1 files changed, 359 insertions, 0 deletions
diff --git a/archinstall/locales/en/LC_MESSAGES/base.po~ b/archinstall/locales/en/LC_MESSAGES/base.po~
new file mode 100644
index 00000000..bf321c2a
--- /dev/null
+++ b/archinstall/locales/en/LC_MESSAGES/base.po~
@@ -0,0 +1,359 @@
+#: lib/user_interaction.py:82
+msgid "Do you really want to abort?"
+msgstr ""
+
+#: lib/user_interaction.py:100
+msgid "And one more time for verification: "
+msgstr ""
+
+#: lib/user_interaction.py:271
+msgid "Would you like to use swap on zram?"
+msgstr ""
+
+#: lib/user_interaction.py:277
+msgid ""
+"Would you like to use automatic time synchronization (NTP) with the default "
+"time servers?"
+msgstr ""
+
+#: lib/user_interaction.py:278
+msgid ""
+"Hardware time and other post-configuration steps might be required in order "
+"for NTP to work. For more information, please check the Arch wiki"
+msgstr ""
+
+#: lib/user_interaction.py:284
+msgid "Desired hostname for the installation: "
+msgstr ""
+
+#: lib/user_interaction.py:289
+msgid "Username for required superuser with sudo privileges: "
+msgstr ""
+
+#: lib/user_interaction.py:303 lib/user_interaction.py:320
+msgid "Password for user \"{}\""
+msgstr ""
+
+#: lib/user_interaction.py:309
+msgid "Any additional users to install (leave blank for no users): "
+msgstr ""
+
+#: lib/user_interaction.py:323
+msgid "Should this user be a superuser (sudoer)?"
+msgstr ""
+
+#: lib/user_interaction.py:339
+msgid "Select a timezone"
+msgstr ""
+
+#: lib/user_interaction.py:353
+msgid "Would you like to use GRUB as a bootloader instead of systemd-boot?"
+msgstr ""
+
+#: lib/user_interaction.py:363
+msgid "Choose a bootloader"
+msgstr ""
+
+#: lib/user_interaction.py:379
+msgid "Choose an audio server"
+msgstr ""
+
+#: lib/user_interaction.py:390
+msgid ""
+"Only packages such as base, base-devel, linux, linux-firmware, efibootmgr "
+"and optional profile packages are installed."
+msgstr ""
+
+#: lib/user_interaction.py:391
+msgid ""
+"If you desire a web browser, such as firefox or chromium, you may specify it "
+"in the following prompt."
+msgstr ""
+
+#: lib/user_interaction.py:395
+msgid ""
+"Write additional packages to install (space separated, leave blank to skip): "
+msgstr ""
+
+#: lib/user_interaction.py:418
+msgid "Copy ISO network configuration to installation"
+msgstr ""
+
+#: lib/user_interaction.py:419
+msgid ""
+"Use NetworkManager (necessary to configure internet graphically in GNOME and "
+"KDE)"
+msgstr ""
+
+#: lib/user_interaction.py:427
+msgid "Select one network interface to configure"
+msgstr ""
+
+#: lib/user_interaction.py:440
+msgid ""
+"Select which mode to configure for \"{}\" or skip to use default mode \"{}\""
+msgstr ""
+
+#: lib/user_interaction.py:445
+msgid "Enter the IP and subnet for {} (example: 192.168.0.5/24): "
+msgstr ""
+
+#: lib/user_interaction.py:460
+msgid "Enter your gateway (router) IP address or leave blank for none: "
+msgstr ""
+
+#: lib/user_interaction.py:475
+msgid "Enter your DNS servers (space separated, blank for none): "
+msgstr ""
+
+#: lib/user_interaction.py:509
+msgid "Select which filesystem your main partition should use"
+msgstr ""
+
+#: lib/user_interaction.py:555
+msgid "Current partition layout"
+msgstr ""
+
+#: lib/user_interaction.py:606
+msgid ""
+"Select what to do with\n"
+"{}"
+msgstr ""
+
+#: lib/user_interaction.py:623 lib/user_interaction.py:708
+msgid "Enter a desired filesystem type for the partition"
+msgstr ""
+
+#: lib/user_interaction.py:625
+msgid "Enter the start sector (percentage or block number, default: {}): "
+msgstr ""
+
+#: lib/user_interaction.py:634
+msgid ""
+"Enter the end sector of the partition (percentage or block number, ex: {}): "
+"\""
+msgstr ""
+
+#: lib/user_interaction.py:660
+msgid "{} contains queued partitions, this will remove those, are you sure?"
+msgstr ""
+
+#: lib/user_interaction.py:673
+msgid ""
+"{}\n"
+"\n"
+"Select by index which partitions to delete"
+msgstr ""
+
+#: lib/user_interaction.py:681
+msgid ""
+"{}\n"
+"\n"
+"Select by index which partition to mount where"
+msgstr ""
+
+#: lib/user_interaction.py:685
+msgid ""
+" * Partition mount-points are relative to inside the installation, the boot "
+"would be /boot as an example."
+msgstr ""
+
+#: lib/user_interaction.py:686
+msgid "Select where to mount partition (leave blank to remove mountpoint): "
+msgstr ""
+
+#: lib/user_interaction.py:697
+msgid ""
+"{}\n"
+"\n"
+"Select which partition to mask for formatting"
+msgstr ""
+
+#: lib/user_interaction.py:716
+msgid ""
+"{}\n"
+"\n"
+"Select which partition to mark as encrypted"
+msgstr ""
+
+#: lib/user_interaction.py:724
+msgid ""
+"{}\n"
+"\n"
+"Select which partition to mark as bootable"
+msgstr ""
+
+#: lib/user_interaction.py:731
+msgid ""
+"{}\n"
+"\n"
+"Select which partition to set a filesystem on"
+msgstr ""
+
+#: lib/user_interaction.py:738
+msgid "Enter a desired filesystem type for the partition: "
+msgstr ""
+
+#: lib/user_interaction.py:759
+msgid "Select archinstall language"
+msgstr ""
+
+#: lib/user_interaction.py:764
+msgid "Wipe all selected drives and use a best-effort default partition layout"
+msgstr ""
+
+#: lib/user_interaction.py:765
+msgid ""
+"Select what to do with each individual drive (followed by partition usage)"
+msgstr ""
+
+#: lib/user_interaction.py:768
+msgid "Select what you wish to do with the selected block devices"
+msgstr ""
+
+#: lib/user_interaction.py:821
+msgid ""
+"This is a list of pre-programmed profiles, they might make it easier to "
+"install things like desktop environments"
+msgstr ""
+
+#: lib/user_interaction.py:846
+msgid "Select Keyboard layout"
+msgstr ""
+
+#: lib/user_interaction.py:861
+msgid "Select one of the regions to download packages from"
+msgstr ""
+
+#: lib/user_interaction.py:883
+msgid "Select one or more hard drives to use and configure"
+msgstr ""
+
+#: lib/user_interaction.py:910
+msgid ""
+"For the best compatibility with your AMD hardware, you may want to use "
+"either the all open-source or AMD / ATI options."
+msgstr ""
+
+#: lib/user_interaction.py:912
+msgid ""
+"For the best compatibility with your Intel hardware, you may want to use "
+"either the all open-source or Intel options.\n"
+msgstr ""
+
+#: lib/user_interaction.py:914
+msgid ""
+"For the best compatibility with your Nvidia hardware, you may want to use "
+"the Nvidia proprietary driver.\n"
+msgstr ""
+
+#: lib/user_interaction.py:917
+msgid ""
+"\n"
+"\n"
+"Select a graphics driver or leave blank to install all open-source drivers"
+msgstr ""
+
+#: lib/user_interaction.py:921
+msgid "All open-source (default)"
+msgstr ""
+
+#: lib/user_interaction.py:940
+msgid "Choose which kernels to use or leave blank for default \"{}\""
+msgstr ""
+
+#: lib/user_interaction.py:954
+msgid "Choose which locale language to use"
+msgstr ""
+
+#: lib/user_interaction.py:968
+msgid "Choose which locale encoding to use"
+msgstr ""
+
+#: lib/user_interaction.py:1009
+msgid "Select one of the values shown below: "
+msgstr ""
+
+#: lib/user_interaction.py:1050
+msgid "Select one or more of the options below: "
+msgstr ""
+
+#: lib/menu/selection_menu.py:116
+msgid "Archinstall language"
+msgstr ""
+
+#: lib/menu/selection_menu.py:122
+msgid "Select keyboard layout"
+msgstr ""
+
+#: lib/menu/selection_menu.py:125
+msgid "Select mirror region"
+msgstr ""
+
+#: lib/menu/selection_menu.py:130
+msgid "Select locale language"
+msgstr ""
+
+#: lib/menu/selection_menu.py:132
+msgid "Select locale encoding"
+msgstr ""
+
+#: lib/menu/selection_menu.py:135
+msgid "Select harddrives"
+msgstr ""
+
+#: lib/menu/selection_menu.py:139
+msgid "Select disk layout"
+msgstr ""
+
+#: lib/menu/selection_menu.py:147
+msgid "Set encryption password"
+msgstr ""
+
+#: lib/menu/selection_menu.py:153
+msgid "Use swap"
+msgstr ""
+
+#: lib/menu/selection_menu.py:158
+msgid "Select bootloader"
+msgstr ""
+
+#: lib/menu/selection_menu.py:164
+msgid "Set root password"
+msgstr ""
+
+#: lib/menu/selection_menu.py:169
+msgid "Specify superuser account"
+msgstr ""
+
+#: lib/menu/selection_menu.py:175
+msgid "Specify user account"
+msgstr ""
+
+#: lib/menu/selection_menu.py:181
+msgid "Specify profile"
+msgstr ""
+
+#: lib/menu/selection_menu.py:186
+msgid "Select audio"
+msgstr ""
+
+#: lib/menu/selection_menu.py:190
+msgid "Select kernels"
+msgstr ""
+
+#: lib/menu/selection_menu.py:195
+msgid "Additional packages to install"
+msgstr ""
+
+#: lib/menu/selection_menu.py:200
+msgid "Configure network"
+msgstr ""
+
+#: lib/menu/selection_menu.py:208
+msgid "Set automatic time sync (NTP)"
+msgstr ""
+
+#: lib/user_interaction.py:759 lib/menu/selection_menu.py:116
+msgid "Select Archinstall language"
+msgstr ""