| index : archiso32 | |
| Archlinux32 iso tools | gitolite user |
| summaryrefslogtreecommitdiff |
diff --git a/configs/baseline/airootfs/etc/mkinitcpio.conf b/configs/baseline/airootfs/etc/mkinitcpio.conf new file mode 100644 index 0000000..34b1a06 --- /dev/null +++ b/configs/baseline/airootfs/etc/mkinitcpio.conf @@ -0,0 +1,67 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(piix ide_disk reiserfs) +MODULES=() + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect block filesystems) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev block filesystems) +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS=(base udev block mdadm encrypt filesystems) +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS=(base udev block lvm2 filesystems) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +HOOKS=(base udev modconf archiso block filesystems) + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" +#COMPRESSION="zstd" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() diff --git a/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset b/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset new file mode 100644 index 0000000..9f67184 --- /dev/null +++ b/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset @@ -0,0 +1,8 @@ +# mkinitcpio preset file for the 'linux' package on archiso + +PRESETS=('archiso') + +ALL_kver='/boot/vmlinuz-linux' +ALL_config='/etc/mkinitcpio.conf' + +archiso_image="/boot/initramfs-linux.img" diff --git a/configs/baseline/airootfs/etc/ssh/sshd_config b/configs/baseline/airootfs/etc/ssh/sshd_config new file mode 100644 index 0000000..93f7d63 --- /dev/null +++ b/configs/baseline/airootfs/etc/ssh/sshd_config @@ -0,0 +1,116 @@ +# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options override the +# default value. + +#Port 22 +#AddressFamily any +#ListenAddress 0.0.0.0 +#ListenAddress :: + +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_ecdsa_key +#HostKey /etc/ssh/ssh_host_ed25519_key + +# Ciphers and keying +#RekeyLimit default none + +# Logging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin yes +#StrictModes yes +#MaxAuthTries 6 +#MaxSessions 10 + +#PubkeyAuthentication yes + +# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 +# but this is overridden so installations will only check .ssh/authorized_keys +AuthorizedKeysFile .ssh/authorized_keys + +#AuthorizedPrincipalsFile none + +#AuthorizedKeysCommand none +#AuthorizedKeysCommandUser nobody + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +#HostbasedAuthentication no +# Change to yes if you don't trust ~/.ssh/known_hosts for +# HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# To disable tunneled clear text passwords, change to no here! +#PasswordAuthentication yes +#PermitEmptyPasswords no + +# Change to no to disable s/key passwords +#KbdInteractiveAuthentication yes + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the KbdInteractiveAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via KbdInteractiveAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and KbdInteractiveAuthentication to 'no'. +UsePAM yes + +#AllowAgentForwarding yes +#AllowTcpForwarding yes +#GatewayPorts no +#X11Forwarding no +#X11DisplayOffset 10 +#X11UseLocalhost yes +#PermitTTY yes +PrintMotd no # pam does that +#PrintLastLog yes +#TCPKeepAlive yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS no +#PidFile /run/sshd.pid +#MaxStartups 10:30:100 +#PermitTunnel no +#ChrootDirectory none +#VersionAddendum none + +# no default banner path +#Banner none + +# override default of no subsystems +Subsystem sftp /usr/lib/ssh/sftp-server + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# PermitTTY no +# ForceCommand cvs server diff --git a/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network b/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network new file mode 100644 index 0000000..e8842f2 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network @@ -0,0 +1,7 @@ +[Match] +Name=en* +Name=eth* + +[Network] +DHCP=yes +IPv6PrivacyExtensions=yes diff --git a/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-config.service b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-config.service new file mode 120000 index 0000000..ebc50f0 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-config.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/cloud-config.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-final.service b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-final.service new file mode 120000 index 0000000..80fa3c8 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-final.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/cloud-final.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init-local.service b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init-local.service new file mode 120000 index 0000000..dd8e9f1 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init-local.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/cloud-init-local.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init.service b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init.service new file mode 120000 index 0000000..24c7a26 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/cloud-init.target.wants/cloud-init.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/cloud-init.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/qemu-guest-agent.service b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/qemu-guest-agent.service new file mode 120000 index 0000000..8e3ff80 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/qemu-guest-agent.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/qemu-guest-agent.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/sshd.service b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/sshd.service new file mode 120000 index 0000000..d21ebd9 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/sshd.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/sshd.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-networkd.service b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-networkd.service new file mode 120000 index 0000000..4c158e6 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-networkd.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/systemd-networkd.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-resolved.service b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-resolved.service new file mode 120000 index 0000000..4f6ae34 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/systemd-resolved.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/systemd-resolved.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/vboxservice.service b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/vboxservice.service new file mode 120000 index 0000000..cb2d560 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/multi-user.target.wants/vboxservice.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/vboxservice.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service b/configs/baseline/airootfs/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service new file mode 120000 index 0000000..7d6ad92 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/systemd-networkd-wait-online.service
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/sockets.target.wants/systemd-networkd.socket b/configs/baseline/airootfs/etc/systemd/system/sockets.target.wants/systemd-networkd.socket new file mode 120000 index 0000000..51942c8 --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/sockets.target.wants/systemd-networkd.socket @@ -0,0 +1 @@ +/usr/lib/systemd/system/systemd-networkd.socket
\ No newline at end of file diff --git a/configs/baseline/airootfs/etc/systemd/system/systemd-networkd-wait-online.service.d/wait-for-only-one-interface.conf b/configs/baseline/airootfs/etc/systemd/system/systemd-networkd-wait-online.service.d/wait-for-only-one-interface.conf new file mode 100644 index 0000000..c9f9bce --- /dev/null +++ b/configs/baseline/airootfs/etc/systemd/system/systemd-networkd-wait-online.service.d/wait-for-only-one-interface.conf @@ -0,0 +1,6 @@ +# Allow systemd-networkd-wait-online to succeed with one interface, otherwise, if multiple network interfaces exist, +# network-online.target gets needlessly delayed. +# See https://wiki.archlinux.org/title/systemd-networkd#systemd-networkd-wait-online +[Service] +ExecStart= +ExecStart=/usr/lib/systemd/systemd-networkd-wait-online --any diff --git a/configs/baseline/bootstrap_packages.x86_64 b/configs/baseline/bootstrap_packages.x86_64 new file mode 100644 index 0000000..64966d0 --- /dev/null +++ b/configs/baseline/bootstrap_packages.x86_64 @@ -0,0 +1,2 @@ +arch-install-scripts +base diff --git a/configs/baseline/build.sh b/configs/baseline/build.sh deleted file mode 100755 index f2f3922..0000000 --- a/configs/baseline/build.sh +++ /dev/null @@ -1,110 +0,0 @@ -#!/usr/bin/env bash - -set -e -u - -iso_name=archlinux -iso_label="ARCH_$(date +%Y%m)" -iso_version=$(date +%Y.%m.%d) -install_dir=arch -arch=$(uname -m) -work_dir=work -out_dir=out - -script_path="$( cd -P "$( dirname "$(readlink -f "$0")" )" && pwd )" - -umask 0022 - -# Helper function to run make_*() only one time per architecture. -run_once() { - if [[ ! -e "${work_dir}/build.${1}_${arch}" ]]; then - "$1" - touch "${work_dir}/build.${1}_${arch}" - fi -} - -# Setup custom pacman.conf with current cache directories. -make_pacman_conf() { - local _cache_dirs - _cache_dirs=("$(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g')") - sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n "${_cache_dirs[@]}")|g" \ - "${script_path}/pacman.conf" > "${work_dir}/pacman.conf" -} - -# Prepare working directory and copy custom airootfs files (airootfs) -make_custom_airootfs() { - local _airootfs="${work_dir}/airootfs" - mkdir -p -- "${_airootfs}" - - if [[ -d "${script_path}/airootfs" ]]; then - cp -af --no-preserve=ownership -- "${script_path}/airootfs/." "${_airootfs}" - [[ -e "${_airootfs}/etc/shadow" ]] && chmod -f 0400 -- "${_airootfs}/etc/shadow" - [[ -e "${_airootfs}/etc/gshadow" ]] && chmod -f 0400 -- "${_airootfs}/etc/gshadow" - fi -} - -# Packages (airootfs) -make_packages() { - mkarchiso -v -w "${work_dir}" -C "${work_dir}/pacman.conf" -D "${install_dir}" \ - -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install -} - -# Copy mkinitcpio archiso hooks and build initramfs (airootfs) -make_setup_mkinitcpio() { - mkdir -p "${work_dir}/airootfs/etc/initcpio/hooks" - mkdir -p "${work_dir}/airootfs/etc/initcpio/install" - cp /usr/lib/initcpio/hooks/archiso "${work_dir}/airootfs/etc/initcpio/hooks" - cp /usr/lib/initcpio/install/archiso "${work_dir}/airootfs/etc/initcpio/install" - cp "${script_path}/mkinitcpio.conf" "${work_dir}/airootfs/etc/mkinitcpio-archiso.conf" - mkarchiso -v -w "${work_dir}" -D "${install_dir}" \ - -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run -} - -# Prepare ${install_dir}/boot/ -make_boot() { - mkdir -p "${work_dir}/iso/${install_dir}/boot/${arch}" - cp "${work_dir}/airootfs/boot/archiso.img" "${work_dir}/iso/${install_dir}/boot/${arch}/archiso.img" - cp "${work_dir}/airootfs/boot/vmlinuz-linux" "${work_dir}/iso/${install_dir}/boot/${arch}/vmlinuz" -} - -# Prepare /${install_dir}/boot/syslinux -make_syslinux() { - mkdir -p "${work_dir}/iso/${install_dir}/boot/syslinux" - sed "s|%ARCHISO_LABEL%|${iso_label}|g; - s|%INSTALL_DIR%|${install_dir}|g; - s|%ARCH%|${arch}|g" "${script_path}/syslinux/syslinux.cfg" > \ - "${work_dir}/iso/${install_dir}/boot/syslinux/syslinux.cfg" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/ldlinux.c32" "${work_dir}/iso/${install_dir}/boot/syslinux/" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/menu.c32" "${work_dir}/iso/${install_dir}/boot/syslinux/" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/libutil.c32" "${work_dir}/iso/${install_dir}/boot/syslinux/" -} - -# Prepare /isolinux -make_isolinux() { - mkdir -p "${work_dir}/iso/isolinux" - sed "s|%INSTALL_DIR%|${install_dir}|g" "${script_path}/isolinux/isolinux.cfg" > \ - "${work_dir}/iso/isolinux/isolinux.cfg" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/isolinux.bin" "${work_dir}/iso/isolinux/" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/isohdpfx.bin" "${work_dir}/iso/isolinux/" - cp "${work_dir}/airootfs/usr/lib/syslinux/bios/ldlinux.c32" "${work_dir}/iso/isolinux/" -} - -# Build airootfs filesystem image -make_prepare() { - mkarchiso -v -w "${work_dir}" -D "${install_dir}" prepare -} - -# Build ISO -make_iso() { - mkarchiso -v -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso \ - "${iso_name}-${iso_version}-${arch}.iso" -} - -run_once make_custom_airootfs -run_once make_pacman_conf -run_once make_packages -run_once make_setup_mkinitcpio -run_once make_boot -run_once make_syslinux -run_once make_isolinux -run_once make_prepare -run_once make_iso diff --git a/configs/baseline/efiboot/loader/entries/01-archiso-x86_64-linux.conf b/configs/baseline/efiboot/loader/entries/01-archiso-x86_64-linux.conf new file mode 100644 index 0000000..11624b6 --- /dev/null +++ b/configs/baseline/efiboot/loader/entries/01-archiso-x86_64-linux.conf @@ -0,0 +1,4 @@ +title Arch Linux (x86_64, UEFI) +linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux +initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img +options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/baseline/efiboot/loader/entries/02-archiso-x86_64-ram-linux.conf b/configs/baseline/efiboot/loader/entries/02-archiso-x86_64-ram-linux.conf new file mode 100644 index 0000000..d66f5a6 --- /dev/null +++ b/configs/baseline/efiboot/loader/entries/02-archiso-x86_64-ram-linux.conf @@ -0,0 +1,4 @@ +title Arch Linux (x86_64, UEFI) Copy to RAM +linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux +initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img +options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram diff --git a/configs/baseline/efiboot/loader/loader.conf b/configs/baseline/efiboot/loader/loader.conf new file mode 100644 index 0000000..17110fa --- /dev/null +++ b/configs/baseline/efiboot/loader/loader.conf @@ -0,0 +1,2 @@ +timeout 3 +default 01-archiso-x86_64-linux.conf diff --git a/configs/baseline/isolinux/isolinux.cfg b/configs/baseline/isolinux/isolinux.cfg deleted file mode 100644 index 33e8b65..0000000 --- a/configs/baseline/isolinux/isolinux.cfg +++ /dev/null @@ -1,6 +0,0 @@ -PATH /%INSTALL_DIR%/boot/syslinux/ -DEFAULT loadconfig - -LABEL loadconfig - CONFIG /%INSTALL_DIR%/boot/syslinux/syslinux.cfg - APPEND /%INSTALL_DIR%/ diff --git a/configs/baseline/mkinitcpio.conf b/configs/baseline/mkinitcpio.conf deleted file mode 100644 index 279eccb..0000000 --- a/configs/baseline/mkinitcpio.conf +++ /dev/null @@ -1 +0,0 @@ -HOOKS=(base udev archiso block filesystems) diff --git a/configs/baseline/packages.x86_64 b/configs/baseline/packages.x86_64 index d3ad7bf..0a64120 100644 --- a/configs/baseline/packages.x86_64 +++ b/configs/baseline/packages.x86_64 @@ -1,4 +1,10 @@ base +cloud-init linux mkinitcpio +mkinitcpio-archiso +openssh +pv +qemu-guest-agent syslinux +virtualbox-guest-utils-nox diff --git a/configs/baseline/pacman.conf b/configs/baseline/pacman.conf index bbca42f..5ee6c1e 100644 --- a/configs/baseline/pacman.conf +++ b/configs/baseline/pacman.conf @@ -31,10 +31,11 @@ Architecture = auto # Misc options #UseSyslog #Color -#TotalDownload +#NoProgressBar # We cannot check disk space from within a chroot environment #CheckSpace #VerbosePkgLists +ParallelDownloads = 5 # By default, pacman accepts packages signed by keys that its local keyring # trusts (see pacman-key and its man page), as well as unsigned packages. diff --git a/configs/baseline/profiledef.sh b/configs/baseline/profiledef.sh new file mode 100644 index 0000000..d376516 --- /dev/null +++ b/configs/baseline/profiledef.sh @@ -0,0 +1,18 @@ +#!/usr/bin/env bash +# shellcheck disable=SC2034 + +iso_name="archlinux-baseline" +iso_label="ARCH_$(date +%Y%m)" +iso_publisher="Arch Linux <https://archlinux.org>" +iso_application="Arch Linux baseline" +iso_version="$(date +%Y.%m.%d)" +install_dir="arch" +buildmodes=('iso') +bootmodes=('bios.syslinux.mbr' 'bios.syslinux.eltorito' 'uefi-x64.systemd-boot.esp' 'uefi-x64.systemd-boot.eltorito') +arch="x86_64" +pacman_conf="pacman.conf" +airootfs_image_type="erofs" +airootfs_image_tool_options=('-zlz4hc,12') +file_permissions=( + ["/etc/shadow"]="0:0:400" +) diff --git a/configs/baseline/syslinux/syslinux-linux.cfg b/configs/baseline/syslinux/syslinux-linux.cfg new file mode 100644 index 0000000..6bfd0c3 --- /dev/null +++ b/configs/baseline/syslinux/syslinux-linux.cfg @@ -0,0 +1,11 @@ +LABEL arch +MENU LABEL Arch Linux (x86_64, BIOS) +LINUX /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux +INITRD /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% + +LABEL arch-ram +MENU LABEL Arch Linux (x86_64, BIOS) Copy to RAM +LINUX /%INSTALL_DIR%/boot/%ARCH%/vmlinuz-linux +INITRD /%INSTALL_DIR%/boot/%ARCH%/initramfs-linux.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram diff --git a/configs/baseline/syslinux/syslinux.cfg b/configs/baseline/syslinux/syslinux.cfg index 4f7ce4d..561ac7c 100644 --- a/configs/baseline/syslinux/syslinux.cfg +++ b/configs/baseline/syslinux/syslinux.cfg @@ -1,12 +1,9 @@ -UI boot/syslinux/menu.c32 +SERIAL 0 115200 +UI menu.c32 MENU TITLE Arch Linux MENU CLEAR DEFAULT arch TIMEOUT 30 -LABEL arch -MENU LABEL Arch Linux -LINUX boot/%ARCH%/vmlinuz -INITRD boot/%ARCH%/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% +INCLUDE syslinux-linux.cfg |