| Age | Commit message (Collapse) | Author |
|---|
|
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
|
|
Signed-off-by: Alexander Seiler <seileralex@gmail.com>
|
|
|
|
|
|
* Added back xinit for awesome, since it can be used without a greeter, as well as other useful tools we've had in previous releases
* Fixing xinitrc for awesome profile
* Attempting to grab xorg packages when installing the desktop profile
* Spelling error on xorg-server
* Fixed sway value error on seat selection
|
|
rather than become 'None' (#1932)
|
|
* fix: refactor clear_vt100_escape_codes
* fix: check for structure being a dict after handling potential parsing errors
* refactor: use short circuit logic than if-elif-else chains
* fix: use or for nullish moutpoint attribute
* fix: better error handling for JSON from urls and paths
* chore: json_stream_to_structure documentation
* refactor: dry up relative and chroot path for custom command scripts
* refactor: use write_text for pathlib.Path object
* refactor: use sets to find intersection instead of filter and list
* refactor: replace loop with dictionary comprehension in preparing luks partition
* refactor: use walrus operator to check if luks_handler exists
* refactor: use read_text and splitlines for potential Path object
* fix: use keepends in splitlines for compatibility
* fix: use keepends in splitlines for compatibility
* feat: set pacman_conf Path as an attribute of installer
* fix: empty string is a part of any string, avoid tuples
* refactor: use iterator patterns to uncomment multilib and testing blocks
* fix: don't json.loads an already loaded structure
* fix: use fstab_path uniformly in genfstab
* fix: remove unused variable matched
* refactor: create separate class to modify pacman.conf in a single pass
* fix: remove unused attribute pacman_conf from installer
* fix: remove unused attribute pacman_conf from installer
* feat: add persist method for pacman.conf, rewrite only when needed
* fix: use path.write_text for locale.conf
* use `or` operator for nullish new_conf
* refactor: Installer.target is always a pathlib.Path object, do not check for string type
* fix: use Optional[str] in function type definition instead of sumtype of str and None
* fix: mypy type annotation
* fix: make flake8 happy
* chore: move pacman config and repo into pacman module
* refactor: use Pacman object instead of Installer's pacstrap method
* fix: break after first sync
* fix: keep old build script for now
* use nullish operator for base_packages and disk_encryption of Installer
* feat: use shutil.which instead of rolling our own implementation
* fix: check for binary only if list is not empty
* fix: import Enum and fix mypy errors
* refactor: use nullish operator for default values
* refactor: linear search for key in Installer._trace_log only once
* fix: use logs instead of the entirety of self._trace_log when searching for key
* refactor: do not copy slice of bytes for search
* refactor: use rfind only once to iterate over logs, do not raise ValueError in clear_vt100_escape_codes since TYPE_CHECKING will take care of it.
* refactor: try decoding trace log before falling back to strigification
* refactor: use an empty dict as default for callbacks in SysCommand.__init__
* refactor: use nullish or operator for slice start and end when not specified
* refactor: use nullish or operator for SysCommand session
* refactor: use pre-existing decode method in __repr__ for SysCommand
* fix: overindentation
* fix: use shallow copy of callbacks to prevent mutating the key-value relationships of the argument dict
* refactor: use truthy value of self.session is not None for json encoding SysCommand
* refactor: directly assign to SysCommand.session in create_session since it short circuits to True if already present
* refactor: use dict.items() instead of manually retrieving the value using the key
* refactor: user_config_to_json method sounds pretty self explanatory
* refactor: store path validity as boolean for return
* refactor: use pathlib.Path.write_text to write configs to destinations
* fix: cannot use assignment expressions with expression
* fix: use config_output.save for saving both config and creds
* refactor: switch dictionary keys and values for options to avoid redundancy
* refactor: use itertools.takewhile to collect locale.gen entries until the empty line
* refactor: use iterative approach for nvidia driver fix
* refactor: install packages if not nvidia
* refactor: return early if no profile is selected
* refactor: use strip to remove commented lines
* fix: install additional packages only when we have a driver
* fix: path with one command is matched as relative to '.'
* fix: remove translation for debug log
---------
Co-authored-by: Anton Hvornum <anton@hvornum.se>
|
|
* fix: check for helper functions for unsafe encode before falling back to safe encoding
* feat: merge _encode and _unsafe_encode into simple serialization function to avoid immediate json.loads after json.dumps
* fix: use function instead of a serializing class without trying to serialize keys that are unhashable or unsupported
* feat: lazily evaluate serialized value based on key validity
* feat: use dictionary comprehension and predefined compatible types
* fix: handle enum types immediately after dicts
* fix: return stringified object as a default
* doc: update function docstring for serialize_to_dict
* fix: rename serialize_to_dict to jsonify as it serializes to other primitive types as well
|
|
* Cleanup imports and unused code
* Update build check
* Keep deprecation exception
* Simplify logging
---------
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
|
|
* Fix mypy compliance
---------
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
|
|
* Invert mypy files
* Add optional pre-commit hooks
* New profile structure
* Serialize profiles
* Use profile instead of classmethod
* Custom profile setup
* Separator between back
* Support profile import via url
* Move profiles module
* Refactor files
* Remove symlink
* Add user to docker group
* Update schema description
* Handle list services
* mypy fixes
* mypy fixes
* Rename profilesv2 to profiles
* flake8
* mypy again
* Support selecting DM
* Fix mypy
* Cleanup
* Update greeter setting
* Update schema
* Revert toml changes
* Poc external dependencies
* Dependency support
* New encryption menu
* flake8
* Mypy and flake8
* Unify lsblk command
* Update bootloader configuration
* Git hooks
* Fix import
* Pyparted
* Remove custom font setting
* flake8
* Remove default preview
* Manual partitioning menu
* Update structure
* Disk configuration
* Update filesystem
* luks2 encryption
* Everything works until installation
* Btrfsutil
* Btrfs handling
* Update btrfs
* Save encryption config
* Fix pipewire issue
* Update mypy version
* Update all pre-commit
* Update package versions
* Revert audio/pipewire
* Merge master PRs
* Add master changes
* Merge master changes
* Small renaming
* Pull master changes
* Reset disk enc after disk config change
* Generate locals
* Update naming
* Fix imports
* Fix broken sync
* Fix pre selection on table menu
* Profile menu
* Update profile
* Fix post_install
* Added python-pyparted to PKGBUILD, this requires [testing] to be enabled in order to run makepkg. Package still works via python -m build etc.
* Swaped around some setuptools logic in pyproject
Since we define `package-data` and `packages` there should be no need for:
```
[tool.setuptools.packages.find]
where = ["archinstall", "archinstall.*"]
```
* Removed pyproject collisions. Duplicate definitions.
* Made sure pyproject.toml includes languages
* Add example and update README
* Fix pyproject issues
* Generate locale
* Refactor imports
* Simplify imports
* Add profile description and package examples
* Align code
* Fix mypy
* Simplify imports
* Fix saving config
* Fix wrong luks merge
* Refactor installation
* Fix cdrom device loading
* Fix wrongly merged code
* Fix imports and greeter
* Don't terminate on partprobe error
* Use specific path on partprobe from luks
* Update archinstall/lib/disk/device_model.py
Co-authored-by: codefiles <11915375+codefiles@users.noreply.github.com>
* Update archinstall/lib/disk/device_model.py
Co-authored-by: codefiles <11915375+codefiles@users.noreply.github.com>
* Update github workflow to test archinstall installation
* Update sway merge
* Generate locales
* Update workflow
---------
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
Co-authored-by: Anton Hvornum <anton@hvornum.se>
Co-authored-by: Anton Hvornum <anton.feeds+github@gmail.com>
Co-authored-by: codefiles <11915375+codefiles@users.noreply.github.com>
|
|
JsonEncoder and loading it back in we ensure that any recursive objects also meers the json friendly dict criterias. (#1689)
|
|
|
|
* If we encounter a FileNotFoundError, the cmd_history.txt file or parent directory does not exist. This leads to vague errors upstream of cmd executable file not existing if this is the case. Probably this is a valid situation and we should just pass on the error.
|
|
* Rename "peak_output" to "peek_output"
* Added backwards compatability
* Added deprecated warning to peak_output
---------
Co-authored-by: Anton Hvornum <anton@hvornum.se>
|
|
* Updating Partition() information after mount and unmount.
* Cleaned up raw_parted() to gracefully output relevant partition error information.
* Adding timestmap to cmd_history.txt as it's impossible to debug properly otherwise
* Adding more verbose debugging information
* Reinstating the lsblk retry code for PARTUUID and UUID on Partition()'s information
* Added error handling for JSON parsing
|
|
* Moving a partprobe() call to better allow for cache updates
* Trying to improve Partition()._fetch_information()
* Removed a sleep() for debugging purposes
* Tweaked a sleep
|
|
* Changed permissions on the logs stored in /var/log/archinstall. Also cleaned up one of the saves to have the same syntax as the others
* Tweaked secondary encryption password detection logic, as it wouldn't take it from the main arguments[] otherwise.
* Changed permission on cmd_output.txt
* Changed permission on cmd_history.txt
|
|
* A temporary fix for #1200, in the long run we need something like what was mentioned in the issue comments: https://github.com/archlinux/archinstall/issues/1200#issuecomment-1212754806
* Enabled the use of modifier detection and getting it in right
* Mistaken a split
* Adding less strict decoding of output log, this in order to handle the more correct locale generation introduced in this PR.
|
|
wrong. (#1415)
|
|
* Solves issue 1343. Could not locate partition after creation
* Added some flake fixes.
Co-authored-by: Anton Hvornum <anton@hvornum.se>
|
|
|
|
* Restructuring btrfs.py into lib/btrfs/*.py
* Reworking how BTRFS subvolumes get represented, and worked with. Subvolumes are now their own entity which can be used to access it's information, parents or mount location.
* Added BtrfsSubvolume.partition and other stuff.
* Reworking the way luks2().unlock and .format() returns device instances. They should now return BTRFSSubvolume where appropriate.
* Fixed a missing import
* Fixed an issue where mkfs.btrfs wouldn't trigger due to busy disk.
* Fixing subvol mounting without creating a fake instance.
* Added creation of mountpint for btrfs subvolume
* Fixed root detection
* Re-worked mounting into a queue system using frozen mounting calls using lambda
* Removed old mount_subvolume() function
* Removed get_subvolumes_from_findmnt()
* Fixed Partition().subvolumes iteration
* Adding .root to BtrfsSubvolume
* Fixed issue in SysCommandWorker where log output would break and crash execution due to cmd being a string vs list
* Changed return-value from MapperDev.mountpoint to pathlib.Path
|
|
* Added a HSM menu entry, but also a safety check to make sure a FIDO device is connected
* flake8 complaints
* Adding FIDO lookup using cryptenroll listing
* Added systemd-cryptenroll --fido2-device=list
* Removed old _select_hsm call
* Fixed flake8 complaints
* Added support for locking and unlocking with a HSM
* Removed hardcoded paths in favor of PR merge
* Removed hardcoded paths in favor of PR merge
* Fixed mypy complaint
* Flake8 issue
* Added sd-encrypt for HSM and revert back to encrypt when HSM is not used (stability reason)
* Added /etc/vconsole.conf and tweaked fido2_enroll() to use the proper paths
* Spelling error
* Using UUID instead of PARTUUID when using HSM. I can't figure out how to get sd-encrypt to use PARTUUID instead. Added a Partition().part_uuid function. Actually renamed .uuid to .part_uuid and created a .uuid instead.
* Adding missing package libfido2 and removed tpm2-device=auto as it overrides everything and forces password prompt to be used over FIDO2, no matter the order of the options.
* Added some notes to clarify some choices.
* Had to move libfido2 package install to later in the chain, as there's not even a base during mounting :P
|
|
* Made sure remote sourcing works for --creds, --config and --disk-layout.
* Spelling error when moving around source code.
|
|
the parent process moves back to the original working directory, leaving the child process in the target working directory. (#1142)
|
|
disk handling. (#949)
* Renamed all_disks() to all_blockdevices() as it's technically a bit more correct. As it would return partitions as well. And it now distinguishes between BlockDevice() and Partition() when returning values. Also lsblk has been replaced with blkid and glob.glob() on /sys/class/block/
* Added handling of loop devices
* Added device information enrichment
* Removed old code
* Updated the usage of blockdevice.info['type'] to 'DEVTYPE' as per returned by blkid instead of lsblk
* Created a MapperDev() and DMCryptDev() 'disk' classes. This should help differentiate between BlockDevice(), Partition() and crypt-specific devices. Due to some new helper functions (mentioned later) BlockDevice().device_or_backfile has been simplified thanks to the information being pre-existing instead of having to call losetup. BlockDevice().mountpoint has been added as a dummy function. archinstall.enrich_blockdevice_information() has been added to enrich information extracted from blkid. archinstall.uevent() has been created to parse blkdid data when in -o export format, also eats up /sys/class/x/y/uevent data which is of the same format. all_blockdevices() now returns mapper devices found under /dev/mapper/ and properly returns the different types, not just BlockDevice() for everything. archinstall.get_parent_of_partition() has been added, which can translate /dev/sda1 to /dev/sda via strings by using /sys/class/block/ - note here tho that it has to be a blockdevice. Other parents won't return properly. archinstall.find_mountpoint() was created to be able to find mountpoints for a device, rather than the other way around which get_mount_info() handles. find_mountpoint() will convert /dev/sda1 -> /boot for instance, whereas get_mount_info('/boot') will convert /boot -> /dev/sda1. archinstall.get_partitions_in_use() will now properly traverse the entire structure, not just one level deep. This called for the creation of get_all_targets() which will take a dictionary structure and look for 'target': '/path' and return all '/path' values, recursively without being trapped in get_partitions_in_use() which has recursive targets. get_partitions_in_use() now returns a dictionary instead of a list, as it also returns the mountpoint and associated device. It will also prioritize MapperDev over DMCryptDev (as MapperDev is a child of DMCryptDev and can be resolved, other way around is 'trickier').
* Reverted Installer().partitions to return only the partitions. It's a slight speed defecit by not returning the mountpoints directly as {mntpoint: partition}, because the partition.mountpoint is a bit slow. But it avoids breaking legacy code :)
* Fixed a few imports, and added MapperDev.filesystem
* Fixed so that Installer().detect_encryption() uses the new separated logic of MapperDev/DMCryptDev/Partition
* Fixing a translation issue on hostname
* Added DMCryptDev.filesystem
* Added back archinstall.all_disks() for legacy reasons.
* Added a deprecation warning to archinstall.all_disks()
* Added a enrichment check for dm-crypt specific devices, which in turn sets DMCRYPT_NAME on the device information, making it easier to detect and target DMCryptDev when needed. This should avoid issues with loopdevices being detected as DMCryptDev. Also some minor tweaks to variable names on unencrypted setups
* Made debug output hidden without --verbose. Also added get_subvolume_info() which takes a path and returns any 'btrfs subvol show' information on the path
* Partition().subvolumes has been added. Which generates an iterator over potential subvolumes based on mountpoint. Partition().mount_information is now a list of mount-destinations, as one partition should be allowed to be mounted to several places (more commonly used in btrfs subvolumes). BtrfsSubvolume() has been added as a 'device type', which should make it more easy to recognize a BtrfsSubvolume object right out of the gate. Only found from Partition().subvolumes currently.
* Parameter fix for --verbose in log()
* Made sure loopdev devices have a PATH key as well, to make dealing with them as blockdevice as seamless as possible.
* Added backup information grabbing on uninitated devices
* Tweaked backup option if losetup cannot find the blockdev
* looks like losetup doesn't exit with a bad code even when it should. Raising ourselves when information is empty.
* Fixed structure returned from get_blockdevice_uevent()
* Made sure that fallback to blkid and loopdev info returns a PTTYPE (Partition Table Type) that is None, since we can't locate it yet (empty drive). But it's not False either, which is what logic after is looking for
* Deprecated split_bind_name() and added more debugging
* get_partitions_in_use() now only iterates over Partition() objects. And properly checks all mountpoints, not only the first.
* Flipped SysCallError to show the last 500 bytes if data rather than the first, to catch the actual errors.
* Removed anonymous parameters to all_blockdevices()
* Added .mount_information to MapperDev
* Added typing annotations
* Partition().mountpoint is now a @property that will live-report the current mountpoint.
* Removed the need for setting Partition().mountpoint = X when calling .mount() and .unmount(), as it's live-reported instead.
* Added .subvolumes to MapperDev()
* Added debug information
* Muting F841 in helpers.py
* Tweaked debug information in get_mount_info()
* Minimized log output by moving Partition().mountpoint to DEBUG, as partitions are allowed to not be mounted
* Simplified Installer().add_bootloader() to act as a router to the new split function, one for each bootloader type. This since flake8 complained about complexity and I agree that it became to wild.
|
|
* Correct definition of btrfs standard layout
* New version of the FlexibleMenu
* Added new functionality to Selector
* Created a GeneralMenu class
* GlobalMenu is made a child of GeneralMenu
* Some refining in GeneralMenu
secret is now a general function
* log is invoked in GeneralMenu directly
* Correction at GeneralMenu
* Materialize again _setup_selection_menu_options. Gives more room to play
* Callbacks converted as methods
Synch() (data area and menu) decoupled from enable()
and made general before any run
* script swiss added to the patch set
* Only_hd gets a new implementation of the menu
flake8 corrections
* swiss.py description added
* New version of the FlexibleMenu
* Added new functionality to Selector
* Created a GeneralMenu class
* GlobalMenu is made a child of GeneralMenu
* changes from the rebase left dangling
* Modify order of execution between exec_menu and post_processing.
Added selector_name as parameter for exec_menu
* minor corrections to the scripts
* Adapt to PR #874
* Solve issue #936
* make ask_for_a_timezone as synonym to ask_timezone
* Adapted to nationalization framework (PR 893).
String still NOT adapted
* flake8 complains
* Use of archinstall.output_config instead of local copy at swiss.py
* Problems with the last merge
* more flake8 complains. caused by reverted changes re. ask*timezone
* git complains
Co-authored-by: Anton Hvornum <anton@hvornum.se>
|
|
* flexibilize the definition of execution locale for OS commands executed via the SysCommand* interface.
Defined a storage argument which holds the default
Added functions to
unset the program own locales
reset to the program default locales
set a specific locale
A decorator to execute functions in the host locale environment
* rename decorator local_environ to host_locale_environ
created a simmetric decorator c_locale_environ, to make a routine work with the C locale whatever is set
* Correct definition of btrfs standard layout
* Added error handling
* Fixed issue where archinstall.Boot() would raise an exception in vain
* Added debugging for SysCommandWorker()
* Added some debugging
* Tweaking debug a bit
* Tweaking debug
* Adding more debug
* Adding more debug
* Removed some debugging
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Adding more debug
* Removed soem debugging
* Removed soem debugging
* Testing a revert
* Adding back the reverted change, adding lofile
* Redirecting stdout to /dev/null for testing (to avoid interrupting the fork)
* Reverted debug changes
* Testing os.system()
Co-authored-by: Anton Hvornum <anton@hvornum.se>
|
|
* Fixed SysCommandWorker() so that it removes ANSII VT100 escape codes. I also moved package.py into it's own folder, as that's something I want to expand on a lot, so package related stuff should go in there. I created a installed_package() function which gets information about the locally installed package. I changed so that find_packages() and find_package() returns a data-model instead for the package information. This should unify and make sure we detect issues down the line.
* Working on structuring .version constructor that works with BaseModel
* Added version contructors to VersionDef(). Also added __eq__ and __lt__ to LocalPackage() and PackageSearchResult().
* removed debug and added a TODO
* Removed whitespace
* Removed mirror-database function from myrepo
|
|
context, which means SysCommandWorker() never closed the pty, hogging all system handles for it.
|
|
* Btrfs with encrypted partitions.
We have changed installer.mount_ordered_layout into a series of loops
* open the encrypted devices
* manage btrfs subvolumes
* mount whatever
* create kyefiles for encrypted volumes
We have simplified the btrfs subvolume manager
We merged the locale branch as it is needed here
* We allow only the creation of keyfiles if the partition does not contain the root mount point.
Also, adapt examples/only_hd to the new __init__.py
Also, assorted flake8 warnings
* Cleanup code
* Naming schema for encrypted volumes
revert global locale association (provisional)
* We introduce the option of defining mount options in the partition dictionary.
It has forced us to define two new entries in this dictionary:
* format_options (formerly options) for mkfs options and
* mount_options for mount -o ones.
The different meaning of compress between partition and subvolumes is treated
* Function lib/disk/btrfs.py mount_subvolume marked as deprecated
Code cleanup.
* format_options now filesystem.options
* format_options now filesystem.format_options
mount_options nof filesystem.mount_options
* flake8 uncovered a slip in the code
|
|
* Define an standard locale for all the commands executed inside the application
* Allow LC_ALL to be overriden during call
* flake8 corrections
|
|
* Added type annotations for 1/5 of the files.
There's bound to be some issues with type miss-match, will sort that out later.
* Added type hints for 4/5 of the code
* Added type hints for 4.7/5 of the code
* Added type hints for 5/5 of the code base
* Split the linters into individual files
This should help with more clearly show which runner is breaking since they don't share a single common name any longer. Also moved mypy settings into pyproject.toml
* Fixed some of the last flake8 issues
* Missing parameter
* Fixed invalid lookahead types
* __future__ had to be at the top
* Fixed last flake8 issues
|
|
* An update to PR 715, making the handling of the *--mount-point* parameter less error prone.
I added a synomym (accepting the name both with underscore and dash) and ignoring when no value specified
I added it explicitly to the list to accept both the --parm value and --parm=value syntax
DOES NOT check the contents of the parameter
* Explicitly set all the know parameters
* Define explictly all parameters.
Make all non explicitly defined parameters behave as standard parameters, with on exception, names are not changed
Some cleanup of the code
In guided.py the reference to the dry_run parameter is updated to the standard naming convention for parameters
* Linter with flake8. corrections
* Linter with flake8. corrections (II)
* Linter with flake8. corrections (and III)
* Added --disk_layout argument. Was missing
I moved its loading from guided.py to __init__.py as it happens to the other json related arguments
* Better handling of errors during processing of the --disk_layouts parameter.
I define a routine to read an store a JSON file or stream. Tested on disk_layout
* Expand the former commit to all JSON file arguments
* Moved the function we created to read json files/streams to general.py. Add some comments
* flake8. A reference now unneded
* The merge process for the dry-run argument was causing the issue, not solving it
The del is just a cleanup for version upgrade without consequence (I hope)
* flake8 warning
* Correcting the last correction . Worked for old config files, but only for them
* New parameter parsing algorithm. More flexible and accepts multiple arguments (optionallY)
plus some documentation effort
* flake8 warning. For once is significant ( != None to not None)
|
|
mentioned in #819.
|
|
* Fixed some mypy issues regarding SysCommand* and logging
* Fixed imports and undefined variable
|
|
* Added support for storing disk encryption keyfiles and add them to a keyslot.
* Added a luks2().add_key() function in order to inject a keyfile into a keyslot on a encrypted volume.
* Simplified 'missing encryption password' logic in Filesystem(). Added a call to luks2().add_key() after the root-password is set on the volume, to add the keyfile in slot 2
* Adding in password handling in luks2().add_key(). It's required to enter a previous passphrase to unlock the volume and add a new keyslot. Also simplified the handling of partition in Installer().mount_ordered_layout()
* Adding in encryption on all partitions except /boot when encryption is opted in
* Removed setting size on Partition() as it's a read only value. No idea how Partition().size = size hasn't caused an issue before. Removed size=X argument to Partition()
* Added a uniqueness to the loopdevice name. This should ensure that multiple encrypted volumes can be opened at the same time, except for Partition().detect_inner_filesystem() operations which can only happen one at a time since they share namespace. This should never be an issue since archinstall is single threaded and no concurrent operations can/should happen.
* Added partprobe() as part of disk/helpers.py, added a /dev/ -> UUID mapper function called convert_device_to_uuid(path). Added a luks2().crypttab() function that sets up a /etc/crypttab entry.
* Moved the responsability for telling archinstall to generate a keyfile from Filesystem() to user_interaction.py. This should in the future be a user-input based value, and not something the Filesystem() automatically dictates.
* Added a retry mechanism to luks2().encrypt() to avoid having to re-start the installation when a device simply wasn't up yet.
* Swapping UUID= lookup from loopdev to physdev.
|
|
|
|
* Adding a cmd_history.txt log under /var/log/archinstall/ to get a clear picture of which commands was executed.
|
|
* Added multiple `partprobe` calls and added a `.partprobe()` function on partitions, filesystem and blockdevice.
* Adding retry attempts to all UUID related operations tied to the boot process
* Tweaked logging for mounting and disk related operations
* Removed potential SysCall exception disruptor causing exceptions to go by unnoticed
* Increased the start position from 1MiB to 5MiB of /boot partition
* Optimized the GRUB installation & config code
* Improved Partition().uuid to never return None. Instead it will raise an exception if it can't get a PARTUUID within X retries with Y delay per attempt.
* Increased sleep timer for partition uuid retrieval, because even with a 3 second sleep it wasn't long enough even on fast devices.
* Make GRUB install to /dev/sda instead of /dev/sda1.
* Added 10 retries for retreiving PARTUUID with a one second sleep. Instead of increasing the sleep simply add more retries until we find a good balance on slower disks.
|
|
|
|
from user_configuration.json into user_credentials.json. As well as the JSON serializer will omit the credentials from the user_configuration.json by detecting ! in the dictionary keys (which is why they are important). UNSAFE_JSON will leave those keys in there, good for storing credentials in a separate file."
|
|
mostly how we called things in guided.py but also some SysCommand calls
|
|
|
|
|
|
|
|
positions of partitions to 1MiB in.
|
|
|
|
Introduces the use of HTTP mirrors additionally
|