSE = 
-HAS_MAN2HTML_TRUE = #
-HAS_PERL_FALSE = #
-HAS_PERL_TRUE = 
-HAS_PO4A_FALSE = #
-HAS_PO4A_TRUE = 
-HAS_PYTHON_FALSE = #
-HAS_PYTHON_TRUE = 
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-INTLLIBS = 
-INTL_MACOSX_LIBS = 
-JAVAC = javac
-LDFLAGS =  -lbz2 -lm -larchive
-LIBICONV = -liconv
-LIBINTL = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBICONV = -liconv
-LTLIBINTL = 
-LTLIBOBJS = 
-MAKEINFO = ${SHELL} /home/griff/archlinux/pacman-lib/missing --run makeinfo
-MAN2HTML = 
-MARCHFLAG = march
-MKINSTALLDIRS = $(top_builddir)/./mkinstalldirs
-MSGFMT = /usr/bin/msgfmt
-MSGMERGE = /usr/bin/msgmerge
-OBJEXT = o
-PACKAGE = pacman
-PACKAGE_BUGREPORT = pacman-dev@archlinux.org
-PACKAGE_NAME = Pacman package manager
-PACKAGE_STRING = Pacman package manager 3.4.0
-PACKAGE_TARNAME = pacman
-PACKAGE_VERSION = 3.4.0
-PACMAN_DEBUG_FALSE = #
-PACMAN_DEBUG_TRUE = 
-PATH_SEPARATOR = :
-PM_MAJOR_VERSION = 0
-PM_MICRO_VERSION = 0
-PM_MINOR_VERSION = 1
-PM_VERSION = 0.1.0
-PM_VERSION_INFO = 1:0:1
-PO4A = po4a
-POSUB = po
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/sh
-STRIP = strip
-SWIG = swig
-USE_NLS = yes
-VERSION = 3.4.0
-XGETTEXT = /usr/bin/xgettext
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE = 
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias = 
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias = 
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /home/griff/archlinux/pacman-lib/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = mkdir -p --
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target = i686-pc-linux-gnu
-target_alias = 
-target_cpu = i686
-target_os = linux-gnu
-target_vendor = pc
-EXTRA_DIST = 
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  etc/pacman.d/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  etc/pacman.d/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-data-hook install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-hook uninstall-info-am
-
-
-install-data-hook:
-	mkdir -p $(DESTDIR)$(sysconfdir)/pacman.d ; \
-	for j in $(EXTRA_DIST); do \
-	    $(INSTALL) -c -m 644 $(srcdir)/$$j $(DESTDIR)$(sysconfdir)/pacman.d/$$j ; \
-	done
-
-uninstall-hook:
-	for j in $(EXTRA_DIST); do \
-	    rm -f $(DESTDIR)$(sysconfdir)/pacman.d/$$j ; \
-	done
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/etc/pacman.d/Makefile.in b/etc/pacman.d/Makefile.in
deleted file mode 100644
index 5d22c4b7..00000000
--- a/etc/pacman.d/Makefile.in
+++ /dev/null
@@ -1,375 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = etc/pacman.d
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CARCH = @CARCH@
-CARCHFLAGS = @CARCHFLAGS@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHOST = @CHOST@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOXYGEN = @DOXYGEN@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-HAS_DOXYGEN_FALSE = @HAS_DOXYGEN_FALSE@
-HAS_DOXYGEN_TRUE = @HAS_DOXYGEN_TRUE@
-HAS_JAVA_FALSE = @HAS_JAVA_FALSE@
-HAS_JAVA_TRUE = @HAS_JAVA_TRUE@
-HAS_MAN2HTML_FALSE = @HAS_MAN2HTML_FALSE@
-HAS_MAN2HTML_TRUE = @HAS_MAN2HTML_TRUE@
-HAS_PERL_FALSE = @HAS_PERL_FALSE@
-HAS_PERL_TRUE = @HAS_PERL_TRUE@
-HAS_PO4A_FALSE = @HAS_PO4A_FALSE@
-HAS_PO4A_TRUE = @HAS_PO4A_TRUE@
-HAS_PYTHON_FALSE = @HAS_PYTHON_FALSE@
-HAS_PYTHON_TRUE = @HAS_PYTHON_TRUE@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-JAVAC = @JAVAC@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MAN2HTML = @MAN2HTML@
-MARCHFLAG = @MARCHFLAG@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PACMAN_DEBUG_FALSE = @PACMAN_DEBUG_FALSE@
-PACMAN_DEBUG_TRUE = @PACMAN_DEBUG_TRUE@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PM_MAJOR_VERSION = @PM_MAJOR_VERSION@
-PM_MICRO_VERSION = @PM_MICRO_VERSION@
-PM_MINOR_VERSION = @PM_MINOR_VERSION@
-PM_VERSION = @PM_VERSION@
-PM_VERSION_INFO = @PM_VERSION_INFO@
-PO4A = @PO4A@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SWIG = @SWIG@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-EXTRA_DIST = 
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  etc/pacman.d/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  etc/pacman.d/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-data-hook install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-hook uninstall-info-am
-
-
-install-data-hook:
-	mkdir -p $(DESTDIR)$(sysconfdir)/pacman.d ; \
-	for j in $(EXTRA_DIST); do \
-	    $(INSTALL) -c -m 644 $(srcdir)/$$j $(DESTDIR)$(sysconfdir)/pacman.d/$$j ; \
-	done
-
-uninstall-hook:
-	for j in $(EXTRA_DIST); do \
-	    rm -f $(DESTDIR)$(sysconfdir)/pacman.d/$$j ; \
-	done
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/libalpm/add.c b/lib/libalpm/add.c
index a4c5a557..cfb7193f 100644
--- a/lib/libalpm/add.c
+++ b/lib/libalpm/add.c
@@ -318,7 +318,7 @@ int _alpm_add_prepare(pmtrans_t *trans, pmdb_t *db, PMList **data)
 		EVENT(trans, PM_TRANS_EVT_FILECONFLICTS_START, NULL, NULL);
 
 		_alpm_log(PM_LOG_FLOW1, _("looking for file conflicts"));
-		lp = _alpm_db_find_conflicts(db, trans->packages, handle->root, &skiplist);
+		lp = _alpm_db_find_conflicts(db, trans, handle->root, &skiplist);
 		if(lp != NULL) {
 			if(data) {
 				*data = lp;
diff --git a/lib/libalpm/alpm.h b/lib/libalpm/alpm.h
index 211ec99b..3807b11e 100644
--- a/lib/libalpm/alpm.h
+++ b/lib/libalpm/alpm.h
@@ -308,7 +308,8 @@ enum {
 enum {
 	PM_TRANS_PROGRESS_ADD_START,
 	PM_TRANS_PROGRESS_UPGRADE_START,
-	PM_TRANS_PROGRESS_REMOVE_START
+	PM_TRANS_PROGRESS_REMOVE_START,
+	PM_TRANS_PROGRESS_CONFLICTS_START
 };
 
 /* Transaction Event callback */
diff --git a/lib/libalpm/conflict.c b/lib/libalpm/conflict.c
index 8cfe0f6e..2c63143e 100644
--- a/lib/libalpm/conflict.c
+++ b/lib/libalpm/conflict.c
@@ -201,21 +201,24 @@ PMList *_alpm_checkconflicts(pmdb_t *db, PMList *packages)
 	return(baddeps);
 }
 
-PMList *_alpm_db_find_conflicts(pmdb_t *db, PMList *targets, char *root, PMList **skip_list)
+PMList *_alpm_db_find_conflicts(pmdb_t *db, pmtrans_t *trans, char *root, PMList **skip_list)
 {
 	PMList *i, *j, *k;
 	char *filestr = NULL;
 	char path[PATH_MAX+1];
 	struct stat buf, buf2;
 	PMList *conflicts = NULL;
+	PMList *targets = trans->packages;
+	double percent;
 
 	if(db == NULL || targets == NULL || root == NULL) {
 		return(NULL);
 	}
-
 	/* CHECK 1: check every target against every target */
 	for(i = targets; i; i = i->next) {
 		pmpkg_t *p1 = (pmpkg_t*)i->data;
+		percent = (double)(_alpm_list_count(targets) - _alpm_list_count(i) + 1) / _alpm_list_count(targets);
+		PROGRESS(trans, PM_TRANS_PROGRESS_CONFLICTS_START, "", (percent * 100), _alpm_list_count(targets), (_alpm_list_count(targets) - _alpm_list_count(i) +1));
 		for(j = i; j; j = j->next) {
 			pmpkg_t *p2 = (pmpkg_t*)j->data;
 			if(strcmp(p1->name, p2->name)) {
diff --git a/lib/libalpm/conflict.h b/lib/libalpm/conflict.h
index 7b8c9643..5c40af27 100644
--- a/lib/libalpm/conflict.h
+++ b/lib/libalpm/conflict.h
@@ -33,7 +33,7 @@ typedef struct __pmconflict_t {
 } pmconflict_t;
 
 PMList *_alpm_checkconflicts(pmdb_t *db, PMList *packages);
-PMList *_alpm_db_find_conflicts(pmdb_t *db, PMList *targets, char *root, PMList **skip_list);
+PMList *_alpm_db_find_conflicts(pmdb_t *db, pmtrans_t *trans, char *root, PMList **skip_list);
 
 #endif /* _ALPM_CONFLICT_H */
 
diff --git a/lib/libalpm/po/Makefile b/lib/libalpm/po/Makefile
deleted file mode 100644
index f3e778c0..00000000
--- a/lib/libalpm/po/Makefile
+++ /dev/null
@@ -1,421 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.13
-
-PACKAGE = pacman
-VERSION = 3.4.0
-
-SHELL = /bin/sh
-
-
-srcdir = .
-top_srcdir = ../../..
-
-
-prefix = /usr
-exec_prefix = ${prefix}
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = /bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-mkinstalldirs = /bin/install -c -d
-
-GMSGFMT = /usr/bin/msgfmt
-MSGFMT = /usr/bin/msgfmt
-XGETTEXT = /usr/bin/xgettext
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = /usr/bin/msgmerge --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES =  de.po fr.po hu.po
-GMOFILES =  de.gmo fr.gmo hu.gmo
-UPDATEPOFILES =  de.po-update fr.po-update hu.po-update
-DUMMYPOFILES =  de.nop fr.nop hu.nop
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-     ../../../add.c \
-     ../../../alpm.c \
-     ../../../backup.c \
-     ../../../be_files.c \
-     ../../../cache.c \
-     ../../../conflict.c \
-     ../../../db.c \
-     ../../../deps.c \
-     ../../../error.c \
-     ../../../group.c \
-     ../../../handle.c \
-     ../../../list.c \
-     ../../../log.c \
-     ../../../md5.c \
-     ../../../md5driver.c \
-     ../../../package.c \
-     ../../../provide.c \
-     ../../../remove.c \
-     ../../../sha1.c \
-     ../../../sync.c \
-     ../../../trans.c \
-     ../../../util.c \
-     ../../../versioncmp.c
-
-CATALOGS =  de.gmo fr.gmo hu.gmo
-
-# Makevars gets inserted here. (Don't remove this line!)
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = libalpm
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ../../../
-
-# These options get passed to xgettext.
-XGETTEXT_OPTIONS = \
-  --keyword=_ --flag=_:1:pass-c-format \
-  --keyword=N_ --flag=N_:1:pass-c-format
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
-# package.  (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.)  Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright.  The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = Yoyodyne, Inc.
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-#   in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-#   understood.
-# - Strings which make invalid assumptions about notation of date, time or
-#   money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = bug-gnu-gettext@gnu.org
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used.  It is usually empty.
-EXTRA_LOCALE_CATEGORIES =
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: all-yes
-
-all-yes: stamp-po
-all-no:
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	  for file in Makevars; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f stamp-poT
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  dists="$$dists Makevars.template"; \
-	fi; \
-	if test -f $(srcdir)/ChangeLog; then \
-	  dists="$$dists ChangeLog"; \
-	fi; \
-	for i in 0 1 2 3 4 5 6 7 8 9; do \
-	  if test -f $(srcdir)/ChangeLog.$$i; then \
-	    dists="$$dists ChangeLog.$$i"; \
-	  fi; \
-	done; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in LINGUAS
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/libalpm/po/Makefile.in b/lib/libalpm/po/Makefile.in
deleted file mode 100644
index 74c344c1..00000000
--- a/lib/libalpm/po/Makefile.in
+++ /dev/null
@@ -1,355 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.13
-
-PACKAGE = pacman
-VERSION = 3.4.0
-
-SHELL = /bin/sh
-
-
-srcdir = .
-top_srcdir = ../../..
-
-
-prefix = /usr
-exec_prefix = ${prefix}
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = /bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-mkinstalldirs = /bin/install -c -d
-
-GMSGFMT = /usr/bin/msgfmt
-MSGFMT = /usr/bin/msgfmt
-XGETTEXT = /usr/bin/xgettext
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = /usr/bin/msgmerge --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: all-yes
-
-all-yes: stamp-po
-all-no:
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	  for file in Makevars; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f stamp-poT
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  dists="$$dists Makevars.template"; \
-	fi; \
-	if test -f $(srcdir)/ChangeLog; then \
-	  dists="$$dists ChangeLog"; \
-	fi; \
-	for i in 0 1 2 3 4 5 6 7 8 9; do \
-	  if test -f $(srcdir)/ChangeLog.$$i; then \
-	    dists="$$dists ChangeLog.$$i"; \
-	  fi; \
-	done; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/lib/libalpm/po/POTFILES b/lib/libalpm/po/POTFILES
deleted file mode 100644
index 24c734b1..00000000
--- a/lib/libalpm/po/POTFILES
+++ /dev/null
@@ -1,23 +0,0 @@
-     ../../../add.c \
-     ../../../alpm.c \
-     ../../../backup.c \
-     ../../../be_files.c \
-     ../../../cache.c \
-     ../../../conflict.c \
-     ../../../db.c \
-     ../../../deps.c \
-     ../../../error.c \
-     ../../../group.c \
-     ../../../handle.c \
-     ../../../list.c \
-     ../../../log.c \
-     ../../../md5.c \
-     ../../../md5driver.c \
-     ../../../package.c \
-     ../../../provide.c \
-     ../../../remove.c \
-     ../../../sha1.c \
-     ../../../sync.c \
-     ../../../trans.c \
-     ../../../util.c \
-     ../../../versioncmp.c
diff --git a/lib/libalpm/po/de.gmo b/lib/libalpm/po/de.gmo
deleted file mode 100644
index 6785ddaf..00000000
--- a/lib/libalpm/po/de.gmo
+++ /dev/null
diff --git a/lib/libalpm/po/fr.gmo b/lib/libalpm/po/fr.gmo
deleted file mode 100644
index bdcea213..00000000
--- a/lib/libalpm/po/fr.gmo
+++ /dev/null
diff --git a/lib/libalpm/po/hu.gmo b/lib/libalpm/po/hu.gmo
deleted file mode 100644
index 96547623..00000000
--- a/lib/libalpm/po/hu.gmo
+++ /dev/null
diff --git a/src/pacman/po/Makefile b/src/pacman/po/Makefile
deleted file mode 100644
index 097a22ee..00000000
--- a/src/pacman/po/Makefile
+++ /dev/null
@@ -1,412 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.13
-
-PACKAGE = pacman
-VERSION = 3.4.0
-
-SHELL = /bin/sh
-
-
-srcdir = .
-top_srcdir = ../../..
-
-
-prefix = /usr
-exec_prefix = ${prefix}
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = /bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-mkinstalldirs = /bin/install -c -d
-
-GMSGFMT = /usr/bin/msgfmt
-MSGFMT = /usr/bin/msgfmt
-XGETTEXT = /usr/bin/xgettext
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = /usr/bin/msgmerge --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES =  de.po fr.po hu.po
-GMOFILES =  de.gmo fr.gmo hu.gmo
-UPDATEPOFILES =  de.po-update fr.po-update hu.po-update
-DUMMYPOFILES =  de.nop fr.nop hu.nop
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-     ../../../add.c \
-     ../../../conf.c \
-     ../../../deptest.c \
-     ../../../download.c \
-     ../../../list.c \
-     ../../../log.c \
-     ../../../log.h \
-     ../../../package.c \
-     ../../../pacman.c \
-     ../../../query.c \
-     ../../../remove.c \
-     ../../../sync.c \
-     ../../../trans.c \
-     ../../../util.c
-
-CATALOGS =  de.gmo fr.gmo hu.gmo
-
-# Makevars gets inserted here. (Don't remove this line!)
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = pacman
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ../../../
-
-# These options get passed to xgettext.
-XGETTEXT_OPTIONS = \
-  --keyword=_ --flag=_:1:pass-c-format \
-  --keyword=N_ --flag=N_:1:pass-c-format
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
-# package.  (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.)  Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright.  The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = Yoyodyne, Inc.
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-#   in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-#   understood.
-# - Strings which make invalid assumptions about notation of date, time or
-#   money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = bug-gnu-gettext@gnu.org
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used.  It is usually empty.
-EXTRA_LOCALE_CATEGORIES =
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: all-yes
-
-all-yes: stamp-po
-all-no:
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	  for file in Makevars; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f stamp-poT
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  dists="$$dists Makevars.template"; \
-	fi; \
-	if test -f $(srcdir)/ChangeLog; then \
-	  dists="$$dists ChangeLog"; \
-	fi; \
-	for i in 0 1 2 3 4 5 6 7 8 9; do \
-	  if test -f $(srcdir)/ChangeLog.$$i; then \
-	    dists="$$dists ChangeLog.$$i"; \
-	  fi; \
-	done; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in LINGUAS
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/src/pacman/po/Makefile.in b/src/pacman/po/Makefile.in
deleted file mode 100644
index 74c344c1..00000000
--- a/src/pacman/po/Makefile.in
+++ /dev/null
@@ -1,355 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.13
-
-PACKAGE = pacman
-VERSION = 3.4.0
-
-SHELL = /bin/sh
-
-
-srcdir = .
-top_srcdir = ../../..
-
-
-prefix = /usr
-exec_prefix = ${prefix}
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = /bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-mkinstalldirs = /bin/install -c -d
-
-GMSGFMT = /usr/bin/msgfmt
-MSGFMT = /usr/bin/msgfmt
-XGETTEXT = /usr/bin/xgettext
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = /usr/bin/msgmerge --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: all-yes
-
-all-yes: stamp-po
-all-no:
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	  for file in Makevars; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-yes
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f stamp-poT
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  dists="$$dists Makevars.template"; \
-	fi; \
-	if test -f $(srcdir)/ChangeLog; then \
-	  dists="$$dists ChangeLog"; \
-	fi; \
-	for i in 0 1 2 3 4 5 6 7 8 9; do \
-	  if test -f $(srcdir)/ChangeLog.$$i; then \
-	    dists="$$dists ChangeLog.$$i"; \
-	  fi; \
-	done; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/src/pacman/po/POTFILES b/src/pacman/po/POTFILES
deleted file mode 100644
index 18d19054..00000000
--- a/src/pacman/po/POTFILES
+++ /dev/null
@@ -1,14 +0,0 @@
-     ../../../add.c \
-     ../../../conf.c \
-     ../../../deptest.c \
-     ../../../download.c \
-     ../../../list.c \
-     ../../../log.c \
-     ../../../log.h \
-     ../../../package.c \
-     ../../../pacman.c \
-     ../../../query.c \
-     ../../../remove.c \
-     ../../../sync.c \
-     ../../../trans.c \
-     ../../../util.c
diff --git a/src/pacman/po/de.gmo b/src/pacman/po/de.gmo
deleted file mode 100644
index f093f1eb..00000000
--- a/src/pacman/po/de.gmo
+++ /dev/null
diff --git a/src/pacman/po/fr.gmo b/src/pacman/po/fr.gmo
deleted file mode 100644
index 893bf0a5..00000000
--- a/src/pacman/po/fr.gmo
+++ /dev/null
diff --git a/src/pacman/po/hu.gmo b/src/pacman/po/hu.gmo
deleted file mode 100644
index 3318ffa0..00000000
--- a/src/pacman/po/hu.gmo
+++ /dev/null
diff --git a/src/pacman/trans.c b/src/pacman/trans.c
index 2f770cf0..29e55791 100644
--- a/src/pacman/trans.c
+++ b/src/pacman/trans.c
@@ -57,7 +57,9 @@ void cb_trans_evt(unsigned char event, void *data1, void *data2)
 			pm_fprintf(stderr, NL, _("checking dependencies... "));
 		break;
 		case PM_TRANS_EVT_FILECONFLICTS_START:
-			pm_fprintf(stderr, NL, _("checking for file conflicts... "));
+			if(config->noprogressbar) {
+			MSG(NL, _("checking for file conflicts... "));
+			}
 		break;
 		case PM_TRANS_EVT_RESOLVEDEPS_START:
 			pm_fprintf(stderr, NL, _("resolving dependencies... "));
@@ -65,8 +67,14 @@ void cb_trans_evt(unsigned char event, void *data1, void *data2)
 		case PM_TRANS_EVT_INTERCONFLICTS_START:
 			pm_fprintf(stderr, NL, _("looking for inter-conflicts... "));
 		break;
-		case PM_TRANS_EVT_CHECKDEPS_DONE:
 		case PM_TRANS_EVT_FILECONFLICTS_DONE:
+			if(config->noprogressbar) {
+				MSG(CL, _("done.\n"));
+			} else {
+				MSG(NL, "");
+			}
+		break;
+		case PM_TRANS_EVT_CHECKDEPS_DONE:
 		case PM_TRANS_EVT_RESOLVEDEPS_DONE:
 		case PM_TRANS_EVT_INTERCONFLICTS_DONE:
 			pm_fprintf(stderr, CL, _("done.\n"));
@@ -282,10 +290,11 @@ void cb_trans_progress(unsigned char event, char *pkgname, int percent, int howm
 {
 	int i, hash;
 	unsigned int maxpkglen, progresslen = maxcols - 57;
-	char *addstr, *upgstr, *removestr, *ptr;
+	char *addstr, *upgstr, *removestr, *conflictstr, *ptr;
 	addstr = strdup(_("installing"));
 	upgstr = strdup(_("upgrading"));
 	removestr = strdup(_("removing"));
+	conflictstr = strdup(_("checking for file conflicts"));
 
 	if(config->noprogressbar) {
 		return;
@@ -307,9 +316,14 @@ void cb_trans_progress(unsigned char event, char *pkgname, int percent, int howm
 		case PM_TRANS_PROGRESS_UPGRADE_START:
 			ptr = upgstr;
 		break;
+
 		case PM_TRANS_PROGRESS_REMOVE_START:
 			ptr = removestr;
 		break;
+
+		case PM_TRANS_PROGRESS_CONFLICTS_START:
+			ptr = conflictstr;
+		break;
 	}
 	hash=percent*progresslen/100;
 
@@ -318,13 +332,29 @@ void cb_trans_progress(unsigned char event, char *pkgname, int percent, int howm
 	if(strlen(pkgname)>maxpkglen)
 		pkgname[maxpkglen]='\0';
 
-	putchar('(');
-	for(i=0;i<(int)log10(howmany)-(int)log10(remain);i++)
-		putchar(' ');
-	printf("%d/%d) %s %s ", remain, howmany, ptr, pkgname);
-	if (strlen(pkgname)<maxpkglen)
-		for (i=maxpkglen-strlen(pkgname)-1; i>0; i--)
+	switch (event) {
+	case PM_TRANS_PROGRESS_ADD_START:
+	case PM_TRANS_PROGRESS_UPGRADE_START:
+	case PM_TRANS_PROGRESS_REMOVE_START:
+		putchar('(');
+		for(i=0;i<(int)log10(howmany)-(int)log10(remain);i++)
+			putchar(' ');
+		printf("%d/%d) %s %s ", remain, howmany, ptr, pkgname);
+		if (strlen(pkgname)<maxpkglen)
+			for (i=maxpkglen-strlen(pkgname)-1; i>0; i--)
+				putchar(' ');
+		break;
+
+	case PM_TRANS_PROGRESS_CONFLICTS_START:
+		printf("%s (", ptr);
+		for(i=0;i<(int)log10(howmany)-(int)log10(remain);i++)
+			putchar(' ');
+		printf("%d/%d) ", remain, howmany);
+		for (i=maxpkglen; i>0; i--)
 			putchar(' ');
+		break;
+	}
+
 	printf("[");
 	for (i = progresslen; i > 0; i--) {
 		if (i >= progresslen - hash)