| Age | Commit message (Collapse) | Author |
|---|
|
This was the first implementation that downloads the complete ISO,
but now we have the posibility of download only needed *.sfs files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This was useful to me during development of dm-snapshot support
to create very quickly isos without wating for SquashFS compression.
Is time to remove this, I think the is no practical usage,
and make the code a bit more simple.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Now we have more than one PXE boot methods.
* archiso_ndb_srv= accepts special ${pxeserver} parameter like in others PXE hooks.
* This allows to setup network from initramfs without forcing using a special PXE hook.
* Update README
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
It add support for using *.sfs images via NFS.
It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New boot parameters:
archiso_nfs_srv=IP:/path
Set the NFS IP and path. Accepts ${pxeserver} as IP.
archiso_nfs_opt= Sets NFS mount opts (comma separated)
Defaults to:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
:: Running Hook [archiso_pxe_common]
IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500
IP-Config: eth0 guessed broadcast address 192.168.0.255
IP-Config: eth0 guessed nameserver address 192.168.0.218
IP-Config: eth0 complete (from 192.168.0.218):
address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0
gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0
rootserver: 192.168.0.218 rootpath:
filename :
:: Running Hook [archiso_pxe_nbd]
:: Running Hook [archiso_pxe_curl]
:: Running Hook [archiso_pxe_nfs]
:: Mounting '192.168.0.77:/mnt/iso'
...
192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77)
...
My /etc/exports
/mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
|
|
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files.
The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it
(like in archiso_loop_mnt) in the ISO case, or just do a bind mount to
/run/archiso/bootmnt in the other case.
This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New bootparm:
* archiso_curl_url=(first form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form)
Use an absolute URL. Fetch the entire ISO
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form)
Use the as IP the same server where PXE reside. Fetch the entire ISO
* archiso_curl_url=(second form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form)
Use an absolute URL. Where unpacked (an example name) is a directory where
${archisobasedir} ("arch" by default) is located with all *.sfs.
This fetch only needed files.
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form)
Use the as IP the same server where PXE reside. Where unpacked (an example name)
is a directory where ${archisobasedir} ("arch" by default)
is located with all *.sfs. This fetch only needed files.
* curlspace_size= Set a size for a tmpfs filesystem where files are downloaded.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
One hook only setup the network device (archiso_pxe_common) the other
setup the NBD client (archiso_pxe_nbd).
New bootparam:
archiso_pxe_srv=IP
Allow to set an IP different from the PXE server.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
STATUS: Working (std boot, loop_mnt, pxe) with copytoram=[y|n].
NEEDS: initscript > 2011.07.3, mkinitcpio > 0.7.2, mkinitcpio-busybox > 1.18.5-1
Purpose: we need this for propertly unmount $cow_device,
used for persistent dm-snapshot devices.
This hook is based on work from Tom Gundersen[#1],
but adapted for archiso things (specially the shutdown script)
[#1] http://mailman.archlinux.org/pipermail/arch-projects/2011-July/001549.html
[#2] http://projects.archlinux.org/initscripts.git/commit/?id=1fa7b4b453e96533ae1db3630031285e5fc302b3
[#3] http://mailman.archlinux.org/pipermail/arch-projects/2011-August/001749.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Support img_label=
* Allow use img_dev= as cow_device=
* Use new function _mnt_dev() from archiso.
* Check for error while setting loopback device.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This allow to take control again of these mountpoints outside initramfs.
(i.e: on deinitramfs stage at shutdown for unmount it)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Add some options to control where all COW files will be located.
Until this moment all files are located in a tmpfs filesystem.
Now is posible to set a device via a filesystem label or device node
plus a directory, where all these files will be stored.
All dm-snapshot devices will be persistent by default,
but this can be changed if wanted.
Take care, a filesystem that does not support sparse files maybe
is not the best choice for COW files, because they are created with
the same size (is apparent) like the read-only device (the image.fs inside .sfs).
Of course sooner or later, depending on use, these files actually end up
being as big as the read-only device.
KNOW-ISSUE: On shutdown in step "Unmounting Filesystems" will [FAIL],
all filesystem except $cow_device, will be unmounted/remounted-ro.
For this reason this change needs an archiso_shutdown hook, thats
unmount all block devices used by archiso. (Work in progress)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Preparing terrain for UEFI support.
* Also make isohybrid hack in one step.
* Removed UDF layer, since xorriso does not support it.
* Removed unsupported options by xorriso (-uid/-gid/-allow-limited-size)
* Removed option already default in xorriso (-input-charset utf-8)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
usage ./build.sh [options] command <command options>
General options:
-N <iso_name> Set an iso filename (prefix)
Default: archlinux
-V <iso_version> Set an iso version (in filename)
Default: 2011.08.18
-L <iso_label> Set an iso label (disk label)
Default: ARCH_201108
-D <install_dir> Set an install_dir (directory inside iso)
Default: arch
-w <work_dir> Set the working directory
Default: work
-o <out_dir> Set the output directory
Default: out
-v Enable verbose output
-h This help message
Commands:
build <mode> <type>
Build selected .iso by <mode> and <type>
purge <mode>
Clean working directory except iso/ directory of build <mode>
clean <mode>
Clean working directory and .iso file in output directory of build <mode>
Command options:
<mode> Valid values 'single' or 'dual'
<type> Valid values 'netinstall', 'core' or 'all'
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
purge_single command can be usefull to save space during build. It removes
all files in working directory except "iso/" and *.iso.
Workflow can be:
(32) ./build.sh all_iso_single -> i686 *.iso are ready.
(32) ./build.sh purge_single -> safe cleanup.
(64) ./build.sh all_iso_single -> x86_64 *.iso are ready.
(64) ./build.sh purge_single -> safe cleanup.
(any) ./build.sh all_iso_dual -> dual *.iso are ready.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Default value is "arch". This implies that all device mapper node
for snapshot devices will be for example: arch_root-image.
This helps AIF to hidden these devices from "Device Configuration".
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Requested at FS#25051
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Added boot parameters.
* Reorder and clarify build steps.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Use device mapper + snapshot module, instead union layer filesystem.
* A block-level approach vs vfs-level.
* No more unofficial (Linux) things.
* More memory is needed.
* Refactor mkarchiso.
* Refactor hooks/archiso.
* Fix install/archiso_pxe_nbd
(due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules())
[Thanks Dave for the improved workaround]
* New configs/releng to build official images.
* Works with a Bash script instead of Makefile.
(better control and easy to maintain)
* Remove configs/syslinux-iso.
* Remove archiso2dual script. Integrate functionality in configs/releng.
* New configs/baseline to build the most basic live medium or use as template.
* New README (draft). [Thanks Dieter for fixing english grammar]
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Register a mount_hook if booted via PXE. This allows to do all needed
steps before and after calling archiso_mount_handler.
* umount and disconnect network device if copytoram=y
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
aufs2 module is now splited from kernel26-2.6.31-ARCH.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Done to better reflect and indicate current progress.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
[Fixed menu.lst: LiveCD -> Live CD -aaron]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Some rudimentary documentation that mkarchiso -h doesn't
quite cover. Poor humor comes free with the deal.
Signed-off-by: Simo Leone <simo@archlinux.org>
|