| Age | Commit message (Collapse) | Author |
|---|
|
* Now we have more than one PXE boot methods.
* archiso_ndb_srv= accepts special ${pxeserver} parameter like in others PXE hooks.
* This allows to setup network from initramfs without forcing using a special PXE hook.
* Update README
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
On machines with common graphics chipsets (radeon, intel, nvidia), enable
KMS early. Downloading images from a remote server can take time, better
view the status with a nice resolution.
|
|
Otherwise does not work.
22100 Nov 29 09:29 ./lib/libnss_dns-2.14.1.so
20 Nov 29 09:29 ./lib/libnss_dns.so.2 -> libnss_dns-2.14.1.so
46732 Nov 29 09:29 ./lib/libnss_files-2.14.1.so
22 Nov 29 09:29 ./lib/libnss_files.so.2 -> libnss_files-2.14.1.so
Looks like my test was made before introducing symlinks
and using directly libnss_dns-$VERSION.so.2 as libnss_dns.so.2.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
We are currently checksuming all files inside $archisobasedir
(aitab, *sfs, kernel/initramfs and boot/syslinux related files)
this is stored in one file only. Its works good for now,
but I think we only need to checksum only aitab and *.sfs if they are needed.
Currently if you boot a dual-iso in i686, also checksum is done
for *.sfs of x86_64. Not a big issue, this just take a bit more time.
The real issue is when booting via PXE with HTTP/FTP methods,
since they download only aitab and needed *.sfs files,
can not use directly the only one file where checksums are stored.
This patch does:
(1) Do not checksum syslinux related files, anyway you are already reach initramfs stage.
(2) Do not checksum kernel/initramfs files, for the same as (1)
(3) Two checksum.${arch}.md5 for each i686 and x86_64 for only aitab and *.sfs.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
[ramfs /]# cat /etc/resolv.conf
nameserver 192.168.0.77
[ramfs /]# curl -O http://releng.archlinux.org/pxeboot/README
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1129 100 1129 0 0 2191 0 --:--:-- --:--:-- --:--:-- 4589
[ramfs /]#
Do not "add_binary /lib/libnss_dns.so.2", because will add libnss_dns-VERSION.so.2 as libnss_dns.so.2
Is not an issue will work (nobody links directly to VERSION), but is not nice.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
It add support for using *.sfs images via NFS.
It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New boot parameters:
archiso_nfs_srv=IP:/path
Set the NFS IP and path. Accepts ${pxeserver} as IP.
archiso_nfs_opt= Sets NFS mount opts (comma separated)
Defaults to:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
:: Running Hook [archiso_pxe_common]
IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500
IP-Config: eth0 guessed broadcast address 192.168.0.255
IP-Config: eth0 guessed nameserver address 192.168.0.218
IP-Config: eth0 complete (from 192.168.0.218):
address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0
gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0
rootserver: 192.168.0.218 rootpath:
filename :
:: Running Hook [archiso_pxe_nbd]
:: Running Hook [archiso_pxe_curl]
:: Running Hook [archiso_pxe_nfs]
:: Mounting '192.168.0.77:/mnt/iso'
...
192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77)
...
My /etc/exports
/mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
|
|
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files.
The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it
(like in archiso_loop_mnt) in the ISO case, or just do a bind mount to
/run/archiso/bootmnt in the other case.
This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New bootparm:
* archiso_curl_url=(first form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form)
Use an absolute URL. Fetch the entire ISO
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form)
Use the as IP the same server where PXE reside. Fetch the entire ISO
* archiso_curl_url=(second form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form)
Use an absolute URL. Where unpacked (an example name) is a directory where
${archisobasedir} ("arch" by default) is located with all *.sfs.
This fetch only needed files.
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form)
Use the as IP the same server where PXE reside. Where unpacked (an example name)
is a directory where ${archisobasedir} ("arch" by default)
is located with all *.sfs. This fetch only needed files.
* curlspace_size= Set a size for a tmpfs filesystem where files are downloaded.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
One hook only setup the network device (archiso_pxe_common) the other
setup the NBD client (archiso_pxe_nbd).
New bootparam:
archiso_pxe_srv=IP
Allow to set an IP different from the PXE server.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
In this way allow to mount /run/archiso/bootmnt from another hook,
but still use the logic from the main mount_hook, skipping only this mount.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Now bootmnt/img_dev is always a ro-mount,
and cowspace is first ro-mount then rw-mount.
* Fix a "hidden" bug: at the time of test [[ -ef ]], if devices nodes
are not ready, such test will fail then archisodevice will mounted ro and
when cow_device is mounted to be rw it fails.
(I recently suffered this on a machine with slow USB)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Boot media is already available in /run/archiso/bootmnt
if no copytoram is used.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* ipconfig cmd writes a file in /tmp that is ready for direct evaluation.
We can use this instead of parsing the output, to do this some variable
renames are needed.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Remove IDE stuff.
* Remove modules that can be added via relevant hooks.
* Replace sata with virtio in baseline profile.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
STATUS: Working (std boot, loop_mnt, pxe) with copytoram=[y|n].
NEEDS: initscript > 2011.07.3, mkinitcpio > 0.7.2, mkinitcpio-busybox > 1.18.5-1
Purpose: we need this for propertly unmount $cow_device,
used for persistent dm-snapshot devices.
This hook is based on work from Tom Gundersen[#1],
but adapted for archiso things (specially the shutdown script)
[#1] http://mailman.archlinux.org/pipermail/arch-projects/2011-July/001549.html
[#2] http://projects.archlinux.org/initscripts.git/commit/?id=1fa7b4b453e96533ae1db3630031285e5fc302b3
[#3] http://mailman.archlinux.org/pipermail/arch-projects/2011-August/001749.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Support img_label=
* Allow use img_dev= as cow_device=
* Use new function _mnt_dev() from archiso.
* Check for error while setting loopback device.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This allow to take control again of these mountpoints outside initramfs.
(i.e: on deinitramfs stage at shutdown for unmount it)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Add some options to control where all COW files will be located.
Until this moment all files are located in a tmpfs filesystem.
Now is posible to set a device via a filesystem label or device node
plus a directory, where all these files will be stored.
All dm-snapshot devices will be persistent by default,
but this can be changed if wanted.
Take care, a filesystem that does not support sparse files maybe
is not the best choice for COW files, because they are created with
the same size (is apparent) like the read-only device (the image.fs inside .sfs).
Of course sooner or later, depending on use, these files actually end up
being as big as the read-only device.
KNOW-ISSUE: On shutdown in step "Unmounting Filesystems" will [FAIL],
all filesystem except $cow_device, will be unmounted/remounted-ro.
For this reason this change needs an archiso_shutdown hook, thats
unmount all block devices used by archiso. (Work in progress)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Separate this code from main mount hook, and make it more generic.
_mnt_dev(device, mountpoint, flags) ->
wait for device and mount, launch a shell if something goes wrong.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* These files was added during developement stage of dm-snapshot branch
of archiso. Never was used, sinse archiso works directly with dmsetup
and with device nodes in /dev/mapper/
* Added 11-dm-initramfs.rules to keep dm info about nodes persistent
in udev db across initramfs/real-root.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This makes archiso_pxe_nbd functionallity full-independient from
archiso profiles (configs/*).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Otherwise archiso_loop_mnt will fail.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Default value is "arch". This implies that all device mapper node
for snapshot devices will be for example: arch_root-image.
This helps AIF to hidden these devices from "Device Configuration".
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Requested at FS#25051
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Use device mapper + snapshot module, instead union layer filesystem.
* A block-level approach vs vfs-level.
* No more unofficial (Linux) things.
* More memory is needed.
* Refactor mkarchiso.
* Refactor hooks/archiso.
* Fix install/archiso_pxe_nbd
(due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules())
[Thanks Dave for the improved workaround]
* New configs/releng to build official images.
* Works with a Bash script instead of Makefile.
(better control and easy to maintain)
* Remove configs/syslinux-iso.
* Remove archiso2dual script. Integrate functionality in configs/releng.
* New configs/baseline to build the most basic live medium or use as template.
* New README (draft). [Thanks Dieter for fixing english grammar]
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Change from none -> union (looks like util-linux is confused BUG?)
Avoid the message: "umount aufs failed: not found" at shutdown.
#1 mount -t tmpfs none /something
#2 mount -t tmpfs xxxx /something
The output of findmnt -rnu -o SOURCE will be blank in #1.
* Change from aufs -> auto, make its more generic.
* Update devpts and shm entries.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Add two parameters:
img_dev=/dev/sdNM
where /dev/sdNM is the device where .iso is located.
img_loop=/path/to/arch.iso
where /path/to/arch.iso is the full path of the .iso in the device img_dev.
Original idea from Baurzhan Muftakhidinov.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
-D <install_dir> allow to select install directory on target media
defaults to "arch".
There is a new %INSTALL_DIR% macro for syslinux.cfg.
This is how ISO will look now:
/syslinux only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/ isomounts + *.sqfs images
/arch/boot/ Linux + initramfs + Memtest86+ + other files for early boot stage
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This was wrong and can never have worked. Fix it.
|
|
Newer nbd-server uses config file instead of parameters via cmd line (deprecated).
Also does not use a fixed port (oldstyle).
Sample nbd-server.conf that works with this change:
-- CUT HERE --
[generic]
[archiso]
readonly = true
exportname = /tmp/archlinux.iso
-- CUT HERE --
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This step is now done at archiso hook (commit ba638480ce)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
A shell prompt is at least better than a kernel panic :)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* squashfs images that will be part of read-only branchs for union mount in /
are mounted on /ro_branch/{image_name} instead of /tmpfs/mnt/{image_name}
(and avoid empty dirs on live env under /mnt)
* tmpfs that will be part of read-write branch for union mount in /
is mounted on /rw_branch instead of /tmpfs
* tmpfs that is for store *.sqfs images when copytoram=y, is mounted on
/copytoram instead of /tmpfs.sqfs
* tmpfs_size= parameter renamed to rw_branch_size=
* tmpfs_sqfs_size= parameter renamed to copytoram_size=
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
More generic way than current method, and fix if logic (inverted).
Takes the same actions independent of medium (disk/cdrom).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|