[archiso] changes for syslinux 6

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

3 files changed, 5 insertions, 5 deletions

diff --git a/docs/README.altbootmethods b/docs/README.altbootmethods
index 3dc8a2c..574e658 100644
--- a/docs/README.altbootmethods
+++ b/docs/README.altbootmethods
@@ -81,7 +81,7 @@ Note: All NIC firmwares should support this.
           --enable-tftp \
           --tftp-root=/run/archiso/bootmnt \
           --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=/arch/boot/syslinux/gpxelinux.0 \
+          --dhcp-boot=/arch/boot/syslinux/lpxelinux.0 \
           --dhcp-option-force=209,boot/syslinux/archiso.cfg \
           --dhcp-option-force=210,/arch/
 
@@ -92,7 +92,7 @@ Note: Not all NIC firmware supports HTTP and DNS (if domain name is used).
 
 # dnsmasq --port=0 \
           --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=http://192.168.0.7/arch/boot/syslinux/gpxelinux.0 \
+          --dhcp-boot=http://192.168.0.7/arch/boot/syslinux/lpxelinux.0 \
           --dhcp-option-force=209,boot/syslinux/archiso.cfg \
           --dhcp-option-force=210,http://192.168.0.7/arch/
 
diff --git a/docs/README.bootparams b/docs/README.bootparams
index 8063bd1..755cc0d 100644
--- a/docs/README.bootparams
+++ b/docs/README.bootparams
@@ -68,11 +68,11 @@ INDEX
 ** hooks/archiso_pxe_common
 
 * ip=               This parameter is setup automatically by PXELINUX
-                    when option "IPAPPEND" is set to 1 or 2 in config.
+                    when option "SYSAPPEND" is set to 1 or 2 in config.
                     ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
                     Default: (set via PXE server)
 * BOOTIF=           This parameter is setup automatically by PXELINUX
-                    when option "IPAPPEND" is set to 2 or 3 in config.
+                    when option "SYSAPPEND" is set to 2 or 3 in config.
                     BOOTIF=<hardware-address-of-boot-interface>
                     Default: (set via PXELINUX)
 * copy_resolvconf=  Copy /etc/resolv.conf from initramfs to live-enviroment.
diff --git a/docs/README.transfer b/docs/README.transfer
index c2883ad..ade083a 100644
--- a/docs/README.transfer
+++ b/docs/README.transfer
@@ -89,7 +89,7 @@ Note: COW is not supported on NTFS.
 # umount <MNT-TARGET-N>
 
 7) Install syslinux MBR boot code on target drive.
-# dd bs=440 count=1 conv=notrunc if=/usr/lib/syslinux/mbr.bin of=<DEV-TARGET>
+# dd bs=440 count=1 conv=notrunc if=/usr/lib/syslinux/bios/mbr.bin of=<DEV-TARGET>
 
 
 * PC-BIOS (ISOHYBRID-MBR):