| index : archiso32 | |
| Archlinux32 iso tools | gitolite user |
| summaryrefslogtreecommitdiff |
diff --git a/configs/releng/airootfs/etc/mkinitcpio.conf b/configs/releng/airootfs/etc/mkinitcpio.conf deleted file mode 100644 index 96a8752..0000000 --- a/configs/releng/airootfs/etc/mkinitcpio.conf +++ /dev/null @@ -1,67 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES=(piix ide_disk reiserfs) -MODULES=() - -# BINARIES -# This setting includes any additional binaries a given user may -# wish into the CPIO image. This is run last, so it may be used to -# override the actual binaries included by a given hook -# BINARIES are dependency parsed, so you may safely ignore libraries -BINARIES=() - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in any way. This is useful for config files. -FILES=() - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -## This setup specifies all modules in the MODULES setting above. -## No raid, lvm2, or encrypted root is needed. -# HOOKS=(base) -# -## This setup will autodetect all modules for your system and should -## work as a sane default -# HOOKS=(base udev autodetect block filesystems) -# -## This setup will generate a 'full' image which supports most systems. -## No autodetection is done. -# HOOKS=(base udev block filesystems) -# -## This setup assembles a pata mdadm array with an encrypted root FS. -## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. -# HOOKS=(base udev block mdadm encrypt filesystems) -# -## This setup loads an lvm2 volume group on a usb device. -# HOOKS=(base udev block lvm2 filesystems) -# -## NOTE: If you have /usr on a separate partition, you MUST include the -# usr, fsck and shutdown hooks. -HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard) - -# COMPRESSION -# Use this to compress the initramfs image. By default, gzip compression -# is used. Use 'cat' to create an uncompressed image. -#COMPRESSION="gzip" -#COMPRESSION="bzip2" -#COMPRESSION="lzma" -COMPRESSION="xz" -#COMPRESSION="lzop" -#COMPRESSION="lz4" -#COMPRESSION="zstd" - -# COMPRESSION_OPTIONS -# Additional options for the compressor -#COMPRESSION_OPTIONS=() diff --git a/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf b/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf new file mode 100644 index 0000000..98dd514 --- /dev/null +++ b/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf @@ -0,0 +1,2 @@ +HOOKS=(base udev microcode modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard) +COMPRESSION="xz" diff --git a/configs/releng/airootfs/etc/mkinitcpio.d/linux.preset b/configs/releng/airootfs/etc/mkinitcpio.d/linux.preset index 9f67184..8e85205 100644 --- a/configs/releng/airootfs/etc/mkinitcpio.d/linux.preset +++ b/configs/releng/airootfs/etc/mkinitcpio.d/linux.preset @@ -3,6 +3,6 @@ PRESETS=('archiso') ALL_kver='/boot/vmlinuz-linux' -ALL_config='/etc/mkinitcpio.conf' +archiso_config='/etc/mkinitcpio.conf.d/archiso.conf' archiso_image="/boot/initramfs-linux.img" diff --git a/configs/releng/airootfs/etc/ssh/sshd_config b/configs/releng/airootfs/etc/ssh/sshd_config deleted file mode 100644 index dc22c11..0000000 --- a/configs/releng/airootfs/etc/ssh/sshd_config +++ /dev/null @@ -1,116 +0,0 @@ -# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key -#HostKey /etc/ssh/ssh_host_ed25519_key - -# Ciphers and keying -#RekeyLimit default none - -# Logging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin yes -#StrictModes yes -#MaxAuthTries 6 -#MaxSessions 10 - -#PubkeyAuthentication yes - -# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 -# but this is overridden so installations will only check .ssh/authorized_keys -AuthorizedKeysFile .ssh/authorized_keys - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -#PermitEmptyPasswords no - -# Change to no to disable s/key passwords -KbdInteractiveAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the KbdInteractiveAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via KbdInteractiveAuthentication may bypass -# the setting of "PermitRootLogin prohibit-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and KbdInteractiveAuthentication to 'no'. -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PermitTTY yes -PrintMotd no -#PrintLastLog yes -#TCPKeepAlive yes -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS no -#PidFile /run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# override default of no subsystems -Subsystem sftp /usr/lib/ssh/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# PermitTTY no -# ForceCommand cvs server diff --git a/configs/releng/airootfs/etc/ssh/sshd_config.d/10-archiso.conf b/configs/releng/airootfs/etc/ssh/sshd_config.d/10-archiso.conf new file mode 100644 index 0000000..6ea7b41 --- /dev/null +++ b/configs/releng/airootfs/etc/ssh/sshd_config.d/10-archiso.conf @@ -0,0 +1,3 @@ +# Allow root login using password authentication +PasswordAuthentication yes +PermitRootLogin yes diff --git a/configs/releng/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf b/configs/releng/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf new file mode 100644 index 0000000..0e9ceb4 --- /dev/null +++ b/configs/releng/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf @@ -0,0 +1,2 @@ +[Network] +IPv6PrivacyExtensions=yes diff --git a/configs/releng/airootfs/etc/systemd/network/20-ethernet.network b/configs/releng/airootfs/etc/systemd/network/20-ethernet.network index 9ada778..d3a3271 100644 --- a/configs/releng/airootfs/etc/systemd/network/20-ethernet.network +++ b/configs/releng/airootfs/etc/systemd/network/20-ethernet.network @@ -5,9 +5,12 @@ Name=en* Name=eth* +[Link] +RequiredForOnline=routable + [Network] DHCP=yes -IPv6PrivacyExtensions=yes +MulticastDNS=yes # systemd-networkd does not set per-interface-type default route metrics # https://github.com/systemd/systemd/issues/17698 diff --git a/configs/releng/airootfs/etc/systemd/network/20-wlan.network b/configs/releng/airootfs/etc/systemd/network/20-wlan.network index 601d5b8..8b70a95 100644 --- a/configs/releng/airootfs/etc/systemd/network/20-wlan.network +++ b/configs/releng/airootfs/etc/systemd/network/20-wlan.network @@ -1,9 +1,12 @@ [Match] Name=wl* +[Link] +RequiredForOnline=routable + [Network] DHCP=yes -IPv6PrivacyExtensions=yes +MulticastDNS=yes # systemd-networkd does not set per-interface-type default route metrics # https://github.com/systemd/systemd/issues/17698 diff --git a/configs/releng/airootfs/etc/systemd/network/20-wwan.network b/configs/releng/airootfs/etc/systemd/network/20-wwan.network index 9104c24..6e1c8dd 100644 --- a/configs/releng/airootfs/etc/systemd/network/20-wwan.network +++ b/configs/releng/airootfs/etc/systemd/network/20-wwan.network @@ -1,9 +1,11 @@ [Match] Name=ww* +[Link] +RequiredForOnline=routable + [Network] DHCP=yes -IPv6PrivacyExtensions=yes # systemd-networkd does not set per-interface-type default route metrics # https://github.com/systemd/systemd/issues/17698 diff --git a/configs/releng/airootfs/etc/systemd/resolved.conf.d/archiso.conf b/configs/releng/airootfs/etc/systemd/resolved.conf.d/archiso.conf new file mode 100644 index 0000000..636f3bd --- /dev/null +++ b/configs/releng/airootfs/etc/systemd/resolved.conf.d/archiso.conf @@ -0,0 +1,4 @@ +# Default systemd-resolved configuration for archiso + +[Resolve] +MulticastDNS=yes diff --git a/configs/releng/airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount b/configs/releng/airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount index 0ba0e67..038961e 100644 --- a/configs/releng/airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount +++ b/configs/releng/airootfs/etc/systemd/system/etc-pacman.d-gnupg.mount @@ -2,7 +2,7 @@ Description=Temporary /etc/pacman.d/gnupg directory [Mount] -What=ramfs +What=tmpfs Where=/etc/pacman.d/gnupg -Type=ramfs -Options=mode=0755 +Type=tmpfs +Options=mode=0755,noswap diff --git a/configs/releng/airootfs/etc/systemd/system/sockets.target.wants/pcscd.socket b/configs/releng/airootfs/etc/systemd/system/sockets.target.wants/pcscd.socket new file mode 120000 index 0000000..3897c63 --- /dev/null +++ b/configs/releng/airootfs/etc/systemd/system/sockets.target.wants/pcscd.socket @@ -0,0 +1 @@ +/usr/lib/systemd/system/pcscd.socket
\ No newline at end of file |