| index : archinstall32 | |
| Archlinux32 installer | gitolite user |
| summaryrefslogtreecommitdiff |
| -rw-r--r-- | archinstall/lib/disk.py | 667 | ||||
| -rw-r--r-- | archinstall/lib/general.py | 12 | ||||
| -rw-r--r-- | archinstall/lib/hardware.py | 18 | ||||
| -rw-r--r-- | archinstall/lib/installer.py | 25 | ||||
| -rw-r--r-- | archinstall/lib/luks.py | 7 | ||||
| -rw-r--r-- | archinstall/lib/storage.py | 3 | ||||
| -rw-r--r-- | archinstall/lib/user_interaction.py | 235 |
diff --git a/archinstall/lib/disk.py b/archinstall/lib/disk.py index 17ffe762..c86bf7bc 100644 --- a/archinstall/lib/disk.py +++ b/archinstall/lib/disk.py @@ -2,7 +2,6 @@ import glob import pathlib import re import time -from collections import OrderedDict from typing import Optional from .general import * @@ -14,10 +13,218 @@ GPT = 0b00000001 MBR = 0b00000010 -# import ctypes -# import ctypes.util -# libc = ctypes.CDLL(ctypes.util.find_library('c'), use_errno=True) -# libc.mount.argtypes = (ctypes.c_char_p, ctypes.c_char_p, ctypes.c_char_p, ctypes.c_ulong, ctypes.c_char_p) +def valid_parted_position(pos :str): + if not len(pos): + return False + + if pos.isdigit(): + return True + + if pos[-1] == '%' and pos[:-1].isdigit(): + return True + + if pos[-3:].lower() in ['mib', 'kib', 'b', 'tib'] and pos[:-3].replace(".", "", 1).isdigit(): + return True + + if pos[-2:].lower() in ['kb', 'mb', 'gb', 'tb'] and pos[:-2].replace(".", "", 1).isdigit(): + return True + + return False + +def valid_fs_type(fstype :str) -> bool: + # https://www.gnu.org/software/parted/manual/html_node/mkpart.html + # Above link doesn't agree with `man parted` /mkpart documentation: + """ + fs-type can + be one of "btrfs", "ext2", + "ext3", "ext4", "fat16", + "fat32", "hfs", "hfs+", + "linux-swap", "ntfs", "reis‐ + erfs", "udf", or "xfs". + """ + + return fstype.lower() in [ + "btrfs", + "ext2", + "ext3", "ext4", # `man parted` allows these + "fat16", "fat32", + "hfs", "hfs+", # "hfsx", not included in `man parted` + "linux-swap", + "ntfs", + "reiserfs", + "udf", # "ufs", not included in `man parted` + "xfs", # `man parted` allows this + ] + + +def sort_block_devices_based_on_performance(block_devices): + result = {device: 0 for device in block_devices} + + for device, weight in result.items(): + if device.spinning: + weight -= 10 + else: + weight += 5 + + if device.bus_type == 'nvme': + weight += 20 + elif device.bus_type == 'sata': + weight += 10 + + result[device] = weight + + return result + +def filter_disks_below_size_in_gb(devices, gigabytes): + for disk in devices: + if disk.size >= gigabytes: + yield disk + +def select_largest_device(devices, gigabytes, filter_out=None): + if not filter_out: + filter_out = [] + + copy_devices = [*devices] + for filter_device in filter_out: + if filter_device in copy_devices: + copy_devices.pop(copy_devices.index(filter_device)) + + copy_devices = list(filter_disks_below_size_in_gb(copy_devices, gigabytes)) + + if not len(copy_devices): + return None + + return max(copy_devices, key=(lambda device : device.size)) + +def select_disk_larger_than_or_close_to(devices, gigabytes, filter_out=None): + if not filter_out: + filter_out = [] + + copy_devices = [*devices] + for filter_device in filter_out: + if filter_device in copy_devices: + copy_devices.pop(copy_devices.index(filter_device)) + + if not len(copy_devices): + return None + + return min(copy_devices, key=(lambda device : abs(device.size - gigabytes))) + +def suggest_single_disk_layout(block_device): + MIN_SIZE_TO_ALLOW_HOME_PART = 40 # Gb + + layout = { + block_device : { + "wipe" : True, + "partitions" : [] + } + } + + layout[block_device]['partitions'].append({ + # Boot + "type" : "primary", + "start" : "1MiB", + "size" : "513MiB", + "boot" : True, + "encrypted" : False, + "format" : True, + "mountpoint" : "/boot", + "filesystem" : { + "format" : "fat32" + } + }) + layout[block_device]['partitions'].append({ + # Root + "type" : "primary", + "start" : "513MiB", + "encrypted" : False, + "format" : True, + "size" : "100%" if block_device.size < MIN_SIZE_TO_ALLOW_HOME_PART else f"{min(block_device.size, 20)*1024}MiB", + "mountpoint" : "/", + "filesystem" : { + "format" : "btrfs" + } + }) + + if block_device.size >= MIN_SIZE_TO_ALLOW_HOME_PART: + layout[block_device]['partitions'].append({ + # Home + "type" : "primary", + "encrypted" : False, + "format" : True, + "start" : f"{min(block_device.size*0.2, 20)*1024}MiB", + "size" : "100%", + "mountpoint" : "/home", + "filesystem" : { + "format" : "btrfs" + } + }) + + return layout + + +def suggest_multi_disk_layout(block_devices): + MIN_SIZE_TO_ALLOW_HOME_PART = 40 # Gb + ARCH_LINUX_INSTALLED_SIZE = 20 # Gb, rough estimate taking in to account user desktops etc. TODO: Catch user packages to detect size? + + block_devices = sort_block_devices_based_on_performance(block_devices).keys() + + home_device = select_largest_device(block_devices, gigabytes=MIN_SIZE_TO_ALLOW_HOME_PART) + root_device = select_disk_larger_than_or_close_to(block_devices, gigabytes=ARCH_LINUX_INSTALLED_SIZE, filter_out=[home_device]) + + log(f"Suggesting multi-disk-layout using {len(block_devices)} disks, where {root_device} will be /root and {home_device} will be /home", level=logging.DEBUG) + + layout = { + root_device : { + "wipe" : True, + "partitions" : [] + }, + home_device : { + "wipe" : True, + "partitions" : [] + }, + } + + layout[root_device]['partitions'].append({ + # Boot + "type" : "primary", + "start" : "1MiB", + "size" : "513MiB", + "boot" : True, + "encrypted" : False, + "format" : True, + "mountpoint" : "/boot", + "filesystem" : { + "format" : "fat32" + } + }) + layout[root_device]['partitions'].append({ + # Root + "type" : "primary", + "start" : "513MiB", + "encrypted" : False, + "format" : True, + "size" : "100%", + "mountpoint" : "/", + "filesystem" : { + "format" : "btrfs" + } + }) + + layout[home_device]['partitions'].append({ + # Home + "type" : "primary", + "encrypted" : False, + "format" : True, + "start" : "4MiB", + "size" : "100%", + "mountpoint" : "/home", + "filesystem" : { + "format" : "btrfs" + } + }) + + return layout class BlockDevice: @@ -30,14 +237,14 @@ class BlockDevice: self.path = path self.info = info self.keep_partitions = True - self.part_cache = OrderedDict() + self.part_cache = {} + # TODO: Currently disk encryption is a BIT misleading. # It's actually partition-encryption, but for future-proofing this # I'm placing the encryption password on a BlockDevice level. - self.encryption_password = None def __repr__(self, *args, **kwargs): - return f"BlockDevice({self.device})" + return f"BlockDevice({self.device}, size={self.size}GB, free_space={'+'.join(part[2] for part in self.free_space)}, bus_type={self.bus_type})" def __iter__(self): for partition in self.partitions: @@ -48,25 +255,36 @@ class BlockDevice: raise KeyError(f'{self} does not contain information: "{key}"') return self.info[key] + def __len__(self): + return len(self.partitions) + + def __lt__(self, left_comparitor): + return self.path < left_comparitor.path + def json(self): """ json() has precedence over __dump__, so this is a way to give less/partial information for user readability. """ - return { - 'path': self.path, - 'size': self.info['size'] if 'size' in self.info else '<unknown>', - 'model': self.info['model'] if 'model' in self.info else '<unknown>' - } + return self.path def __dump__(self): return { - 'path': self.path, - 'info': self.info, - 'partition_cache': self.part_cache + self.path : { + 'partuuid' : self.uuid, + 'wipe' : self.info.get('wipe', None), + 'partitions' : [part.__dump__() for part in self.partitions.values()] + } } @property + def partition_type(self): + output = json.loads(SysCommand(f"lsblk --json -o+PTTYPE {self.path}").decode('UTF-8')) + + for device in output['blockdevices']: + return device['pttype'] + + @property def device(self): """ Returns the actual device-endpoint of the BlockDevice. @@ -78,7 +296,7 @@ class BlockDevice: raise DiskError(f'Could not locate backplane info for "{self.path}"') if self.info['type'] == 'loop': - for drive in json.loads(b''.join(SysCommand(['losetup', '--json'])).decode('UTF_8'))['loopdevices']: + for drive in json.loads(SysCommand(['losetup', '--json']).decode('UTF_8'))['loopdevices']: if not drive['name'] == self.path: continue @@ -100,18 +318,17 @@ class BlockDevice: @property def partitions(self): - o = b''.join(SysCommand(['partprobe', self.path])) + SysCommand(['partprobe', self.path]) - # o = b''.join(sys_command('/usr/bin/lsblk -o name -J -b {dev}'.format(dev=dev))) - o = b''.join(SysCommand(['/usr/bin/lsblk', '-J', self.path])) + result = SysCommand(['/usr/bin/lsblk', '-J', self.path]) - if b'not a block device' in o: + if b'not a block device' in result: raise DiskError(f'Can not read partitions off something that isn\'t a block device: {self.path}') - if not o[:1] == b'{': + if not result[:1] == b'{': raise DiskError('Error getting JSON output from:', f'/usr/bin/lsblk -J {self.path}') - r = json.loads(o.decode('UTF-8')) + r = json.loads(result.decode('UTF-8')) if len(r['blockdevices']) and 'children' in r['blockdevices'][0]: root_path = f"/dev/{r['blockdevices'][0]['name']}" for part in r['blockdevices'][0]['children']: @@ -140,10 +357,65 @@ class BlockDevice: This is more reliable than relying on /dev/disk/by-partuuid as it doesn't seam to be able to detect md raid partitions. """ - lsblk = b''.join(SysCommand(f'lsblk -J -o+UUID {self.path}')) - for partition in json.loads(lsblk.decode('UTF-8'))['blockdevices']: + for partition in json.loads(SysCommand(f'lsblk -J -o+UUID {self.path}').decode('UTF-8'))['blockdevices']: return partition.get('uuid', None) + def convert_size_to_gb(self, size): + units = { + 'P' : lambda s : float(s) * 2048, + 'T' : lambda s : float(s) * 1024, + 'G' : lambda s : float(s), + 'M' : lambda s : float(s) / 1024, + 'K' : lambda s : float(s) / 2048, + 'B' : lambda s : float(s) / 3072, + } + unit = size[-1] + return float(units.get(unit, lambda s : None)(size[:-1])) + + @property + def size(self): + output = json.loads(SysCommand(f"lsblk --json -o+SIZE {self.path}").decode('UTF-8')) + + for device in output['blockdevices']: + return self.convert_size_to_gb(device['size']) + + @property + def bus_type(self): + output = json.loads(SysCommand(f"lsblk --json -o+ROTA,TRAN {self.path}").decode('UTF-8')) + + for device in output['blockdevices']: + return device['tran'] + + @property + def spinning(self): + output = json.loads(SysCommand(f"lsblk --json -o+ROTA,TRAN {self.path}").decode('UTF-8')) + + for device in output['blockdevices']: + return device['rota'] is True + + @property + def free_space(self): + # NOTE: parted -s will default to `cancel` on prompt, skipping any partition + # that is "outside" the disk. in /dev/sr0 this is usually the case with Archiso, + # so the free will ignore the ESP partition and just give the "free" space. + # Doesn't harm us, but worth noting in case something weird happens. + for line in SysCommand(f"parted -s --machine {self.path} print free"): + if 'free' in (free_space := line.decode('UTF-8')): + _, start, end, size, *_ = free_space.strip('\r\n;').split(':') + yield (start, end, size) + + @property + def largest_free_space(self): + info = None + for space_info in self.free_space: + if not info: + info = space_info + else: + # [-1] = size + if space_info[-1] > info[-1]: + info = space_info + return info + def has_partitions(self): return len(self.partitions) @@ -154,7 +426,12 @@ class BlockDevice: return False def flush_cache(self): - self.part_cache = OrderedDict() + self.part_cache = {} + + def get_partition(self, uuid): + for partition in self: + if partition.uuid == uuid: + return partition class Partition: @@ -171,7 +448,7 @@ class Partition: self.size = size # TODO: Refresh? self._encrypted = None self.encrypted = encrypted - self.allow_formatting = False # A fail-safe for unconfigured partitions, such as windows NTFS partitions. + self.allow_formatting = False if mountpoint: self.mount(mountpoint) @@ -206,9 +483,80 @@ class Partition: mount_repr = f", rel_mountpoint={self.target_mountpoint}" if self._encrypted: - return f'Partition(path={self.path}, size={self.size}, real_device={self.real_device}, fs={self.filesystem}{mount_repr})' + return f'Partition(path={self.path}, size={self.size}, PARTUUID={self.uuid}, parent={self.real_device}, fs={self.filesystem}{mount_repr})' else: - return f'Partition(path={self.path}, size={self.size}, fs={self.filesystem}{mount_repr})' + return f'Partition(path={self.path}, size={self.size}, PARTUUID={self.uuid}, fs={self.filesystem}{mount_repr})' + + def __dump__(self): + return { + 'type' : 'primary', + 'PARTUUID' : self.uuid, + 'wipe' : self.allow_formatting, + 'boot' : self.boot, + 'ESP' : self.boot, + 'mountpoint' : self.target_mountpoint, + 'encrypted' : self._encrypted, + 'start' : self.start, + 'size' : self.end, + 'filesystem' : { + 'format' : get_filesystem_type(self.path) + } + } + + @property + def sector_size(self): + output = json.loads(SysCommand(f"lsblk --json -o+LOG-SEC {self.path}").decode('UTF-8')) + + for device in output['blockdevices']: + return device.get('log-sec', None) + + @property + def start(self): + output = json.loads(SysCommand(f"sfdisk --json {self.block_device.path}").decode('UTF-8')) + + for partition in output.get('partitiontable', {}).get('partitions', []): + if partition['node'] == self.path: + return partition['start']# * self.sector_size + + @property + def end(self): + # TODO: Verify that the logic holds up, that 'size' is the size without 'start' added to it. + output = json.loads(SysCommand(f"sfdisk --json {self.block_device.path}").decode('UTF-8')) + + for partition in output.get('partitiontable', {}).get('partitions', []): + if partition['node'] == self.path: + return partition['size']# * self.sector_size + + @property + def boot(self): + output = json.loads(SysCommand(f"sfdisk --json {self.block_device.path}").decode('UTF-8')) + + # Get the bootable flag from the sfdisk output: + # { + # "partitiontable": { + # "label":"dos", + # "id":"0xd202c10a", + # "device":"/dev/loop0", + # "unit":"sectors", + # "sectorsize":512, + # "partitions": [ + # {"node":"/dev/loop0p1", "start":2048, "size":10483712, "type":"83", "bootable":true} + # ] + # } + # } + + for partition in output.get('partitiontable', {}).get('partitions', []): + if partition['node'] == self.path: + return partition.get('bootable', False) + + return False + + @property + def partition_type(self): + lsblk = json.loads(SysCommand(f"lsblk --json -o+PTTYPE {self.path}").decode('UTF-8')) + + for device in lsblk['blockdevices']: + return device['pttype'] @property def uuid(self) -> Optional[str]: @@ -217,8 +565,9 @@ class Partition: This is more reliable than relying on /dev/disk/by-partuuid as it doesn't seam to be able to detect md raid partitions. """ - lsblk = b''.join(SysCommand(f'lsblk -J -o+PARTUUID {self.path}')) - for partition in json.loads(lsblk.decode('UTF-8'))['blockdevices']: + + lsblk = json.loads(SysCommand(f'lsblk -J -o+PARTUUID {self.path}').decode('UTF-8')) + for partition in lsblk['blockdevices']: return partition.get('partuuid', None) return None @@ -237,7 +586,7 @@ class Partition: @property def real_device(self): - for blockdevice in json.loads(b''.join(SysCommand('lsblk -J')).decode('UTF-8'))['blockdevices']: + for blockdevice in json.loads(SysCommand('lsblk -J').decode('UTF-8'))['blockdevices']: if parent := self.find_parent_of(blockdevice, os.path.basename(self.path)): return f"/dev/{parent}" # raise DiskError(f'Could not find appropriate parent for encrypted partition {self}') @@ -248,7 +597,7 @@ class Partition: from .luks import luks2 try: - with luks2(self, 'luksloop', password, auto_unmount=True) as unlocked_device: + with luks2(self, storage.get('ENC_IDENTIFIER', 'ai')+'loop', password, auto_unmount=True) as unlocked_device: return unlocked_device.filesystem except SysCallError: return None @@ -274,39 +623,16 @@ class Partition: return True if files > 0 else False - def safe_to_format(self): - if self.allow_formatting is False: - log(f"Partition {self} is not marked for formatting.", level=logging.DEBUG) - return False - elif self.target_mountpoint == '/boot': - try: - if self.has_content(): - log(f"Partition {self} is a boot partition and has content inside.", level=logging.DEBUG) - return False - except SysCallError as err: - log(err.message, logging.DEBUG) - log(f"Partition {self} was identified as /boot but we could not mount to check for content, continuing!", level=logging.DEBUG) - pass - - return True - def encrypt(self, *args, **kwargs): """ A wrapper function for luks2() instances and the .encrypt() method of that instance. """ from .luks import luks2 - if not self._encrypted: - raise DiskError(f"Attempting to encrypt a partition that was not marked for encryption: {self}") - - if not self.safe_to_format(): - log(f"Partition {self} was marked as protected but encrypt() was called on it!", level=logging.ERROR, fg="red") - return False - handle = luks2(self, None, None) return handle.encrypt(self, *args, **kwargs) - def format(self, filesystem=None, path=None, allow_formatting=None, log_formatting=True): + def format(self, filesystem=None, path=None, log_formatting=True): """ Format can be given an overriding path, for instance /dev/null to test the formatting functionality and in essence the support for the given filesystem. @@ -316,36 +642,30 @@ class Partition: if path is None: path = self.path - if allow_formatting is None: - allow_formatting = self.allow_formatting # To avoid "unable to open /dev/x: No such file or directory" start_wait = time.time() while pathlib.Path(path).exists() is False and time.time() - start_wait < 10: time.sleep(0.025) - if not allow_formatting: - raise PermissionError(f"{self} is not formatable either because instance is locked ({self.allow_formatting}) or a blocking flag was given ({allow_formatting})") - if log_formatting: log(f'Formatting {path} -> {filesystem}', level=logging.INFO) if filesystem == 'btrfs': - o = b''.join(SysCommand(f'/usr/bin/mkfs.btrfs -f {path}')) - if b'UUID' not in o: - raise DiskError(f'Could not format {path} with {filesystem} because: {o}') - self.filesystem = 'btrfs' + if 'UUID:' not in (mkfs := SysCommand(f'/usr/bin/mkfs.btrfs -f {path}').decode('UTF-8')): + raise DiskError(f'Could not format {path} with {filesystem} because: {mkfs}') + self.filesystem = filesystem - elif filesystem == 'vfat': - o = b''.join(SysCommand(f'/usr/bin/mkfs.vfat -F32 {path}')) - if (b'mkfs.fat' not in o and b'mkfs.vfat' not in o) or b'command not found' in o: - raise DiskError(f'Could not format {path} with {filesystem} because: {o}') - self.filesystem = 'vfat' + elif filesystem == 'fat32': + mkfs = SysCommand(f'/usr/bin/mkfs.vfat -F32 {path}').decode('UTF-8') + if ('mkfs.fat' not in mkfs and 'mkfs.vfat' not in mkfs) or 'command not found' in mkfs: + raise DiskError(f"Could not format {path} with {filesystem} because: {mkfs}") + self.filesystem = filesystem elif filesystem == 'ext4': if (handle := SysCommand(f'/usr/bin/mkfs.ext4 -F {path}')).exit_code != 0: - raise DiskError(f'Could not format {path} with {filesystem} because: {b"".join(handle)}') - self.filesystem = 'ext4' + raise DiskError(f"Could not format {path} with {filesystem} because: {handle.decode('UTF-8')}") + self.filesystem = filesystem elif filesystem == 'ext2': if (handle := SysCommand(f'/usr/bin/mkfs.ext2 -F {path}')).exit_code != 0: @@ -354,19 +674,19 @@ class Partition: elif filesystem == 'xfs': if (handle := SysCommand(f'/usr/bin/mkfs.xfs -f {path}')).exit_code != 0: - raise DiskError(f'Could not format {path} with {filesystem} because: {b"".join(handle)}') - self.filesystem = 'xfs' + raise DiskError(f"Could not format {path} with {filesystem} because: {handle.decode('UTF-8')}") + self.filesystem = filesystem elif filesystem == 'f2fs': if (handle := SysCommand(f'/usr/bin/mkfs.f2fs -f {path}')).exit_code != 0: - raise DiskError(f'Could not format {path} with {filesystem} because: {b"".join(handle)}') - self.filesystem = 'f2fs' + raise DiskError(f"Could not format {path} with {filesystem} because: {handle.decode('UTF-8')}") + self.filesystem = filesystem elif filesystem == 'crypto_LUKS': # from .luks import luks2 # encrypted_partition = luks2(self, None, None) # encrypted_partition.format(path) - self.filesystem = 'crypto_LUKS' + self.filesystem = filesystem else: raise UnknownFilesystemFormat(f"Fileformat '{filesystem}' is not yet implemented.") @@ -398,9 +718,9 @@ class Partition: try: if options: - SysCommand(f'/usr/bin/mount -o {options} {self.path} {target}') + SysCommand(f"/usr/bin/mount -o {options} {self.path} {target}") else: - SysCommand(f'/usr/bin/mount {self.path} {target}') + SysCommand(f"/usr/bin/mount {self.path} {target}") except SysCallError as err: raise err @@ -409,7 +729,7 @@ class Partition: def unmount(self): try: - exit_code = SysCommand(f'/usr/bin/umount {self.path}').exit_code + SysCommand(f"/usr/bin/umount {self.path}") except SysCallError as err: exit_code = err.exit_code @@ -481,17 +801,89 @@ class Filesystem: # TODO: https://stackoverflow.com/questions/28157929/how-to-safely-handle-an-exception-inside-a-context-manager if len(args) >= 2 and args[1]: raise args[1] - b''.join(SysCommand('sync')) + SysCommand('sync') return True + def partuuid_to_index(self, uuid): + output = json.loads(SysCommand(f"lsblk --json -o+PARTUUID {self.blockdevice.device}").decode('UTF-8')) + + for device in output['blockdevices']: + for index, partition in enumerate(device['children']): + if partition['partuuid'].lower() == uuid: + return index + + def load_layout(self, layout :dict): + from .luks import luks2 + + # If the layout tells us to wipe the drive, we do so + if layout.get('wipe', False): + if self.mode == GPT: + if not self.parted_mklabel(self.blockdevice.device, "gpt"): + raise KeyError(f"Could not create a GPT label on {self}") + elif self.mode == MBR: + if not self.parted_mklabel(self.blockdevice.device, "msdos"): + raise KeyError(f"Could not create a MSDOS label on {self}") + + # We then iterate the partitions in order + for partition in layout.get('partitions', []): + # We don't want to re-add an existing partition (those containing a UUID already) + if partition.get('format', False) and not partition.get('PARTUUID', None): + print("Adding partition....") + partition['device_instance'] = self.add_partition(partition.get('type', 'primary'), + start=partition.get('start', '1MiB'), # TODO: Revisit sane block starts (4MB for memorycards for instance) + end=partition.get('size', '100%'), + partition_format=partition.get('filesystem', {}).get('format', 'btrfs')) + # TODO: device_instance some times become None + # print('Device instance:', partition['device_instance']) + + elif (partition_uuid := partition.get('PARTUUID')) and (partition_instance := self.blockdevice.get_partition(uuid=partition_uuid)): + print("Re-using partition_instance:", partition_instance) + partition['device_instance'] = partition_instance + else: + raise ValueError(f"{self}.load_layout() doesn't know how to continue without a new partition definition or a UUID ({partition.get('PARTUUID')}) on the device ({self.blockdevice.get_partition(uuid=partition_uuid)}).") + + if partition.get('filesystem', {}).get('format', False): + if partition.get('encrypted', False): + if not partition.get('password'): + if storage['arguments'] == 'silent': + raise ValueError(f"Missing encryption password for {partition['device_instance']}") + else: + from .user_interaction import get_password + partition['password'] = get_password(f"Enter a encryption password for {partition['device_instance']}") + + partition['device_instance'].encrypt(password=partition['password']) + with luks2(partition['device_instance'], storage.get('ENC_IDENTIFIER', 'ai')+'loop', partition['password']) as unlocked_device: + if not partition.get('format'): + if storage['arguments'] == 'silent': + raise ValueError(f"Missing fs-type to format on newly created encrypted partition {partition['device_instance']}") + else: + if not partition.get('filesystem'): + partition['filesystem'] = {} + + if not partition['filesystem'].get('format', False): + while True: + partition['filesystem']['format'] = input(f"Enter a valid fs-type for newly encrypted partition {partition['filesystem']['format']}: ").strip() + if not partition['filesystem']['format'] or valid_fs_type(partition['filesystem']['format']) is False: + pint("You need to enter a valid fs-type in order to continue. See `man parted` for valid fs-type's.") + continue + break + + unlocked_device.format(partition['filesystem']['format']) + elif partition.get('format', False): + partition['device_instance'].format(partition['filesystem']['format']) + + if partition.get('boot', False): + self.set(self.partuuid_to_index(partition['device_instance'].uuid), 'boot on') + def find_partition(self, mountpoint): for partition in self.blockdevice: if partition.target_mountpoint == mountpoint or partition.mountpoint == mountpoint: return partition def raw_parted(self, string: str): - x = SysCommand(f'/usr/bin/parted -s {string}') - return x + if (cmd_handle := SysCommand(f'/usr/bin/parted -s {string}')).exit_code != 0: + log(f"Parted ended with a bad exit code: {cmd_handle}", level=logging.ERROR, fg="red") + return cmd_handle def parted(self, string: str): """ @@ -500,74 +892,47 @@ class Filesystem: :param string: A raw string passed to /usr/bin/parted -s <string> :type string: str """ - return self.raw_parted(string).exit_code - - def use_entire_disk(self, root_filesystem_type='ext4'): - log(f"Using and formatting the entire {self.blockdevice}.", level=logging.DEBUG) - if has_uefi(): - self.add_partition('primary', start='1MiB', end='513MiB', partition_format='fat32') - self.set_name(0, 'EFI') - self.set(0, 'boot on') - # TODO: Probably redundant because in GPT mode 'esp on' is an alias for "boot on"? - # https://www.gnu.org/software/parted/manual/html_node/set.html - self.set(0, 'esp on') - self.add_partition('primary', start='513MiB', end='100%') - - self.blockdevice.partition[0].filesystem = 'vfat' - self.blockdevice.partition[1].filesystem = root_filesystem_type - log(f"Set the root partition {self.blockdevice.partition[1]} to use filesystem {root_filesystem_type}.", level=logging.DEBUG) - - self.blockdevice.partition[0].target_mountpoint = '/boot' - self.blockdevice.partition[1].target_mountpoint = '/' - - self.blockdevice.partition[0].allow_formatting = True - self.blockdevice.partition[1].allow_formatting = True - else: - if not self.parted_mklabel(self.blockdevice.device, "msdos"): - raise KeyError(f"Could not create a MSDOS label on {self}") - - self.add_partition('primary', start='1MiB', end='513MiB', partition_format='ext4') - self.set(0, 'boot on') - self.add_partition('primary', start='513MiB', end='100%') - - self.blockdevice.partition[0].filesystem = 'ext4' # TODO: Up for debate weither or not this should be user-supplied: https://github.com/archlinux/archinstall/pull/595/files - self.blockdevice.partition[1].filesystem = root_filesystem_type - - log(f"Set the boot partition {self.blockdevice.partition[0]} to use filesystem {'ext4'}.", level=logging.DEBUG) - log(f"Set the root partition {self.blockdevice.partition[1]} to use filesystem {root_filesystem_type}.", level=logging.DEBUG) + return self.raw_parted(string).exit_code == 0 - self.blockdevice.partition[0].target_mountpoint = '/boot' - self.blockdevice.partition[1].target_mountpoint = '/' - - self.blockdevice.partition[0].allow_formatting = True - self.blockdevice.partition[1].allow_formatting = True + def use_entire_disk(self, root_filesystem_type='ext4') -> Partition: + # TODO: Implement this with declarative profiles instead. + raise ValueError("Installation().use_entire_disk() has to be re-worked.") def add_partition(self, partition_type, start, end, partition_format=None): - log(f'Adding partition to {self.blockdevice}', level=logging.INFO) + log(f'Adding partition to {self.blockdevice}, {start}->{end}', level=logging.INFO) + + previous_partition_uuids = {partition.uuid for partition in self.blockdevice.partitions.values()} - previous_partitions = self.blockdevice.partitions if self.mode == MBR: if len(self.blockdevice.partitions) > 3: - DiskError("Too many partitions on disk, MBR disks can only have 3 primary partitions") + DiskError("Too many partitions on disk, MBR disks can only have 3 parimary partitions") + if partition_format: - partitioning = self.parted(f'{self.blockdevice.device} mkpart {partition_type} {partition_format} {start} {end}') == 0 + parted_string = f'{self.blockdevice.device} mkpart {partition_type} {partition_format} {start} {end}' else: - partitioning = self.parted(f'{self.blockdevice.device} mkpart {partition_type} {start} {end}') == 0 + parted_string = f'{self.blockdevice.device} mkpart {partition_type} {start} {end}' - if partitioning: + if self.parted(parted_string): start_wait = time.time() - time.sleep(0.025) # Let the new partition come up in the kernel - if time.time() - start_wait > 20: - raise DiskError(f"New partition never showed up after adding new partition on {self} (timeout 10 seconds).") - return True + + while previous_partition_uuids == {partition.uuid for partition in self.blockdevice.partitions.values()}: + if time.time() - start_wait > 10: + raise DiskError(f"New partition never showed up after adding new partition on {self} (timeout 10 seconds).") + time.sleep(0.025) + + + time.sleep(0.5) # Let the kernel catch up with quick block devices (nvme for instance) + return self.blockdevice.get_partition(uuid=(previous_partition_uuids ^ {partition.uuid for partition in self.blockdevice.partitions.values()}).pop()) def set_name(self, partition: int, name: str): return self.parted(f'{self.blockdevice.device} name {partition + 1} "{name}"') == 0 def set(self, partition: int, string: str): + log(f"Setting {string} on (parted) partition index {partition+1}", level=logging.INFO) return self.parted(f'{self.blockdevice.device} set {partition + 1} {string}') == 0 def parted_mklabel(self, device: str, disk_label: str): + log(f"Creating a new partition labling on {device}", level=logging.INFO, fg="yellow") # Try to unmount devices before attempting to run mklabel try: SysCommand(f'bash -c "umount {device}?"') @@ -597,13 +962,15 @@ def device_state(name, *args, **kwargs): # lsblk --json -l -n -o path def all_disks(*args, **kwargs): kwargs.setdefault("partitions", False) - drives = OrderedDict() - # for drive in json.loads(sys_command(f'losetup --json', *args, **lkwargs, hide_from_log=True)).decode('UTF_8')['loopdevices']: - for drive in json.loads(b''.join(SysCommand('lsblk --json -l -n -o path,size,type,mountpoint,label,pkname,model')).decode('UTF_8'))['blockdevices']: + drives = {} + + lsblk = json.loads(SysCommand('lsblk --json -l -n -o path,size,type,mountpoint,label,pkname,model').decode('UTF_8')) + for drive in lsblk['blockdevices']: if not kwargs['partitions'] and drive['type'] == 'part': continue drives[drive['path']] = BlockDevice(drive['path'], drive) + return drives @@ -632,12 +999,10 @@ def harddrive(size=None, model=None, fuzzy=False): def get_mount_info(path) -> dict: try: - output = SysCommand(f'/usr/bin/findmnt --json {path}') + output = SysCommand(f'/usr/bin/findmnt --json {path}').decode('UTF-8') except SysCallError: return {} - output = output.decode('UTF-8') - if not output: return {} @@ -651,14 +1016,12 @@ def get_mount_info(path) -> dict: def get_partitions_in_use(mountpoint) -> list: try: - output = SysCommand(f'/usr/bin/findmnt --json -R {mountpoint}') + output = SysCommand(f"/usr/bin/findmnt --json -R {mountpoint}").decode('UTF-8') except SysCallError: return [] mounts = [] - output = output.decode('UTF-8') - if not output: return [] @@ -674,16 +1037,26 @@ def get_partitions_in_use(mountpoint) -> list: def get_filesystem_type(path): try: - handle = SysCommand(f"blkid -o value -s TYPE {path}") - return b''.join(handle).strip().decode('UTF-8') + return SysCommand(f"blkid -o value -s TYPE {path}").decode('UTF-8').strip() except SysCallError: return None def disk_layouts(): try: - handle = SysCommand("lsblk -f -o+TYPE,SIZE -J") - return json.loads(b''.join(handle).decode('UTF-8')) + return json.loads(SysCommand("lsblk -f -o+TYPE,SIZE -J").decode('UTF-8')) except SysCallError as err: log(f"Could not return disk layouts: {err}") return None + + +def encrypted_partitions(blockdevices :dict) -> bool: + for partition in blockdevices.values(): + if partition.get('encrypted', False): + yield partition + +def find_partition_by_mountpoint(block_devices, relative_mountpoint :str): + for device in block_devices: + for partition in block_devices[device]['partitions']: + if partition.get('mountpoint', None) == relative_mountpoint: + return partition
\ No newline at end of file diff --git a/archinstall/lib/general.py b/archinstall/lib/general.py index 5200033a..1e8fc837 100644 --- a/archinstall/lib/general.py +++ b/archinstall/lib/general.py @@ -71,6 +71,8 @@ def locate_binary(name): raise RequirementError(f"Binary {name} does not exist.") +def json_dumps(*args, **kwargs): + return json.dumps(*args, **{**kwargs, 'cls': JSON}) class JsonEncoder: def _encode(obj): @@ -110,7 +112,6 @@ class JSON(json.JSONEncoder, json.JSONDecoder): def encode(self, obj): return super(JSON, self).encode(self._encode(obj)) - class SysCommandWorker: def __init__(self, cmd, callbacks=None, peak_output=False, environment_vars=None, logfile=None, working_directory='./'): if not callbacks: @@ -318,6 +319,15 @@ class SysCommand: for line in self.session: yield line + def __getitem__(self, key): + if type(key) is slice: + start = key.start if key.start else 0 + end = key.stop if key.stop else len(self.session._trace_log) + + return self.session._trace_log[start:end] + else: + raise ValueError("SysCommand() doesn't have key & value pairs, only slices, SysCommand('ls')[:10] as an example.") + def __repr__(self, *args, **kwargs): return self.session._trace_log.decode('UTF-8') diff --git a/archinstall/lib/hardware.py b/archinstall/lib/hardware.py index 24a6a983..d1f160c7 100644 --- a/archinstall/lib/hardware.py +++ b/archinstall/lib/hardware.py @@ -111,23 +111,17 @@ def has_intel_graphics() -> bool: def cpu_vendor() -> Optional[str]: - cpu_info_raw = SysCommand("lscpu -J") - cpu_info = json.loads(b"".join(cpu_info_raw).decode('UTF-8'))['lscpu'] + for cpu in cpuinfo(): + return cpu.get("vendor_id") - for info in cpu_info: - if info.get('field', None) == "Vendor ID:": - return info.get('data', None) - return + return None def cpu_model() -> Optional[str]: - cpu_info_raw = SysCommand("lscpu -J") - cpu_info = json.loads(b"".join(cpu_info_raw).decode('UTF-8'))['lscpu'] + for cpu in cpuinfo(): + return cpu.get("model name") - for info in cpu_info: - if info.get('field', None) == "Model name:": - return info.get('data', None) - return + return None def sys_vendor() -> Optional[str]: diff --git a/archinstall/lib/installer.py b/archinstall/lib/installer.py index 25b5331a..3efb0499 100644 --- a/archinstall/lib/installer.py +++ b/archinstall/lib/installer.py @@ -57,7 +57,6 @@ class Installer: self.post_base_install = [] storage['session'] = self - self.partitions = get_partitions_in_use(self.target) self.MODULES = [] self.BINARIES = [] @@ -108,6 +107,10 @@ class Installer: self.sync_log_to_install_medium() return False + @property + def partitions(self): + return get_partitions_in_use(self.target) + def sync_log_to_install_medium(self): # Copy over the install log (if there is one) to the install medium if # at least the base has been strapped in, otherwise we won't have a filesystem/structure to copy to. @@ -122,6 +125,23 @@ class Installer: return True + def mount_ordered_layout(self, layouts :dict): + from .luks import luks2 + + mountpoints = {} + for blockdevice in layouts: + for partition in layouts[blockdevice]['partitions']: + mountpoints[partition['mountpoint']] = partition + + for mountpoint in sorted(mountpoints.keys()): + if mountpoints[mountpoint]['encrypted']: + loopdev = storage.get('ENC_IDENTIFIER', 'ai')+'loop' + password = mountpoints[mountpoint]['password'] + with luks2(mountpoints[mountpoint]['device_instance'], loopdev, password, auto_unmount=False) as unlocked_device: + unlocked_device.mount(f"{self.target}{mountpoint}") + else: + mountpoints[mountpoint]['device_instance'].mount(f"{self.target}{mountpoint}") + def mount(self, partition, mountpoint, create_mountpoint=True): if create_mountpoint and not os.path.isdir(f'{self.target}{mountpoint}'): os.makedirs(f'{self.target}{mountpoint}') @@ -425,6 +445,9 @@ class Installer: elif partition.mountpoint == self.target: root_partition = partition + if boot_partition is None and root_partition is None: + raise ValueError(f"Could not detect root (/) or boot (/boot) in {self.target} based on: {self.partitions}") + self.log(f'Adding bootloader {bootloader} to {boot_partition if boot_partition else root_partition}', level=logging.INFO) if bootloader == 'systemd-bootctl': diff --git a/archinstall/lib/luks.py b/archinstall/lib/luks.py index b910bfb2..781bed43 100644 --- a/archinstall/lib/luks.py +++ b/archinstall/lib/luks.py @@ -18,9 +18,6 @@ class luks2: self.mapdev = None def __enter__(self): - # if self.partition.allow_formatting: - # self.key_file = self.encrypt(self.partition, *self.args, **self.kwargs) - # else: if not self.key_file: self.key_file = f"/tmp/{os.path.basename(self.partition.path)}.disk_pw" # TODO: Make disk-pw-file randomly unique? @@ -42,9 +39,6 @@ class luks2: return True def encrypt(self, partition, password=None, key_size=512, hash_type='sha512', iter_time=10000, key_file=None): - if not self.partition.allow_formatting: - raise DiskError(f'Could not encrypt volume {partition} due to it having a formatting lock.') - log(f'Encrypting {partition} (This might take a while)', level=logging.INFO) if not key_file: @@ -132,7 +126,6 @@ class luks2: if os.path.islink(f'/dev/mapper/{mountpoint}'): self.mapdev = f'/dev/mapper/{mountpoint}' unlocked_partition = Partition(self.mapdev, None, encrypted=True, filesystem=get_filesystem_type(self.mapdev), autodetect_filesystem=False) - unlocked_partition.allow_formatting = self.partition.allow_formatting return unlocked_partition def close(self, mountpoint=None): diff --git a/archinstall/lib/storage.py b/archinstall/lib/storage.py index 4e19e4d4..67f8e716 100644 --- a/archinstall/lib/storage.py +++ b/archinstall/lib/storage.py @@ -18,5 +18,6 @@ storage = { 'PROFILE_DB': None, # Used in cases when listing profiles is desired, not mandatory for direct profile grabing. 'LOG_PATH': '/var/log/archinstall', 'LOG_FILE': 'install.log', - 'MOUNT_POINT': '/mnt', + 'MOUNT_POINT': '/mnt/archinstall', + 'ENC_IDENTIFIER': 'ainst' } diff --git a/archinstall/lib/user_interaction.py b/archinstall/lib/user_interaction.py index cebb2775..b017e41a 100644 --- a/archinstall/lib/user_interaction.py +++ b/archinstall/lib/user_interaction.py @@ -9,6 +9,7 @@ import signal import sys import time +from .disk import BlockDevice, valid_fs_type, find_partition_by_mountpoint, suggest_single_disk_layout, suggest_multi_disk_layout, valid_parted_position from .exceptions import * from .general import SysCommand from .hardware import AVAILABLE_GFX_DRIVERS, has_uefi, has_amd_graphics, has_intel_graphics, has_nvidia_graphics @@ -119,7 +120,7 @@ def print_large_list(options, padding=5, margin_bottom=0, separator=': '): def generic_multi_select(options, text="Select one or more of the options above (leave blank to continue): ", sort=True, default=None, allow_empty=False): # Checking if the options are different from `list` or `dict` or if they are empty - if type(options) not in [list, dict]: + if type(options) not in [list, dict, type({}.keys()), type({}.values())]: log(f" * Generic multi-select doesn't support ({type(options)}) as type of options * ", fg='red') log(" * If problem persists, please create an issue on https://github.com/archlinux/archinstall/issues * ", fg='yellow') raise RequirementError("generic_multi_select() requires list or dictionary as options.") @@ -130,6 +131,8 @@ def generic_multi_select(options, text="Select one or more of the options above # After passing the checks, function continues to work if type(options) == dict: options = list(options.values()) + elif type(options) in (type({}.keys()), type({}.values())): + options = list(options) if sort: options = sorted(options) @@ -186,8 +189,23 @@ def generic_multi_select(options, text="Select one or more of the options above except RequirementError as e: log(f" * {e} * ", fg='red') + sys.stdout.write('\n') + sys.stdout.flush() return selected_options +def select_encrypted_partitions(block_devices :dict, password :str) -> dict: + root = find_partition_by_mountpoint(block_devices, '/') + root['encrypted'] = True + root['password'] = password + + return block_devices + + # TODO: Next version perhaps we can support multiple encrypted partitions + #options = [] + #for partition in block_devices.values(): + # options.append({key: val for key, val in partition.items() if val}) + + #print(generic_multi_select(options, f"Choose which partitions to encrypt (leave blank when done): ")) class MiniCurses: def __init__(self, width, height): @@ -536,6 +554,221 @@ def generic_select(options, input_text="Select one of the above by index or abso return selected_option +def partition_overlap(partitions :list, start :str, end :str) -> bool: + # TODO: Implement sanity check + return False + +def get_default_partition_layout(block_devices): + if len(block_devices) == 1: + return suggest_single_disk_layout(block_devices[0]) + else: + return suggest_multi_disk_layout(block_devices) + + # TODO: Implement sane generic layout for 2+ drives + +def manage_new_and_existing_partitions(block_device :BlockDevice) -> dict: + if has_uefi(): + partition_type = 'gpt' + else: + partition_type = 'msdos' + + # log(f"Selecting which partitions to re-use on {block_device}...", fg="yellow", level=logging.INFO) + # partitions = generic_multi_select(block_device.partitions.values(), "Select which partitions to re-use (the rest will be left alone): ", sort=True) + # partitions_to_wipe = generic_multi_select(partitions, "Which partitions do you wish to wipe (multiple can be selected): ", sort=True) + + # mountpoints = {} + # struct = { + # "partitions" : [] + # } + # for partition in partitions: + # mountpoint = input(f"Select a mountpoint (or skip) for {partition}: ").strip() + + # part_struct = {} + # if mountpoint: + # part_struct['mountpoint'] = mountpoint + # if mountpoint == '/boot': + # part_struct['boot'] = True + # if has_uefi(): + # part_struct['ESP'] = True + # elif mountpoint == '/' and + # if partition.uuid: + # part_struct['PARTUUID'] = partition.uuid + # if partition in partitions_to_wipe: + # part_struct['wipe'] = True + + # struct['partitions'].append(part_struct) + + # return struct + + mountpoints = {} + block_device_struct = { + "partitions" : [partition.__dump__() for partition in block_device.partitions.values()] + } + # Test code: [part.__dump__() for part in block_device.partitions.values()] + # TODO: Squeeze in BTRFS subvolumes here + + while True: + modes = [ + "Create a new partition", + f"Suggest partition layout for {block_device}", + "Delete a partition" if len(block_device_struct) else "", + "Clear/Delete all partitions" if len(block_device_struct) else "", + "Assign mount-point for a partition" if len(block_device_struct) else "", + "Mark/Unmark a partition to be formatted (wipes data)" if len(block_device_struct) else "", + "Mark/Unmark a partition as encrypted" if len(block_device_struct) else "", + "Mark/Unmark a partition as bootable (automatic for /boot)" if len(block_device_struct) else "", + "Set desired filesystem for a partition" if len(block_device_struct) else "", + ] + + # Print current partition layout: + if len(block_device_struct["partitions"]): + print('Current partition layout:') + for partition in block_device_struct["partitions"]: + print(partition) + print() + + task = generic_select(modes, + input_text=f"Select what to do with {block_device} (leave blank when done): ") + + if not task: + break + + if task == 'Create a new partition': + if partition_type == 'gpt': + # https://www.gnu.org/software/parted/manual/html_node/mkpart.html + # https://www.gnu.org/software/parted/manual/html_node/mklabel.html + name = input("Enter a desired name for the partition: ").strip() + + fstype = input("Enter a desired filesystem type for the partition: ").strip() + + start = input(f"Enter the start sector (percentage or block number, default: {block_device.largest_free_space[0]}): ").strip() + if not start.strip(): + start = block_device.largest_free_space[0] + end_suggested = block_device.largest_free_space[1] + else: + end_suggested = '100%' + end = input(f"Enter the end sector of the partition (percentage or block number, ex: {end_suggested}): ").strip() + if not end.strip(): + end = end_suggested + + if valid_parted_position(start) and valid_parted_position(end) and valid_fs_type(fstype): + if partition_overlap(block_device_struct["partitions"], start, end): + log(f"This partition overlaps with other partitions on the drive! Ignoring this partition creation.", fg="red") + continue + + block_device_struct["partitions"].append({ + "type" : "primary", # Strictly only allowed under MSDOS, but GPT accepts it so it's "safe" to inject + "start" : start, + "size" : end, + "mountpoint" : None, + "wipe" : True, + "filesystem" : { + "format" : fstype + } + }) + else: + log(f"Invalid start ({valid_parted_position(start)}), end ({valid_parted_position(end)}) or fstype ({valid_fs_type(fstype)}) for this partition. Ignoring this partition creation.", fg="red") + continue + elif task[:len("Suggest partition layout")] == "Suggest partition layout": + if len(block_device_struct["partitions"]): + if input(f"{block_device} contains queued partitions, this will remove those, are you sure? y/N: ").strip().lower() in ('', 'n'): + continue + + block_device_struct["partitions"] = suggest_single_disk_layout(block_device)[block_device] + elif task is None: + return block_device_struct + else: + for index, partition in enumerate(block_device_struct["partitions"]): + print(f"{index}: Start: {partition['start']}, End: {partition['size']} ({partition['filesystem']['format']}{', mounting at: '+partition['mountpoint'] if partition['mountpoint'] else ''})") + + if task == "Delete a partition": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to delete: ', options_output=False)): + del(block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]) + elif task == "Clear/Delete all partitions": + block_device_struct["partitions"] = [] + elif task == "Assign mount-point for a partition": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to mount where: ', options_output=False)): + print(' * Partition mount-points are relative to inside the installation, the boot would be /boot as an example.') + mountpoint = input('Select where to mount partition (leave blank to remove mountpoint): ').strip() + + if len(mountpoint): + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['mountpoint'] = mountpoint + if mountpoint == '/boot': + log(f"Marked partition as bootable because mountpoint was set to /boot.", fg="yellow") + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['boot'] = True + else: + del(block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['mountpoint']) + + elif task == "Mark/Unmark a partition to be formatted (wipes data)": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to mask for formatting: ', options_output=False)): + # If we mark a partition for formatting, but the format is CRYPTO LUKS, there's no point in formatting it really + # without asking the user which inner-filesystem they want to use. Since the flag 'encrypted' = True is already set, + # it's safe to change the filesystem for this partition. + if block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('filesystem', {}).get('format', 'crypto_LUKS') == 'crypto_LUKS': + if not block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('filesystem', None): + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['filesystem'] = {} + + while True: + fstype = input("Enter a desired filesystem type for the partition: ").strip() + if not valid_fs_type(fstype): + log(f"Desired filesystem {fstype} is not a valid filesystem.", level=logging.ERROR, fg="red") + continue + break + + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['filesystem']['format'] = fstype + + # Negate the current wipe marking + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['format'] = not block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('format', False) + + elif task == "Mark/Unmark a partition as encrypted": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to mark as encrypted: ', options_output=False)): + # Negate the current encryption marking + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['encrypted'] = not block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('encrypted', False) + + elif task == "Mark/Unmark a partition as bootable (automatic for /boot)": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to mark as bootable: ', options_output=False)): + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['boot'] = not block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('boot', False) + + elif task == "Set desired filesystem for a partition": + if (partition := generic_select(block_device_struct["partitions"], 'Select which partition to set a filesystem on: ', options_output=False)): + if not block_device_struct["partitions"][block_device_struct["partitions"].index(partition)].get('filesystem', None): + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['filesystem'] = {} + + while True: + fstype = input("Enter a desired filesystem type for the partition: ").strip() + if not valid_fs_type(fstype): + log(f"Desired filesystem {fstype} is not a valid filesystem.", level=logging.ERROR, fg="red") + continue + break + + block_device_struct["partitions"][block_device_struct["partitions"].index(partition)]['filesystem']['format'] = fstype + + return block_device_struct + +def select_individual_blockdevice_usage(block_devices :list): + result = {} + + for device in block_devices: + layout = manage_new_and_existing_partitions(device) + + result[device] = layout + + return result + + +def select_disk_layout(block_devices :list): + modes = [ + "Wipe all selected drives and use a best-effort default partition layout", + "Select what to do with each individual drive (followed by partition usage)" + ] + + mode = generic_select(modes, input_text=f"Select what you wish to do with the selected block devices: ") + + if mode == 'Wipe all selected drives and use a best-effort default partition layout': + return get_default_partition_layout(block_devices) + else: + return select_individual_blockdevice_usage(block_devices) + def select_disk(dict_o_disks): """ |